Swap meet...

[cjcocn]

I just got a Jonsereds M36 (thanks bigbadbob!) that I want to restore. I still haven't looked at it to see what it needs to run.

A Poulan 361 is in the mail also (thanks barneyrb!) and is reputed to have been straight-gassed. I like the looks of it and will likely restore that one as well.

A two-man saw is always a treat and I am waiting for word on one of those. A guy a few hours south of me has to dig it out of his old grainery first. Hopefully that one pans out as I would love to have one of these that has been restored.

The Jonsereds 90 needs new rings.

The Jonsereds 80 needs a bunch of parts.

The second Jonsereds 520SP was supposed to be a parts saw, but I've been thinking that it would make a good project for me since it came in a box.

The second 621 has stripped muffler mount bolts, but otherwise is a good runner. I will get some inserts for it and make it whole again. This is a minor one.

The second 630 needs a chainbrake handle and a gas cap. Another minor fix.

The Poulan Pro 405 needs at least rings. I haven't even looked at this one except to check the compression (75lbs), but the color and age are wrong so it frequently gets bumped to the bottom of the list.

I recently received a Partner R16 with no bar and chain. I will likely clean it up and get it running as well. It has good compression so it will likely only need a carb rebuild.

That should be about it. The rest of the saws are runners.

 

[Sawdustmaker]

Here bowtie.

I need:

recoil/brake handle screw
272xp p/c, carb and flange
036 recoil
nice 036, 026 top and air filter covers
044 piston with 10mm pin used or new (trade for 12mm nice used.) +/- $
i need some stihl bars (24-36")
066 project
044 half wrap

I have

A stihl 044
http://i216.photobucket.com/albums/cc242/sawdustmaker3/IMG_2785.jpg
Stihl 025

044 mufflers, covers, clutches, coils brake handles, flywheels, oilers, control switches, crankcases. pretty much all.
tanks, p/c, and 3/4 wrap handle could could be traded if in dire need.

026 cases, brake handles, coils, random other parts

036 clutch, brake handle, 034 muffler

J-red 625 parts saw.
other stuff to... and a paypal account.

if it is a small part for 026/034/044 then i prolly have it, just ask.

 

[knockbill]

saw projects...

i would like to find a homelite super xl to repair/use,, i like teh older saws for my firewood habit,,,and also a larger old poulan,, i have a 3300 & an s25....
give a yell if you have any getting in your way....
thanks....

 

[Sawdustmaker]

anybody have a picco sprocket for a 025 laying around....?

 

[Saw Dr.]

I just got a Jonsereds M36 (thanks bigbadbob!) that I want to restore. I still haven't looked at it to see what it needs to run.

A Poulan 361 is in the mail also (thanks barneyrb!) and is reputed to have been straight-gassed. I like the looks of it and will likely restore that one as well.

A two-man saw is always a treat and I am waiting for word on one of those. A guy a few hours south of me has to dig it out of his old grainery first. Hopefully that one pans out as I would love to have one of these that has been restored.

The Jonsereds 90 needs new rings.

The Jonsereds 80 needs a bunch of parts.

The second Jonsereds 520SP was supposed to be a parts saw, but I've been thinking that it would make a good project for me since it came in a box.

The second 621 has stripped muffler mount bolts, but otherwise is a good runner. I will get some inserts for it and make it whole again. This is a minor one.

The second 630 needs a chainbrake handle and a gas cap. Another minor fix.

The Poulan Pro 405 needs at least rings. I haven't even looked at this one except to check the compression (75lbs), but the color and age are wrong so it frequently gets bumped to the bottom of the list.

I recently received a Partner R16 with no bar and chain. I will likely clean it up and get it running as well. It has good compression so it will likely only need a carb rebuild.

That should be about it. The rest of the saws are runners.

Wow! That is a long list. You'll probably never get to that J-red 90. I could help ya out.....:monkey:

 

[cjcocn]

Wow! That is a long list. You'll probably never get to that J-red 90. I could help ya out.....:monkey:

Thanks for the offer! It's tempting, but if I send you that saw then I wouldn't have anything to put that NOS piston in. I'm actually trying to find just rings (separate) so that I don't have to split the rings and piston.

PS .... I'll start threads when I get far enough into the restorations. With the skill level that is on AS I am hoping for some good suggestions for improvements.

 

[Saw Dr.]

Thanks for the offer! It's tempting, but if I send you that saw then I wouldn't have anything to put that NOS piston in. I'm actually trying to find just rings (separate) so that I don't have to split the rings and piston.

PS .... I'll start threads when I get far enough into the restorations. With the skill level that is on AS I am hoping for some good suggestions for improvements.

Sent ya a PM on the rings

 

[epicklein22]

anybody have a picco sprocket for a 025 laying around....?

I should, let me check on monday for sure. What you want to trade for it?

 

[Saw Dr.]

Anybody have a spare MS 290 or 029 Super cylinder around? Scored is fine, just no grooves. I have another grooved one here. Also need an 029/early 290 airbox lid. Flat-top style. Faded is OK, as the rest of it is faded.

 

[cjcocn]

Anybody have a spare MS 290 or 029 Super cylinder around? Scored is fine, just no grooves. I have another grooved one here. Also need an 029/early 290 airbox lid. Flat-top style. Faded is OK, as the rest of it is faded.

I have one. I will check to see if it is scored or grooved.



EDITED TO ADD: The cylinder looks like it might be usable. There are 3 instances of scoring above the exhaust port. I cannot fit my fingers in the cylinder well enough to see if they will catch a nail, but I can say that I cannot feel them with the skin of my finger.

Let me know.

 

[Bowtie]

044/046 modded muffler cover

Here is one of Wojo's covers I ended up a while back. I have permission from the mods to post this. Would sell or trade for whatever.

 

[Motodeficient]

Crap wish that was one of his 361 mufflers...

Anyone have a modded 361 muffler they want to sell?

 

[clintb]

I have 13 stihl saws, 044 to 066BB
440
044BB
046
046BB
064
064 with 066BB kit
066
066BB
I need a chevrolet 5.3,5.7 or 6.0 engine or parts.

 

[yo2001]

I have 13 stihl saws, 044 to 066BB
440
044BB
046
046BB
064
064 with 066BB kit
066
066BB
I need a chevrolet 5.3,5.7 or 6.0 engine or parts.

Are you looking for LSx or just a SBC?

 

[clintb]

Like ls1 in corvette, camaro or like in pickups, 5.3, 6.0.

 

[Saw Dr.]

Here is one of Wojo's covers I ended up a while back. I have permission from the mods to post this. Would sell or trade for whatever.

I got some pre-stripped bolts and a box of scored 290 pistons. Sound fair?

Oh, I see, it is POLISHED. OK, I'll throw in some cracked fuel lines, and a used exhaust gasket....

Last I checked, he was buying them back!

 

[Bowtie]

I got some pre-stripped bolts and a box of scored 290 pistons. Sound fair?

Oh, I see, it is POLISHED. OK, I'll throw in some cracked fuel lines, and a used exhaust gasket....

Last I checked, he was buying them back!

ROFL! Tell me how ya really feel.

 

[epicklein22]

Here is a list of a parts lot I bought recently. Most trimmer stuff, but some husky stuff and other miscellaneous:

Partner Air filter part no: 0231196

Attilina trimmer head

Echo Maxi-cut head pn: 215511

Echo fixed line head x2 pn: 21560056

Echo loop handle

Stihl auto cut 2 entire head assembly x3 pn: 40027102154

Stihl auto cut 2 replacement spool with line x2 pn: 40027104382

Stihl loop handle pn: 41307901316

Stihl fixed line head pn: 40017132100

Robin Fuel line assembly pn: ec02-0098

Black and Decker spool w/ line pn: 575462-01

Craftsman Spool w/ line pn: 85820

Kaw/Ryobi/Homelite fuel line

Shindaiwa fuel line, fits a t25/c25/c35 pn: 20000-85303

Shindaiwa fuel line + filter, fits a t25/t27/c35/b45 pn: 20011-85401

Husky handle bar fits a 266 and maybe more?

Husky handle bar fits a 372/371/365/362

Husky air filter, says 371 on the bag, assume it fits others in this saw family pn: 503818001

Husky air filter, 61/66/266/281/288 pn: 501807101

Husky anti-vibe, fits a 61/266 and maybe more? pn: 501773401

Husky chain adjuster, fits a 40/50/51, maybe more?

Stihl 012 parts saw, anybody want it before I ebay it?

Looking for crappy stihl cylinders and saws!!!!!!

 

[Sawdustmaker]

I need:

nice 026 top and air filter cover
026 control lever
046 top end.




I have


044 mufflers, covers, clutches, coils brake handles, flywheels, oilers, control switches, crankcases. pretty much all.
tanks, p/c, and 3/4 wrap handle could could be traded if in dire need.

026 cases, brake handles, coils, random other parts

very clean 024 carcass

036 clutch, brake handle, 034 muffler

J-red 625 parts saw.
other stuff to... and a paypal account.

if it is a small part for 026/034/044 then i prolly have it, just ask.

 

[Sawdustmaker]

this is some of what i have.

066, 044, 046, 075 some of it is cracked

the helmet is in there to, the suspension is broke, the clutch cover is trade materal only as is the 3/4 044 handle, not in pic. loop handle is off 026

questions just ask. the mufflers are 034, 044