Swap meet...

[Modifiedmark]

Putting feelers out, got a saw here that needs a top end. Its a 10mm 044. Anyone got a cyl for one and maybe a good piston?

 

[struggle]

Looking for a nice clean 562xp/xpg. Have a few saws to trade. Stihl 044/440,046,056mag2,075,076, Husky 385, Homlite 925,xp1000, craftsman 5.2, poulan 4200,Jonsered 2094, mac 105,partner p100, also a hommie 750 parts saw

He's alive..maybe reborn in 2013:msp_w00t:

 

[Arrowhead]

Putting feelers out, got a saw here that needs a top end. Its a 10mm 044. Anyone got a cyl for one and maybe a good piston?

Why not go with aftermarket?

 

[blsnelling]

Why not go with aftermarket?

Oh no you di'int!!!!!!!!! :hmm3grin2orange:

 

[3000 FPS]

Why not go with aftermarket?

You guys show no mercy. :yoyo:

 

[Jacob J.]

Putting feelers out, got a saw here that needs a top end. Its a 10mm 044. Anyone got a cyl for one and maybe a good piston?

I'll check my stash, I might have a good early 044 jug.

 

[Modifiedmark]

Why not go with aftermarket?

:bang:

I'll check my stash, I might have a good early 044 jug.

Let me know if you find a good one, its not my saw though so you can just let me know what you need for it.

Who makes a decent 10mm piston?

 

[barneyrb]

:bang:



Let me know if you find a good one, its not my saw though so you can just let me know what you need for it.

Who makes a decent 10mm piston?

If JJ can't help, I know I've got one. Meteor makes a 10mm piston for that saw..........

http://www.meteorpiston.com/Lists/Gardening/Join.aspx?List=831329fb-c6b1-403e-ab58-966a2b8b6758&ID=564&Source=http%3A%2F%2Fwww.meteorpiston.com%2FLists%2FGardening%2FCatalog.aspx%3FView%3D{CE32560A-49BF-47F8-9CFA-E52252EADD4C}%26FilterField1%3DDiam%255Fx0020%255F%255Fx00d8%255F%26FilterValue1%3D50%252E0000000000000

 

[mdavlee]

I just give away a 10 mm cylindrr before Christmas

 

[Mastermind]

I just give away a 10 mm cylindrr before Christmas

I got a 10mm jug with the corner broked. I have no idea why it's still here.

 

[sefh3]

Anyone have a decompression valve and sealing ring for a TS760 or 076? I have parts to trade.

 

[thomas1]

Why not go with aftermarket?

I tried to rep you, but couldn't.

 

[MS460WOODCHUCK]

I am looking for a 9/16'' pitch chain for an old mall electric chainsaw for a friend. The bar says to use 40.5'' chain for lenth. The length does not need to be perfect and hopefully he can find a tie and strap.

 

[flashhole]

Looking for felling spikes, dogs, dawgs for a Husqvarna 394. Whatch got?

 

[vw_motorsports]

My first bump of 2013:hmm3grin2orange:


Still looking for a Echo cs-670 complete clutch cover and a Cs-510 clutch cover....annnnnnnndd

Like a Dope, bought more saws...more parts I need.

husky 455 parts

mufflers
front wrap handles
rear handles as well.

I have parts and cash

please Pm

thanks

 

[tbone75]

My first bump of 2013:hmm3grin2orange:


Still looking for a Echo cs-670 complete clutch cover and a Cs-510 clutch cover....annnnnnnndd

Like a Dope, bought more saws...more parts I need.

husky 455 parts

mufflers
front wrap handles
rear handles as well.

I have parts and cash

please Pm

thanks

What parts ya got? I have a little 455 stuff left over. Hate to sell anything ! Love to trade !! LOL
2-mufflers,one front wrap,2 rear handles minus the left side halves. Think thats all?

 

[tomdcoker]

I am looking for a 9/16'' pitch chain for an old mall electric chainsaw for a friend. The bar says to use 40.5'' chain for lenth. The length does not need to be perfect and hopefully he can find a tie and strap.

If you find a chain that has the pin type fastner and need a pin let me know. Tom

 

[z71mike]

Hey guys, anyone wanna sell off some 066 parts? I owe my brother a favor, so I'm rebuilding a basket case saw for him. I started the tear-down yesterday and got it down 75% of the way. Spent today cleaning parts in the ultrasonic tub. Here's what I need so far:

brake handle
oil line & pick up body
crank seals
bar mount inner side plate
full clutch pack
clutch drum and 3/8 rim sprocket
clutch cover/outer dawg/deflector/roller catcher
0000-400-1300 coil & standard harness
fuel line & filter
impulse line


That list may get longer after I yank the frozen clutch and expose the oiler. Who's got some decent used parts for me? Thx.

 

[likesaws]

036 p&c

I have a aftermarket P&C for a stihl 036, with decompression valve and base gasket.
Don't know what brand no name purchased from mag supply Erie PA.
about three yr ago on flea bay. What you got to trade chains bar project saw
whatever.

 

[Whiskers]

Putting feelers out, got a saw here that needs a top end. Its a 10mm 044. Anyone got a cyl for one and maybe a good piston?

I've got a nice used OEM 10mm piston and jug. Shoot me a pm if you're interested.