Swap meet...

[epicklein22]

Anybody have a good rear handle, air filter and filter cover for a MS290?...

Also, still looking for a good MS210 crankshaft and rod...

Have some older stuff for trade...Craftman/Roper, Lombard?(maybe), Remington, and Echo 452vl parts and bars...

I should have a ms210 carcass.

I'm looking for a few saws for a guy at work, ready to go or repair. He wants an 066/660 and a 020t.

Anybody want an 925xl homelite. Starts, but I can't keep it running. Has a new carb kit. Doubt it needs much to get going.

 

[Saw Dr.]

I should have a ms210 carcass.

I'm looking for a few saws for a guy at work, ready to go or repair. He wants an 066/660 and a 020t.

Anybody want an 925xl homelite. Starts, but I can't keep it running. Has a new carb kit. Doubt it needs much to get going.

PM sent on the 925

 

[valekbrothers]

I should have a ms210 carcass.

I'm looking for a few saws for a guy at work, ready to go or repair. He wants an 066/660 and a 020t.

Anybody want an 925xl homelite. Starts, but I can't keep it running. Has a new carb kit. Doubt it needs much to get going.

I have an 019t in pretty good shape if you don't get a bite on the 020t.

PM me if you are interested.

 

[epicklein22]

I have an 019t in pretty good shape if you don't get a bite on the 020t.

PM me if you are interested.

Thanks for the offer. We have one at the shop and the climbers hate the thing. Nobody likes to use the fat girl in public.:greenchainsaw:

 

[blsnelling]

Where you been hidin' Andy? Long time no hear

 

[epicklein22]

Where you been hidin' Andy? Long time no hear

Busy man, Been using and fixing saws instead of talking about them.

 

[BlackCatBone]

I'm looking for a strong milling saw, or one that has potential for that task but needs work.

076, 088, 394/395xp, 3120xp, etc.

I reply to all PMs, thanks.

 

[sefh3]

trying to make room in the garage.

I have a Homelite 240 16'' bar, Poulan 14'' Wood Shark, McCullock Eager Beaver 16", Power Mac 6 14" Bar.

Looking for any medium to large Stihl Saws.

 

[blsnelling]

Busy man, Been using and fixing saws instead of talking about them.

I know what you mean. If I didn't set at a PC all day, I wouldn't be on here near as much either.

 

[Guarddog1]

Thanks for the offer. We have one at the shop and the climbers hate the thing. Nobody likes to use the fat girl in public.:greenchainsaw:

:agree2: about the fat girl that is to funny

 

[Guarddog1]

I have a 029 oe muffler ported very neatly with gasket and bolts can send pics also I have a 029 oe clutch used in very good shape I can send pics as well. I am looking for a 394/395 carb used for some experimentation also a carb pan in very good shape.

 

[blsnelling]

Anyone got a good 028 Super cylinder laying around? I'll need a piston too if you've got one.

I have an 028 super in fairly decent shape and complete (minus bar cover), but it doesn't run. The previous owner put a aftermarket chinese piston in an OEM cylinder and appears through the exhaust port that the ring is broke. I haven't even took off the cylinder so I'm not sure if it is salvageable or not. I'd trade it or sell it outright for $80 including shipping.

Update: I'm going to inspect the cylinder tonight and if it is good Brad wants it. If it isn't, and its still up for grabs, I'll let you know.

I'm going to be able to let someone else have bcorradis 028 Super. Mine came apart easily and actually cleaned up pretty well. A new Meteor piston and I'll be on my way. Oh, it's got to have a new clutch side crank bearing. Had rust in it

 

[Bowtie]

I'm going to be able to let someone else have bcorradis 028 Super. Mine came apart easily and actually cleaned up pretty well. A new Meteor piston and I'll be on my way. Oh, it's got to have a new clutch side crank bearing. Had rust in it

I'll take Bcorradi up on that baby if he still has it.

 

[blsnelling]

I'll take Bcorradi up on that baby if he still has it.

I'm glad someone else can use it. Hopefully the cylinder turns out to be good.

 

[bcorradi]

The 028 Super is spoken for. Its headed off to KS to Jason aka BowTie.

 

[fredmc]

I should have a ms210 carcass.

I'm looking for a few saws for a guy at work, ready to go or repair. He wants an 066/660 and a 020t.

Anybody want an 925xl homelite. Starts, but I can't keep it running. Has a new carb kit. Doubt it needs much to get going.

I have two complete 020's in a box I would like to get rid of. I need a 66, 268, 272 top end. Need any 395 parts? I have top covers and clutch/cover/chain brakes, carb, intake, cylinders (one good-one with alum transfer) I have a 50 parts saw, 61 rancher part saw, j-red 2065 part saw and two Dolmar 111 part saws.

 

[epicklein22]

I have two complete 020's in a box I would like to get rid of. I need a 66, 268, 272 top end. Need any 395 parts? I have top covers and clutch/cover/chain brakes, carb, intake, cylinders (one good-one with alum transfer) I have a 50 parts saw, 61 rancher part saw, j-red 2065 part saw and two Dolmar 111 part saws.

Old style 020's? or the one's that look like a 200t?

I'm interested in the 2065 if no one else snatched it up.....

 

[fredmc]

Old style 020's? or the one's that look like a 200t?

I'm interested in the 2065 if no one else snatched it up.....

They are both old 020's with points. I still have the 2065 It needs a carb and a piston, the cyl could be cleaned up. Everything is there except for the carb. Are you looking for any homeowner stihl parts? A local guy has a 488 shinny for $180 btw.

 

[epicklein22]

They are both old 020's with points. I still have the 2065 It needs a carb and a piston, the cyl could be cleaned up. Everything is there except for the carb. Are you looking for any homeowner stihl parts? A local guy has a 488 shinny for $180 btw.

PM ya.

 

[blsnelling]

The 028 Super is spoken for. Its headed off to KS to Jason aka BowTie.

Good deal. You found a new home for it.