Swap meet...

[TRI955]

hey guys I need an 026 case, I got quite a bit of stihl stuff to trade.

I need an air filter cover for a Stihl 024. Anyone have one?

I can help both of you....PM me if you still need.


Mike

 

[drill.daddy]

i need a 036 piston and cylinder . please p.m. me if you can trade for one or sell me one . i got plenty of stihl stuff to trade .

 

[chainsawwhisperer]

028 Super rod sleeve/spacer

I'm looking for one of the sleeves that go on the left and right side of the little end of an 028S rod.
None of the 028's that I have use this type of rod.
All the 028 cases & cranks on ebay seem to use forged/cast rod, not a machined rod
Are any of you familiar with this set-up?

Might any of you have one of the sleeves?
I still need to polish the bearing surface, as seen in the pic.
Thanks
Jim

 

[Teddy.Scout]

Alright here's a good one,
066-660 heated handle needed!(would like a full wrap or 3/4) I know 1/2 wrap will do, beggars can't be choosers!

Have a couple complete parts saws to trade for or GREEN!

Thanks!

 

[epicklein22]

Any interest in the Redmax 3800 I have in the trading post? Brand new!!

 

[willysmn]

Dolmar 6800i piston

I need a good piston for the dolmar 6800i and maybe a cylinder if I can find a goood used one.

 

[mheim1]

064 crankcase

In need of a crankcase for a 064.
Thanks.

 

[garyischofield]

6401 kita parts.

ran over this saw with the skidder thing ,p&c,carb,top covers.Case is broken where chain brake attaches.Need it outa here.Also real decent 2050 jonsered 16"/325.MO-Gary

 

[SawGarage]

ran over this saw with the skidder thing ,p&c,carb,top covers.Case is broken where chain brake attaches.Need it outa here.Also real decent 2050 jonsered 16"/325.MO-Gary

Gary,

sent ya a PM

 

[Modifiedmark]

BUMP!!! Mac's gone, need these Homelites gone also.

OK, same deal with these.

Pay for the shipping and there yours.

 

[DSS]

I hate living so far away.:censored:opcorn:opcorn:

 

[sefh3]

Mac 250 Parts

I'm in need of some stater assemblies for 2 Mac 250's. PM me if you have any laying around. I have some stuff to trade for.

 

[dgarrett]

wtb 440 jug and piston

I'm in need of a good piston and jug for an ms440 or 460... I have allot of trading stock or $...dgarrett

 

[Walt41]

I need a puller assembly and chain cover for Echo 650-660, will pay or trade?

 

[mbayer]

In need of 036 bearings will pay cash.

 

[gregz]

I am looking for a dual port cover for a stihl 66
Cheers
Gregz

 

[Teddy.Scout]

I am looking for a dual port cover for a stihl 66
Cheers
Gregz

PM me your address!

 

[StihlGuitar]

Solo 603

I'm toying around with the notion of getting rid of my Solo 603 power head (103cc) if I can find the right trade. I've got 160$ into the piston and carb alone, new OEM Mahle piston and new Walbro WJ-33 (I think 33, or 35...whatever came stock on the saw) carb. I've had some oiler issues, got another one and swapped some parts...shoots too much oil right now, but I'm working it out. It is missing the air filter and filter mount, and has a crappy repair in the top cover which I planned on re-repairing. Its a hell of a saw, with a great power to weight ratio...I've got a new Forester 36" bar with new Stihl .063 3/8 chain I can throw in the mix too...still got part of a roll so if need be, I can throw in multiple new chains.

 

[wigglesworth]

Long shot....Anybody have an OEM DP cover for an 044/046?

 

[StihlGuitar]

Long shot....Anybody have an OEM DP cover for an 044/046?

is that a dual port muffler cover??