bump
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
bump
timberdollars
ArboristSite Operative
parts
cleanin house: Up for trades
038 Mag II triple outlet muffler
038 Mag II 52mm cylinder good, have oem used Mahle piston too, no pin/clips ( not in big hurry to part with it)
Jonsereds 630 super 48mm cylinder/piston NICE SHAPE, thin ring fits Husky 162 61 266 etc. closed port upgrade OEM
Couple 038 Mag carbs unkown condition, a Bing, Tilly, tilly is parts I think it has broke idle screw.
028 Super OEM wire mesh air filter, (I like these, more power, never wear out)
Partner 65mm open port cylinder from S65, perfect
044/046/ms 440/460 HD air filter with pre filter and foam insert OEM
Lookin for Partner stuff, also Jonsered 2051, 490, Poulan 475/505/325/425, and Bars for these 18"+
PM me
cleanin house: Up for trades
038 Mag II triple outlet muffler
038 Mag II 52mm cylinder good, have oem used Mahle piston too, no pin/clips ( not in big hurry to part with it)
Jonsereds 630 super 48mm cylinder/piston NICE SHAPE, thin ring fits Husky 162 61 266 etc. closed port upgrade OEM
Couple 038 Mag carbs unkown condition, a Bing, Tilly, tilly is parts I think it has broke idle screw.
028 Super OEM wire mesh air filter, (I like these, more power, never wear out)
Partner 65mm open port cylinder from S65, perfect
044/046/ms 440/460 HD air filter with pre filter and foam insert OEM
Lookin for Partner stuff, also Jonsered 2051, 490, Poulan 475/505/325/425, and Bars for these 18"+
PM me
chopperfreak2k1
Addicted to ArboristSite
i volenteered to sharpen some chains on my FIL's husky 141 and immediately found it needs-
top cover
clutch cover
starter assembly
muffler
air filter
if anybody has any of this stuff PM me and we'll see if we can work something out. i got little money and i'll look around see what i got to trade. i'm really trying to make this happen for him. he's done so much for my family when i couldn't and never took a dime for it. so when i get the chance to do things like this for him i jump at it. thanks
top cover
clutch cover
starter assembly
muffler
air filter
if anybody has any of this stuff PM me and we'll see if we can work something out. i got little money and i'll look around see what i got to trade. i'm really trying to make this happen for him. he's done so much for my family when i couldn't and never took a dime for it. so when i get the chance to do things like this for him i jump at it. thanks
Last edited:
I could use the Bing. Pm sent.
Duke Thieroff
Fill your hands, you SOB!
Got a Homelite 1050 Automatic I'd consider trading out for other saws. Vintage Muscle or Modern Saws will be considered.
Isn't a runner yet, has compression and spark, I suspect it needs carb work, I put new diaphramgs it, had a little trouble idling. Both oilers work, and has been cleaned up pretty well. Sports a Tilly HL.
Needs a little recoil work, just a smaller diameter rope needs installed.
Chris
Isn't a runner yet, has compression and spark, I suspect it needs carb work, I put new diaphramgs it, had a little trouble idling. Both oilers work, and has been cleaned up pretty well. Sports a Tilly HL.
Needs a little recoil work, just a smaller diameter rope needs installed.
Chris
If any of you guys could help me get a flywheel side case half for a Husky 394/395 I would be very appreciative with parts or cash. thanks!
I can get ya one. Want an entire case if possible?
An entire case would be great. Let me know what to send for it and if you need anything for your projects.
Alrighty, I might have one in my stash, but I know where one is otherwise. Need any other parts?
Let me do inventory this afternoon and send you a PM.
Nardoo
Addicted to ArboristSite
I need a chain tensioner (early) and pair of main bearings for a Stihl 019T. Happy to pay $$$ and shipping to me in Oz.
Al.
Al.
Chris J.
Addicted to ArboristSite
Got a Homelite 1050 Automatic I'd consider trading out for other saws. Vintage Muscle or Modern Saws will be considered.
Isn't a runner yet, has compression and spark, I suspect it needs carb work, I put new diaphramgs it, had a little trouble idling. Both oilers work, and has been cleaned up pretty well. Sports a Tilly HL.
Needs a little recoil work, just a smaller diameter rope needs installed.
....
...
Chris
Chris, that exhaust port looks like the one on my C-72 up for trade. I'm guessing that's a result of running it rich with standard motor oil (old-school manufactorers recommendation).
Duke Thieroff
Fill your hands, you SOB!
I would assume so, most older saws I've dealt with look about the same, they were also run quite a bit heavier on the mix oil. It builds up over time. Larger bore saws were generally bought and used by guys serious about cutting wood, whether that means for their own user professionally. That would imply quite a bit of run time.
Gotta love the oldies, for sure.
Chris
ChainsawmanXX
Addicted to ArboristSite
Hey ya'll needing a couple of parts.
Stihl 031 Bar stud,
Stihl 056 bar stud
Stihl 056 Clutch cover
husky 181 oiler gear
Bar for 076, 28 or longer.
parts for Stihl 066
Carb box, Piston and rings, Outer muffler.
Stihl 031 Bar stud,
Stihl 056 bar stud
Stihl 056 Clutch cover
husky 181 oiler gear
Bar for 076, 28 or longer.
parts for Stihl 066
Carb box, Piston and rings, Outer muffler.
Tree Wacker
ArboristSite Operative
bump still needing a parts saw or anything that will pull a 48 inch bar
Mastermind
Work Saw Specialist
I can hook you up with a perfect running, freshly rebuilt 066 for 600.00
Still need A brake handle for a 346.May have something you like in trade?
Wait a minute? You don't have any money?!?
:hmm3grin2orange:
:hmm3grin2orange:
