Swap meet...

[Chris J.]

Missed one the other day, one is a 1612 the other is a 1614. Chris, if you want them, they are yours for shipping cost.

Poulan 23/25 has the white death on the clutch cover and appears to be locked up, misc. parts saw only. same deal.
...

Thanks! I'll send a PM, just let me know what you need for postage.

I could end-up being a Skilsaw 16xx hoarder , or I could have two runners with CBs & plenty of spare parts .



<><>><><><><><><><><><><><><><><><><><><><><><><>

To the folks waiting for parts:
Life threw us for a loop just before Christmas. My FIL has been in one hospital and two rehab facilities in the last month, and he may not get to go back to the assisted living facility where he lives with my MIL.

I plan to get the parts ready tomorrow or Wed, even if I have to beat the 361 into submission .

 

[crazyjay]

041 super power head and parts.

looking to trade running 041 super and parts for 066 big bore kit and extra parts,
needs muffler and screws for handle

 

[Jimmy in NC]

Two 3-25 McCulloch and Strunk CP

Have these three saws that are as best I can tell complete. Missing chain for bow bar. Recoil is removed and in pieces from Strunk but included in a plastic bag. Two McCulloch saws are stuck but I have not tried to free them and I know they have been inside. If I find time in the next few days I'll add some penetrating oil to the cylinders and see what happens. Have not tried to turn the Strunk. Picked them up a few months ago and just tired of tripping over them. I do not want to part them out as they are very complete. I have too many antique projects and just need runners right now.

Saws are in Greensboro NC but can be in Raleigh NC area too...

(Please PM if interested as I do not check this thread often!)

**3-25 with bar and chain is accounted for**
**Bow has a new home**

 

[MacLaren]

Have the 30" Tsumura Light in Stihl mount .63 gauge. Practically new. Used for 3 or 4 cuts. Pm if interested.

 

[turbo885]

husqvarna 285

i need a rewind pulley[501 40 2402] or even the whole rewind for a husky 285 thanks Bill

 

[Jacob J.]

i need a rewind pulley[501 40 2402] or even the whole rewind for a husky 285 thanks Bill

Bill- which ignition do you have, Femsa or SEM? Reason I ask is there's two styles of starters and pulleys. I can't tell by looking at the IPL
which pulley that number refers to. Does it have two or three engaging teeth?

 

[o8f150]

i know this isn't chainsaw related but i was wondering if anyone had about 4 sticks of 33 degree clipped head framing nails,, paper collet and 3",, i have these 2 framing guns that i have no idea if they will work ok,, i hate to spend 30 dang dollars for a whole box of nails if they are not going to work right,,
i have a little bit of green

a friend of mine has some,,, i hope one of these will work,, my boshtich nailer bit the dust today

 

[turbo885]

Bill- which ignition do you have, Femsa or SEM? Reason I ask is there's two styles of starters and pulleys. I can't tell by looking at the IPL
which pulley that number refers to. Does it have two or three engaging teeth?[/QUOit
the pulley has 2 slots for the dogs to hit if that is what you mean if not let me know and i will pull the flywheel and check ignition thanks BILL

 

[vw_motorsports]

looking for a clutch cover/brake for my craftsman 42cc ive heard wild thing cover will work thanks,dave by the way mine came with that easy adjust cover broke 2 times just want to make it simple again

I should have a cover for you send me a PM

 

[vw_motorsports]

Anybody want these?

(Not the Husky)

I need a nice 029/290 series plastic clutch cover and a nice Stihl 16" or 18" .325 bar.
Would like a wood boss or farm boss.

Thanks!
BBB

pm sent

 

[Jacob J.]

the pulley has 2 slots for the dogs to hit if that is what you mean if not let me know and i will pull the flywheel and check ignition thanks BILL

Ok, that means you have the SEM ignition, which is the thinner starter housing.

 

[Bowtie]

28" Jonsered/Husky bar

Any interest in this before I make it fit a Stihl?

 

[o8f150]

Any interest in this before I make it fit a Stihl?

is it 3/8 50 gauge??

 

[Bowtie]

is it 3/8 50 gauge??

Pretty sure its .063. and it is 3/8. It is pretty worn but i will run it if no husky users want it.

 

[o8f150]

Pretty sure its .063. and it is 3/8. It is pretty worn but i will run it if no husky users want it.

:bang::bang::bang:

 

[Bowtie]

:bang::bang::bang:

LOL, sorry man...

 

[Wileyone27]

Hey all I am looking for a air filter for a poulan 3500 or 3600. I don't have anything to trade, but will purchase it. Thanks

William

 

[shawn022]

NOS stihl pistons and oiler

I have a couple nos 47mm pistons for an 08s/ts350, one nos piston for a stihl 07 and a nos oiler for a contra or 090.

Looking for a metal recoil and plastic flywheel cover for a 920 jred, bunch of jred 625 stuff, 18" stihl b/c and many other assorted saws parts.

 

[jimbo1490]

Any interest in this before I make it fit a Stihl?

Before you go hacking that thing up with a grinder, why don't you just trade it for a nice white bar that says "STIHL" on the sides in big black letters:biggrin: I don't think I have a 28" just now but I do have 25" and 36".

Jimbo

 

[cutforfun]

I am looking for a loop of chain for a 36 in bar that is 404 x .058 gauge i have a spinner so if you just have a piece of a role that would work to , some stuff to trade and bills .
thanks