Swap meet...

[MS460WOODCHUCK]

I have a 28'' Stihl ES bar for 460-660 with a woodland pro skip chain. They have 2-3 tanks of fuel on them. The bar looks basically new and chain is just as new. I bought it for the 660 and end up running the 32'' mostly so why have it laying around. Looking to trade for?:monkey:

 

[barneyrb]

Got a running Homelite XL 12 (old blue mag saw with 16-18" bar). It seems ok as I haven't checked compression but it starts easy. It will make your ears bleed as it has only a straight pipe on it. What is anyone offering??????

 

[MS460WOODCHUCK]

All right guy's this is you're lucky day! I have a new ...................###.....................MS361!!!:jawdrop: (7tanks of Stihl ultra) STIHL under warranty!!! Saw is maybe 2 months old!!! Saw has 20'' bar and chain. I just don't use it, it is too close between the MS270 and the ms460. I have flooded it a couple of times being new it happens. My 210 and 660 flooded easily til they got broke in nothing too worry about absolutely nothing wrong with it, it is new and runs awesome just never use it! What ya got?

 

[Motodeficient]

Looking for an ignition coil to fit husky 268/272. Have a near brand new oregon 14" bar and chain for homelite to trade. Also have Husky 61 aftermarket cylinder cover, Pioneer P20 chainsaw, not pretty but it starts and runs.

Can also send paypal if anyone has a good price on one

 

[epicklein22]

Here is a nice 32" McCulloch bar with a like new stihl safety chain.

<img src="http://img32.imageshack.us/img32/4453/048r.jpg">
<img src="http://img30.imageshack.us/img30/324/049fbg.jpg">
<img src="http://img29.imageshack.us/img29/1958/050i.jpg">
<img src="http://img132.imageshack.us/img132/7843/051a.jpg">

 

[PB]

Hey Epic, do you know what the mount is on that bar? (What saws?)

 

[Harzack223]

stihl 025 parts

I some parts to a stihl 025, most are there except engine and air filter cover, tank vent, rings.

McCulloch timberbear two 610s and an old super 44a. Haven't touched the timberbear or the 610s since I got them. The super 44a runs starts up fine, has a leaky gasket for the oil tank.


I am mostly looking for bars and chains, mostly in 3/8 by .50 between 16-25. 1/4 chain for an 020av 14inch and a couple .325 .63 16inch chains for my 026.

Possibly looking for other things let me know what you have to offer.

 

[epicklein22]

Hey Epic, do you know what the mount is on that bar? (What saws?)

I wish I did. I will have to do some investigating on Acres internet to see what mount.

 

[Madsaw]

Hey Epic, do you know what the mount is on that bar? (What saws?)

I got a bar on my 385 just like that. I beleive its just a tad loose on it. When I seen them listed they was for the bigger Jreds. I want to say a 9 mm slot compared to the huskys taking a 8.5

Bob

 

[joatmon]

Here is a nice 32" McCulloch bar with a like new stihl safety chain.

<img src="http://img32.imageshack.us/img32/4453/048r.jpg">
<img src="http://img30.imageshack.us/img30/324/049fbg.jpg">
<img src="http://img29.imageshack.us/img29/1958/050i.jpg">
<img src="http://img132.imageshack.us/img132/7843/051a.jpg">

Andrew,

Bet that bar/chain in that position would be more effective than a dead bolt lock in keepin' riff raff away.

ole joat

 

[Meadow Beaver]

I got a bar on my 385 just like that. I beleive its just a tad loose on it. When I seen them listed they was for the bigger Jreds. I want to say a 9 mm slot compared to the huskys taking a 8.5

Bob

Well if it was loose and a husky has a 9mm mount, then it's a 9.5mm mount.

 

[Modifiedmark]

Well if it was loose and a husky has a 9mm mount, then it's a 9.5mm mount.

Yes, your right and I was thinking that it looked like a D196 Homelite mount anyway which would be a 9.5mm 3/8's slot.

Which McCulloch used a Homelite style mount though?

 

[Madsaw]

Well if it was loose and a husky has a 9mm mount, then it's a 9.5mm mount.

Yeap your right. I was not sure what the size was for sure just knew it was just a tad different.
Bob

 

[squish9173]

i have a 266se for parts,& a 2100cd possibly runs or for parts.what do you have.i like 346xp,371xp,51s.

 

[PB]

I was curious if it would fit the older JReds. I think some of the Homie mounts will work, but others won't. I need to do some research.

 

[Meadow Beaver]

A 9.5mm mount would probly fit a few models.

 

[PB]

A 9.5mm mount would probly fit a few models.

The older JRed take a 10mm mount, but the oiler holes is the problem. Some bars are listed for Homie, Pioneer and JReds but oiler holes don't work on some combinations.

 

[Meadow Beaver]

There's a possibility that it could fit the old jreds like the 111s.

 

[epicklein22]

The bar mount width is 9mm. The chain adjuster slots are 9mm also and the oiler hole is in front of the chain adjuster slots.

 

[Sawdustmaker]

guys i'm selling out.


need some cash and won't need saws for a couple months.
i am going to be working at dollywood for the summer.

would be interested in p/cs that i can rebuild saws with this fall

i have

poulan 3400 countervibe
jred 625 parts
j-red 2165 turned 2171 that should be running soon (did you get the # jredfan?)
ugly 036 runner
026 w/ new OEM piston, runner
026 w/ new OEM p/c, runner
044 w/ 460BB
044
025 runner

and most of the parts from my last posts.

I will be getting pics and putting this in the TP soon

PMs welcome