Swap meet...

[little possum]

Good news is, I think most of those dawgs are interchangeable!

 

[Axlerod74]

372xp for sale

Posted in the classifieds.
PM if intrested.

 

[PogoInTheWoods]

WT-220? Never seen one of those. Lemme do some digging. If it will work, Im interested. Just needs to work for a muffler modded 026 Pro.

Looks to me like a WT22C and should work just fine. Both my 026's have WT22's.

I'll take it if you don't want it.

Poge

 

[aquan8tor]

Looking for an 084 chain brake handle. Cracked mine, and broke it off after repeated on/off cycles. Can't find one on ebay...

 

[Opihi59]

Roper 917.353550

I'm trolling for a bar, 180PXBD082 Every option I tried came up naught. If you have one in reasonable shape, please give me a shout.


For the Aussie crowd: "Shout? Mate, that sheepshagger wouldn't shout if you stuck a knife in him!"

 

[tomdcoker]

poulan 3400 air filter

I need one of the above. I have some parts and paypal. Thanks Tom PS That should have been an airfilter cover.

 

[Bowtie]

Looks to me like a WT22C and should work just fine. Both my 026's have WT22's.

I'll take it if you don't want it.

Poge

I think I need glasses. Looks like you are right, and thank you! I sent a pm, and if I dont end up with it go for it, or go for it anyway, thats capitalism, lol!

 

[psuiewalsh]

new small bucking spikes for makita 6401 looking for hd 064 air filter setup.

I have a set of new small bucking spikes for makita 6401. I ordered them in the early summer and have since sold the saw. I am looking for a hd 064 air filter setup. Willing to pay some cash.

 

[Eccentric]

I'm trolling for a bar, 180PXBD082 Every option I tried came up naught. If you have one in reasonable shape, please give me a shout.


For the Aussie crowd: "Shout? Mate, that sheepshagger wouldn't shout if you stuck a knife in him!"

If that's one of the 3.7ci Ropers sold by Sears, then a D176 mount Echo/Poulan/McCulloch bar should work fine for you. They're still in production.

 

[Opihi59]

If that's one of the 3.7ci Ropers sold by Sears, then a D176 mount Echo/Poulan/McCulloch bar should work fine for you. They're still in production.

Yep, it is the Roper, an early Roper with the D082 mount, not the later models with the D176 mount.. On the D176 bars, the oil hole is into the channel and on the D082, it is thru the bar. Yes, I can drill thru the bar, but the D176 bar takes a 72 link chain, and I just bought two new 74 link chains for the D082 bar.

Why would I do that? Well I bought the bar at the same time from a different source who a week later told me duh, we don't have/can't get it. Stuck since I can't return the chains. I may end up going the D176 route, but dang it all, I'd really like to get the right bar...........

Thanks.

 

[Chris J.]

I'm looking for a set of Dawgs for a McCulloch 250. Thanks for your help in this and all matters.

Randy, I've got a few misc 250 parts, I'll need to check to see if I have the dogs. Something tells me I previously looked, but didn't have them.
.

 

[Mastermind]

Randy, I've got a few misc 250 parts, I'll need to check to see if I have the dogs. Something tells me I previously looked, but didn't have them.
.

Thanks a bunch Chris.

Like LP said I do believe that many of these are the same mounting pattern.

I find myself in need of a nice looking 028 handle bar as well. I have many parts to trade and a few nasty dollars.

 

[Mr. Bow Saw]

I'm looking for a set of Dawgs for a McCulloch 250. Thanks for your help in this and all matters.

I have one.


Anyone need any parts off of a C-51 Homelite.

 

[chainsawwhisperer]

Hey all,
I am looking for an Homelite XL12 clutch/chain cover (5/16" bar studs), and the short, cast bracket that holds the upper portion of the handle to the saw. I thought i could use a bracket from an SXL, but the angle is different.
LMK
Jim
Just remembered I also need one of the long muffler bolts for a late model Homelite SXL.

 

[Mastermind]

I have one.


Anyone need any parts off of a C-51 Homelite.

PM sent.

 

[tbone75]

This is a long shot.But I need both sides and screws to put it on for a Efco 134 top handle saw.I have a brand new saw missing both sides.

 

[Mastermind]

I find myself in need of a nice looking 028 handle bar. I have many parts to trade and a few nasty dollars.

Bumpity bump...

 

[timberdollars]

Efco

This is a long shot.But I need both sides and screws to put it on for a Efco 134 top handle saw.I have a brand new saw missing both sides.

I know your still looking for these but it will be easier to find the Oly versions I think, but it'll be a frankensaw then but functional. Just thought I'd put it out there to help you source some Efco, Olympik (Olympyk), Oleo Mac top handle stuff. Theres one other brand out there thats the same model too? the Redmax looks to be the same but thinking its not? Pretty easy if its Top handle and made in Italy it may fit.

Good Luck hope you get it together they are out there.

Duane

 

[tbone75]

I know your still looking for these but it will be easier to find the Oly versions I think, but it'll be a frankensaw then but functional. Just thought I'd put it out there to help you source some Efco, Olympik (Olympyk), Oleo Mac top handle stuff. Theres one other brand out there thats the same model too? the Redmax looks to be the same but thinking its not? Pretty easy if its Top handle and made in Italy it may fit.

Good Luck hope you get it together they are out there.

Duane

Thanks for the info!I don't care what it looks like LOL Think I will just use it.Seems very well built.It feels like my Echo 280E and I use that all the time.

 

[sefh3]

I'm looking for a wrap handle, chain brake, clutch cover and all the chain brake accessories for a Stihl 046. I have parts to trade.