Swap meet...

[parrisw]

Muffler, cylinder, piston, crank, bearings, and complete intake system, carb, air filter are the same. The rest is different other than the bar mount. Uses Husky small mount.

Ahh, sorry, don't really want a small mount. Why would they do that?

 

[Bowtie]

Ahh, sorry, don't really want a small mount. Why would they do that?

I dont understand that myself. Im running a large mount bar on mine, but requires spacers and redrilling the oiler hole.

 

[Modifiedmark]

Anyone have a extra Husky decomp laying around?

 

[remduck1]

288xp cylinder

looking for a usable 288 top end with or with out decomp. cash or trade

 

[parrisw]

I dont understand that myself. Im running a large mount bar on mine, but requires spacers and redrilling the oiler hole.

Ya, I'd just not like to have to piss around with it. If it was large mount, I'd be interested, just something else to worry about. It's just nice to be able to bolt one of the many bars on there that I have.

 

[Bowtie]

Ya, I'd just not like to have to piss around with it. If it was large mount, I'd be interested, just something else to worry about. It's just nice to be able to bolt one of the many bars on there that I have.

No worries. Im kind of fond of it other than the bar mount.

 

[parrisw]

No worries. Im kind of fond of it other than the bar mount.

Ya for sure. Thanks anyway though!

 

[o8f150]

new 20" oregon power match plus for 16" bar

this is brand new,,i would like to trade for a new 16" bar,,,this is an oregon # 200RNDD176,,70 drive links,,50 gauge,,3/8th pitch,, i have this for my echo 600p but will fit other models,,i have 4 bars and 2 of them are new,would like to have a 16" bar for it,,this is a trade,,,i have plenty of chains,,,
thanks

 

[o8f150]

this is brand new,,i would like to trade for a new 16" bar,,,this is an oregon # 200RNDD176,,70 drive links,,50 gauge,,3/8th pitch,, i have this for my echo 600p but will fit other models,,i have 4 bars and 2 of them are new,would like to have a 16" bar for it,,this is a trade,,,i have plenty of chains,,,
thanks

thanks to an AS member i have 1 now

 

[Mastermind]

Seeking a jug and slug for a 011. I have some stuff, and a little green paper. Thanks guys.

 

[parrisw]

Seeking a jug and slug for a 011. I have some stuff, and a little green paper. Thanks guys.

I have a piston I think, check my ebay store, to see if its what you need.

 

[Mastermind]

I have a piston I think, check my ebay store, to see if its what you need.

Well, I need a jug before I get a piston, it could be 36 or 38mm. Waiting to see what I find, thanks Will, for the reply.

 

[parrisw]

Well, I need a jug before I get a piston, it could be 36 or 38mm. Waiting to see what I find, thanks Will, for the reply.

Sure, let me know. I can take it off ebay, it'll be cheaper, and we can work something out.

 

[stihlboy]

what i have
1 used mahle 066 cylinder
2 used Stihl 660 cylinders
2 used Stihl 660 intake boots
2 used mahle 064 cylinders (one is ported)
NOS Stihl 038 airfilter cover
NOS Stihl 028 muffler
NOS Stihl 076 clutch carriers
NOS Stihl 031 piston
NOS Stihl 015 piston
NOS Stihl 009 walbro wa99 carb
NOS Stihl 064 chainbrake handle (fits 3/4 wrap)

what i want.... 084 parts or $$$

 

[SawGarage]

Seeking a jug and slug for a 011. I have some stuff, and a little green peepee. Thanks guys.

Randy...

that's GROSS. I thought this was a children's show... oke: :jester:


Oh, got that POS PP back together... the saw has LOW hrs, almost NO wear on the sprocket....


has a GOOD airleak at the throttle shaft

WAY WAY WAY too much time into this to give up... ugh.

J



ALSO... needin some stuff

Jonsered 70E front handle AV mounts
066/660 recoil guts (I have the pulley, but no washer/clip/pawls/bolt... :help:
Larger than puny felling dogs for 371/372
288 muffler

H350 nice CLEAN top cover (I have a couple tanks-old smoked saw...)


Trade: bars/chain/parts galore
Pay: Randy's LGP, or green money.

thanks guys!!

 

[Scooterbum]

Seeking a jug and slug for a 011. I have some stuff, and a little green paper. Thanks guys.

P&C from a 009 work?

 

[Kwdog75]

Anyone have a extra Husky decomp laying around?

I have one, PM your address.

 

[tlandrum]

still needing

372 crank
372 complete muffler assembly including bolts
372 unlimited coil

 

[Mastermind]

P&C from a 009 work?

A 009L is 38mm, a 009 is 36mm. I would really like to go with the 38mm stuff. But....

 

[Mastermind]

Randy...

that's GROSS. I thought this was a children's show... oke: :jester:


Oh, got that POS PP back together... the saw has LOW hrs, almost NO wear on the sprocket....


has a GOOD airleak at the throttle shaft

WAY WAY WAY too much time into this to give up... ugh.

J



ALSO... needin some stuff

Jonsered 70E front handle AV mounts
066/660 recoil guts (I have the pulley, but no washer/clip/pawls/bolt... :help:
Larger than puny felling dogs for 371/372
288 muffler

H350 nice CLEAN top cover (I have a couple tanks-old smoked saw...)


Trade: bars/chain/parts galore
Pay: Randy's LGP, or green money.

thanks guys!!

BTW it's not green anymore, the antibiotics are working.

<a href="http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=11" target="_blank"><img src="http://content.sweetim.com/sim/cpie/emoticons/00020473.gif" border="0" title="Click to get more." ></a>