Swap meet...

[Bowtie]

SDM, I want that 034/036 oil worm gear, and I need a muffler for an 066/660.

 

[yo2001]

Sawdustmaker, I could use the 034 front muffler cover.

How about a brand new loop of 18" RSC in 3/8"for a trade? I got few other things but nothing that you are loking for. Let me know.

 

[Modifiedmark]

Anyone want this Mac 2-10 before I ebay it? I'ts been sitting for a while, got lots of compression and I got it to spark a couple times, but it's got a broken starter pawl, so I didn't crank it much.

PM, me your ideas..

Well the 2-10 is now on its way with a famous McCulloch collector to Iowa!

It will have a good home there for sure.

 

[Madsaw]

I have a 028 woodboss that needs bearings and seals Jug and piston are pristine. I also have a ton of nos 028 parts( fuel lines, a drum bearing, at least 6 bar plates, about 9 manifolds, about 9 of the start/stop/choke levers, a xtra oiler, several oiler gaskets, a couple of mufflers, several muffler gaskets, several bar tension assys, and more). Parts alone are worth 200+$ at my discount.

I want this to go as one lot.

I am currently un-employed so money is tight!

I would like to trade for a fair shape big 'ol geardrive or direct drive Mac or Homelite. Shoot, any old reed valve muscle would work. Just need something vintage to restore on my spare time so I dont go crazy!



Kris

PM Sent
Bob

 

[heimannm]

Well the 2-10 is now on its way with a famous McCulloch collector to Iowa!

It will have a good home there for sure.

And he is delighted to have it, I can assure you.

Mark

 

[epicklein22]

More stuff. All parts equipment

FS80 trimmer parts

FS36 trimmer

FS55 trimmer

BG55/65/85 parts

Echo backpack blower x2

Stihl BR420 x2

Husky 36

Tanaka backpack blower

Husky 123 trimmer parts

 

[Trigger-Time]

Anyone need a new in the box Stihl OEM FS 360 Piston and Cylinder kit?

 

[brokenbudget]

poulan 3400/3700 or the crapsman equivalent

looking for a good running (good bottom end, fried top is sorta o.k.) or close to good running poulan 3400/3700. bearings in the bottom MUST be good.
will take the craftsman saws as well:greenchainsaw:

on another note, i still have the 28'' stihl bar/chain: 3003 000 8838

skil 1645 (no b/c) runs well, needs fuel lines.

stihl ms180 (practicly new, 1 year old) don't really like it. has the easy start, 14'' b/c. runs perfect, i just don't like it. i'll trade this for an equal sized saw straight if it's interesting (and new) enough.

mcculloh 1635 http://www.mccullochpower.com/node3829.aspx?nid=97797 brand new, half a tank through it. modders dream
it's a split bottom case with a seperate cylinder PLUS windowed ports (ooooohh!). all the good stuff perfect for the bumble bee class.

 

[Bowtie]

looking for a good running (good bottom end, fried top is sorta o.k.) or close to good running poulan 3400/3700. bearings in the bottom MUST be good.
will take the craftsman saws as well:greenchainsaw:

on another note, i still have the 28'' stihl bar/chain: 3003 000 8838

skil 1645 (no b/c) runs well, needs fuel lines.

stihl ms180 (practicly new, 1 year old) don't really like it. has the easy start, 14'' b/c. runs perfect, i just don't like it. i'll trade this for an equal sized saw straight if it's interesting (and new) enough.

mcculloh 1635 http://www.mccullochpower.com/node3829.aspx?nid=97797 brand new, half a tank through it. modders dream
it's a split bottom case with a seperate cylinder PLUS windowed ports (ooooohh!). all the good stuff perfect for the bumble bee class.

I have a Poulan case/crank and some extras from a Poulan Forester. Is that what you need? Im interested in your 28" bar/chain.

 

[brokenbudget]

I have a Poulan case/crank and some extras from a Poulan Forester. Is that what you need? Im interested in your 28" bar/chain.

looking for a complete saw (minus b/c of course) to throw a brand new 3700topend on. don't care if the sals are done, so long as the bearings are good. don't even care if it's a chainbrake model or not.even the color doesn't matter.:greenchainsaw:

sawdustmaker tried to find something to trade for the bar but just didn't have anything i needed at the time...

 

[Sawdustmaker]

sawdustmaker tried to find something to trade for the bar but just didn't have anything i needed at the time...

sure... ill send you a case... haha

 

[Trigger-Time]

I would like to trade a set of later 066/660 felling spikes for a smaller set
like that was on 064's

Bigger spikes is what I have to trade, for a set like the smaller spikes in pic

 

[Sawdustmaker]

does anybody want a countervibe 3400?

 

[MS460WOODCHUCK]

does anybody want a countervibe 3400?

How much? And does it run?

 

[Sawdustmaker]

I do not know. i have not messed with it yet. I am going to pull the muffler right now.... just a sec

 

[Sawdustmaker]

The piston looks pretty good

 

[MS460WOODCHUCK]

Are you just aloud to trade on here? No buying? I don't want to get into trouble.:monkey:

 

[Sawdustmaker]

here is the beast

 

[MS460WOODCHUCK]

here is the beast

Needing anything in trade?:monkey:

 

[MS460WOODCHUCK]

Needing anything in trade?:monkey:

Dumb question huh!