Swap meet...

[mp5n]

Remington SL4 air filter cover

I just picked up a Remington SL4 that is missing the air filter cover. If anyone can help out please let me know.

Thanks,
MP5N

 

[c_silva88]

Looking for a 034, 036, 360 project have alot of 50cc stihl parts an 021 runner or cash

 

[Wagnerwerks]

it has a broken rear handle but otherwise is complete.

Looking for Poulan 3400 parts.

What 3400 parts do you need?

 

[crane]

I just picked up a Remington SL4 that is missing the air filter cover. If anyone can help out please let me know.

Thanks,
MP5N

I have a black embossed "Power Lite" cover that will fit. It's from the earlier PL series, but is interchangeable.PM me if interested.

 

[Cannon51]

I need some parts for a few saws.
Poulan 46cc-20, need a sprocket covet and a heat shield.

Homelite, need the decompression linkage. I got this saw from my BIL after his basement flooded, took it apart but didn't put the linkage back on. Now I can't find it.

Craftsman/Roper 3.7, Bought this for a parts saw but it's all there. Has no spark so I tried to cobble a coil together but it failed. Need a coil likeView attachment 316401View attachment 316402View attachment 316403 the blue one.
Cannon

I'm just bumping this up once since the site seems to be working better now.
Cannon

 

[psuiewalsh]

I have a windsor labeled grinder for trade. Works in either direction. Includes the 3 wheels. I am looking for a decent 50cc type saw. Prefer husky 350 types or Stihl 026/034 as I have spare parts for them.

Trade pending.

 

[7hpjim]

I have a windsor labeled grinder for trade. Works in either direction. Includes the 3 wheels. I am looking for a decent 50cc type saw. Prefer husky 350 types or Stihl 026/034 as I have spare parts for them.

PM with swap offer

 

[crane]

shop clean out........

Have these to trade if anyone is interested:
Stihl 036pro.............runs, but LOW compression. Needs piston/rings. Think Cyl is salvageable.
Husky 51 (swedish)...Needs piston/rings. Saw overall is in good shape.
Husky L65................Runs strong and is in excellent shape
070/090 Air filter cover NOS x2(1106-084-0601)

Will post these in "Old North American Mag thread", but if interested
Mac 10-10...............Runs, needs fuel line
Mac D-30.................Runs and is in great shape. Pics posted recently in Mac thread.
Mac 1-41..................Runs and is in great shape. Has all the paint and model decal

Will post pics if anyone is interested.

Looking for:

Large Stihl mount bar(.404) for 070.something in the 36"+ range. Perfer hardnose. can look ugly but needs to be useable.
Piston/cyl for 010 Stihl. Will take 38mm(011) if it will bolt up.
Piston/cyl for Stihl HS85 Hedge trimmer.I know, but maybe someone's got one on the pile
Remington 2.5" or 3.5" roller nose
Mac 99 (two man saw) need manual oiler cable, model plate, drive sprocket in 1/2"
Remington GearDrive perfer 770, but 660/754} Just throwing it out there
Remington GL-7 piston/Cyl, muffler, model tag

 

[sld961]

Have these to trade if anyone is interested:
Stihl 036pro.............runs, but LOW compression. Needs piston/rings. Think Cyl is salvageable.
Husky 51 (swedish)...Needs piston/rings. Saw overall is in good shape.
Husky L65................Runs strong and is in excellent shape
070/090 Air filter cover NOS x2(1106-084-0601)

Will post these in "Old North American Mag thread", but if interested
Mac 10-10...............Runs, needs fuel line
Mac D-30.................Runs and is in great shape. Pics posted recently in Mac thread.
Mac 1-41..................Runs and is in great shape. Has all the paint and model decal

Will post pics if anyone is interested.

Looking for:

Large Stihl mount bar(.404) for 070.something in the 36"+ range. Perfer hardnose. can look ugly but needs to be useable.
Piston/cyl for 010 Stihl. Will take 38mm(011) if it will bolt up.
Piston/cyl for Stihl HS85 Hedge trimmer.I know, but maybe someone's got one on the pile
Remington 2.5" or 3.5" roller nose
Mac 99 (two man saw) need manual oiler cable, model plate, drive sprocket in 1/2"
Remington GearDrive perfer 770, but 660/754} Just throwing it out there
Remington GL-7 piston/Cyl, muffler, model tag

PM sent about 036 Pro

 

[nmurph]

I have a windsor labeled grinder for trade. Works in either direction. Includes the 3 wheels. I am looking for a decent 50cc type saw. Prefer husky 350 types or Stihl 026/034 as I have spare parts for them.

That's an Efco grinder that someone stuck a Windsor label on. I have the identical grinder.

 

[psuiewalsh]

It looks factory. It is labeled effco and Windsor in two spots. See switch pics. My maxx grinder is similar too.
Edit. The other Windsor label is not in the pics . It is under the chain clamp arm area
Sent from my C771 using Tapatalk 2

 

[MechanicMatt]

Neil, My buddy doesn't want to part out his junk 170, he wants me to buy it "cheap" I tried 10 bucks and he walked away.

Other guy needing a 028 muffler, still need it? Im 99 percent sure my other pal will give me it, I gave him a 20 inch bar the other day 058 is no good for me. He owes me one, do you still need the muffler?

 

[sefh3]

I could use some AV mounts for an 041AV. I thought my set were good until I put them on the saw. Too spongy. I need 1110 790 9900 for the rear handle and top mount of the handle. PM me if you have any. I have parts and $$ to trade.

 

[psuiewalsh]

I have 18ft of 25ap to trade. Looking for 036 piston and cylinder or 346 piston and cylinder other stuff.

 

[crane]

Have these to trade if anyone is interested:
Stihl 036pro.............runs, but LOW compression. Needs piston/rings. Think Cyl is salvageable.
Husky 51 (swedish)...Needs piston/rings. Saw overall is in good shape.
Husky L65................Runs strong and is in excellent shape
070/090 Air filter cover NOS x2(1106-084-0601)

Will post these in "Old North American Mag thread", but if interested
Mac 10-10...............Runs, needs fuel line
Mac D-30.................Runs and is in great shape. Pics posted recently in Mac thread.
Mac 1-41..................Runs and is in great shape. Has all the paint and model decal

Will post pics if anyone is interested.

Looking for:

Large Stihl mount bar(.404) for 070.something in the 36"+ range. Perfer hardnose. can look ugly but needs to be useable.
Piston/cyl for 010 Stihl. Will take 38mm(011) if it will bolt up.
Piston/cyl for Stihl HS85 Hedge trimmer.I know, but maybe someone's got one on the pile
Remington 2.5" or 3.5" roller nose
Mac 99 (two man saw) need manual oiler cable, model plate, drive sprocket in 1/2"
Remington GearDrive perfer 770, but 660/754} Just throwing it out there
Remington GL-7 piston/Cyl, muffler, model tag

Sorry for the quote, but can't edit OP.


The 036 has been traded

 

[Venomvpr900]

Clutch cover

Still looking for a clutch cover for my 075av build. It's up and running but need this must have part to put her in wood. Please pm me. Thanks

 

[Mastermind]

I need some stuff..........just stuff.

That's all, as you were.

 

[mdavlee]

Looking for a nice 046 tank. Have some parts, chain, and worthless paper to trade.

 

[Mastermind]

I still need stuff. Anyone?????

 

[axlr8]

anyone have a usuable b/c for a husky 141?? I have some trading stock to offer!!