Swap meet...

[FireMan2285]

That part number doesn't match anything I have found in my IPL's. Got a few more to look through later. My 'callibrated eyeball" says that dog is from an XL700/800/900 series Homelite (such as an XL800 or XL925).

thats what i'm thinking too the saw that it came off of was blue with a black air filter top.

 

[epicklein22]

I am looking for a new piston and rings for an 036/MS360 saw. I have a new Meteor piston for an 066/660 and an old 066 cylinder (before the decomp was added) I would trade.

[email protected]

Jason, I have a new meteor kit for a 036. I'm interested in the 066 cylinder.

 

[Bowtie]

Jason, I have a new meteor kit for a 036. I'm interested in the 066 cylinder.

PM sent.

 

[moparman]

Thanks Where do I get them?Pioneerguy gave me some part#s 430910

I just looked and Jacks Small Engines has them listed for $5.43 each - use part # 507-430910. No guarantee that they have them - you might have to wait for a few weeks.

 

[moparman]

Fuel/oil tank for IEL Beaver and IEL AB

Looking for fuel/oil tank for IEL Beaver, plus one for IEL AB. Round tanks with a cap near each end. The tanks almost identical, so I would be happy with either. Needed for their coming out party. I have some old Poulan sandcast saw trading stock, some Pioneer trading stock, or green.

 

[kev1n]

Poulan 3400

I'm looking for some Poulan 3400 parts.
A flywheel and starter pulley.
Thanks Kevin

 

[1375619cm3]

Looking for 1 or 2 (3/8) sprockets to fit Mcculloch 1-51 and a 250. please pm me if you have any you can part with or sell.

 

[tbone75]

I just looked and Jacks Small Engines has them listed for $5.43 each - use part # 507-430910. No guarantee that they have them - you might have to wait for a few weeks.

Thankyou I have dealt with Jacks before.

 

[tbone75]

Trade

I have a Husky 136 & a 142 that both run good 16"B&C I would trade for bigger project saws. Also a Poulan 295 farmhand 20"B&C that runs good. edit also a new poulan 3314 used 3314 wildthing 4018 maby more?All runners.

 

[Eccentric]

thats what i'm thinking too the saw that it came off of was blue with a black air filter top.

What happened to the rest of the saw?

 

[67L36Driver]

Tilly carb B246 needed for Homie XL-12.

Or a Walbro SDC.

I broke the 90* fuel inlet trying to make it fit tighter.

I have a near mint cylinder, piston, rings and rod w/bearings for an XL-101 to trade. Or small cheap homeowner Poulan parts.

Not wanting to part with miniature presidential portrates.......................................................................yet.

 

[roncoinc]

Ron I might have one..I will look in the attic tonight.

Tnx Cliff,let me know either way.

 

[firefighter33]

I have a Husky 136 & a 142 that both run good 16"B&C I would trade for bigger project saws. Also a Poulan 295 farmhand 20"B&C that runs good. edit also a new poulan 3314 used 3314 wildthing 4018 maby more?All runners.

What are u looking for John? Anything in particular?

 

[FireMan2285]

What happened to the rest of the saw?

i don't know this is the only thing i can find right now.but i'll keep looking and maybr i'll find some more of it.

 

[Mastermind]

Or a Walbro SDC.

I broke the 90* fuel inlet trying to make it fit tighter.

I have a near mint cylinder, piston, rings and rod w/bearings for an XL-101 to trade. Or small cheap homeowner Poulan parts.

Not wanting to part with miniature presidential portrates.......................................................................yet.

I don't have a SDC but I'm sure I have a Zama that fits that saw. Let me know if you want it.

 

[tbone75]

What are u looking for John? Anything in particular?

Any 50cc and up project saws.Not real old.Need to be able to get parts for it LOL

 

[Arrowhead]

Or a Walbro SDC.

I broke the 90* fuel inlet trying to make it fit tighter.

I have a near mint cylinder, piston, rings and rod w/bearings for an XL-101 to trade. Or small cheap homeowner Poulan parts.

Not wanting to part with miniature presidential portrates.......................................................................yet.

I have an SDC 38A I think is off a Homie. Unknown condition... free to good home.

 

[Chris J.]

SOL? I never said that, lol... I gotta dig out the box ...

Jay, I wasn't directing the Jonsered 920/820 SOL comments specifically to you :msp_ohmy:, just generally speaking . If you, or anyone, come with parts or a parts saw I'm still interested.

I'm hoping to close a deal on a 2095, just waiting for some info re the condition of the cylinder. If that transpires, I might put the 920 parts/parts saw I have up for trade.


Someone mentioned some Poulan parts (360??). I have a Wright 136 / Poulan 361 that I'll probably never get to, photos in this thread:

http://www.arboristsite.com/chainsaw/163160.htm

 

[ptjeep]

Still needing one.

bump

 

[gloud]

I'm looking for some Poulan 3400 parts.
A flywheel and starter pulley.
Thanks Kevin

I have a Skil 1641 that is supposed to be the same in excellent condition. I have not messed with it yet, So not 100% it runs.

I need a piston and gasket set for a 272 husqvarna. and a starter for a 162 se Husq.