Swap meet...

[Mastermind]

I wonder if anything will fit a 340 Homie?I need some parts for one of them I am fixing for a guy.It has no spark and its a different set up on the coil than anything I have seen?

They are different animals.....

 

[DSS]

Lookin for a piece of cheese to fit a 4 1/2 x 5 1/2 inch turkey sammitch.

Parts or cash. TIA.:msp_unsure:

 

[Modifiedmark]

i have a homelite 240 parts saw,, there is a lot of parts left on it,, i got this saw from muddawg for parts to fix another 240 that i am donating to a guy that needs it,,, most all the parts are there and it does run,, i can put pics up if needed,,,either pay for the actual shipping fo the power head or i can use 2-3 14" poulan/echo b/c's,,,they don't have to be new either,,,i also need a 32" 105 dl 58 guage chain,,, can be a good used one too

Would you settle for a brand new 28" .058 93dl?

 

[tbone75]

They are different animals.....

Thanks Randy I was afraid of that LOL

 

[Scooterbum]

i can use 2-3 14" poulan/echo b/c's

I have a pile of the boxstore type poulan bars and chains here if that's the type your talking about.

 

[Tree Wacker]

Lookin for a piece of cheese to fit a 4 1/2 x 5 1/2 inch turkey sammitch.

Parts or cash. TIA.:msp_unsure:

i think you are out of luck on that.

 

[Warped5]

i think you are out of luck on that.

Must be some knda Canadian humor eh? :monkey:

 

[Tree Wacker]

well i would send him a piece of cheese for his sammich but it would spoil before it got there.

 

[cheeves]

Poulan 3600 P/C

Looking for a Poulan 3600 P/C. Anyone know where I can find 'em?

 

[o8f150]

I have a pile of the boxstore type poulan bars and chains here if that's the type your talking about.

that be the ones

 

[o8f150]

Would you settle for a brand new 28" .058 93dl?

if i had extra drivers it would be ok,, but all i have is some extra 50 gauge drivers,,, but thanks

 

[Chris J.]

As usual I'm looking for:
Jonsered parts, pretty much anything that'll work on a 2095.
Fuel system parts, including carb kits, for Poulan 3700, 5400, & SD25.
Good p&c from an Echo CS-520 opcorn:, also the brake band.
I supposed durable fibre paper with fancy engraving print would be acceptable under the right circumstances .
Trading for some future porting on the Jonsered 2095 is a possibility.

I'm looking to clear out a couple of project saws that I'll never got around to working on. If you need photos there might be some floating around AS, or I can email them, or upload them to Photobucket. Ask questions, & I'll check if I don't know the answer (before you even ask, the meaning of life is 42, & the secret to happiness I have no idea). Up for trade:

Poulan 361 rebadged as a Wright 136....Homelite C-72, someone previously contacted me ???, I need to check my PMs....Lancaster 6-45 (I think)....Poulan 3400....Stihl 011/009--Variety of misc. parts....Jonsered 920 carcass....Disston DA-211 very incomplete, some NOS parts....Titan 40 nearly complete....Misc sprockets & chainsaw parts.

I now have many photos of the Wright 136 (Poulan 361) in Photobucket.

Wright 136 Poulan 361 pictures by antoniosalieri - Photobucket

 

[Modifiedmark]

if i had extra drivers it would be ok,, but all i have is some extra 50 gauge drivers,,, but thanks

Sorry Scott I missread, I thought you were looking for a bar.

 

[redray46]

Homie 240

i have a homelite 240 parts saw,, there is a lot of parts left on it,, i got this saw from muddawg for parts to fix another 240 that i am donating to a guy that needs it,,, most all the parts are there and it does run,, i can put pics up if needed,,,either pay for the actual shipping fo the power head or i can use 2-3 14" poulan/echo b/c's,,,they don't have to be new either,,,i also need a 32" 105 dl 58 guage chain,,, can be a good used one too

If the other deals fall through,let me know.I may have that 32" chain you are looking for.Is the clutch cover on that 240??
Ray

 

[o8f150]

Sorry Scott I missread, I thought you were looking for a bar.

not a problem,,, but with the problem i am having finding the chain i might have to go with a 28,, so far i have to have it made to get that length,,,,

 

[o8f150]

If the other deals fall through,let me know.I may have that 32" chain you are looking for.Is the clutch cover on that 240??
Ray

everythign is there but the air filter cover and b/c,,, the oiler diaphram is bad on it,,, the bottom of the saw housing is cracked,, the engine is a good runner

 

[Bowtie]

038 coil

Needing a coil for an 038.

I have one if you still need it.

 

[Eccentric]

Lookin for a piece of cheese to fit a 4 1/2 x 5 1/2 inch turkey sammitch.

Parts or cash. TIA.:msp_unsure:

Pay shipping and I'll send one out to you Chris!:jester:

 

[DSS]

Pay shipping and I'll send one out to you Chris!:jester:

Too late.

 

[tbone75]

Too late.

You done ate it didn't you? :msp_ohmy: