Swap meet...

[o8f150]

If you still need the mufler i have one BILL

thanks bill but i just found out jacob is hooking me up with one

 

[homelite028]

041 stihl parts and 610 mcculloch and homlite ez parts and other newer homelites

i have a bunch of parts theses got broken up.. i have whole motors with flywheeles and coils starters and few other things and two 610 mccullochs 610 mcculloch in parts pistons and stuff in great shape.. i have 330 and 360 homelite parts and other models

 

[dh1984]

Looking for some Bar stud spacers for an echo 8000. so the bar i orderd for it uses the red bar stud spacers so it will work on my saw.

Let me know what you have i got Green slips to make up for the few parts i have.

 

[Eccentric]

Another chain swap: I have a new in box 33rsc72 chain that I would like to trade straight up for a new 70 dl non safety chain.

I'm still digging through my stuff to find that clutch drum for you. I have the SXL spike and screws and hardware you were asking about. Do you still have that 70DL 72LGX loop we talked about? If I can't scare up a drum, I'll cover shiping for the loop of chain (small USPS priority flat rate box) if you're game.

 

[hoss]

Do any of you guys have a Mac 890/895 etc. style automatic oil pump you can spare? I can pay or trade. I have a parts 7-10 mac with a good top end or many other mac (and other brand) parts to trade also. Thanks for any help.

Bumpitty bump bump

 

[MEATSAW]

I'm still digging through my stuff to find that clutch drum for you. I have the SXL spike and screws and hardware you were asking about. Do you still have that 70DL 72LGX loop we talked about? If I can't scare up a drum, I'll cover shiping for the loop of chain (small USPS priority flat rate box) if you're game.

Chain for spike kit? Deal. Now get back to looking for more schtuff.

 

[tbone75]

Looking for some bars.Need 1 - 18"-20" x 3/8 for Husky 359s and 1 - 28" -??" x 3/8 for a Dolmar 143. Don't have to be purdy just usable.Got a few things to trade???? or moldy green paper.

 

[tbone75]

Also looking for (2) clutch covers for Dolmar 120s or just all the brake parts including handles.I know I have something you can use? :msp_biggrin:

 

[o8f150]

Looking for some bars.Need 2 - 18"-20" x 3/8 for Husky 359s and 1 - 22"-??" x 3/8 for a Makita 6401 and a 28" -??" x 3/8 for a Dolmar 143. Don't have to be purdy just usable.Got a few things to trade???? or moldy green paper.

let me check john,,, i might have a 18 or 20 huskie bar

 

[Brian_NC]

I need a transfer cover for a 365xt, or a set from a 372xt. I dropped one this afternoon and I guess it hit just right and broke. If anyone can help I would sure appreciate it. I've got cash or could trade a few MS440 parts. Thanks.

 

[little possum]

I do not feel the need for this Husky 350 with a scorched top end, and missing the filter and top cover.. Anyone think they wanna do some swapping?

 

[o8f150]

Looking for some bars.Need 2 - 18"-20" x 3/8 for Husky 359s and 1 - 22"-??" x 3/8 for a Makita 6401 and a 28" -??" x 3/8 for a Dolmar 143. Don't have to be purdy just usable.Got a few things to trade???? or moldy green paper.

john,, is that a small huskie mount???? i have a 20" 72 dl,, 3/8,, let me know if that will work for oyu

 

[tbone75]

john,, is that a small huskie mount???? i have a 20" 72 dl,, 3/8,, let me know if that will work for oyu

It should work! PM on the way!

 

[Mastermind]

I do not feel the need for this Husky 350 with a scorched top end, and missing the filter and top cover.. Anyone think they wanna do some swapping?

What do ya want fer it??????

 

[tmessenger]

I do not feel the need for this Husky 350 with a scorched top end, and missing the filter and top cover.. Anyone think they wanna do some swapping?

Just what you always wanted, excellent compression, good runner, oils good.

 

[Jason M]

Ive got two Homelite 360 saws for parts. I want to say bolth of them are seized and I know for a fact there bolth missing the carbartors. One has a 18 or 20 inch bar the other has none.

I would like to trade bolth of these saws for some 064 parts, I can get some Pics of the saws and I will post a Pic of the 064 I have and you can see what I need.

Handle,
Carb covers inner/outer,
Dogs,
Brake handle, mines cracked.

The chain will still slip when I have the brake handle on, so I'm guessing I need some parts in there to. So anything for a 064 is what I need I also have a 010AV and a Husky 142 I could trade for parts.

Jason.

 

[o8f150]

Ive got two Homelite 360 saws for parts. I want to say bolth of them are seized and I know for a fact there bolth missing the carbartors. One has a 18 or 20 inch bar the other has none.

I would like to trade bolth of these saws for some 064 parts, I can get some Pics of the saws and I will post a Pic of the 064 I have and you can see what I need.

Handle,
Carb covers inner/outer,
Dogs,
Brake handle, mines cracked.

The chain will still slip when I have the brake handle on, so I'm guessing I need some parts in there to. So anything for a 064 is what I need I also have a 010AV and a Husky 142 I could trade for parts.

Jason.

how much would you want for the huskie 142,,, i have some new carlton and windsor chain i would trade for it or i have a little bit of green usless paper,,,

 

[Jason M]

how much would you want for the huskie 142,,, i have some new carlton and windsor chain i would trade for it or i have a little bit of green usless paper,,,

I dont know whats there worth, 80ish dollars or so. What size are the chains you have, I have a 20" bar that I found with 064, but form what I understand thats a little small for that size saw:msp_rolleyes:

Jason.

 

[o8f150]

I dont know whats there worth, 80ish dollars or so. What size are the chains you have, I have a 20" bar that I found with 064, but form what I understand thats a little small for that size saw:msp_rolleyes:

Jason.

i can spin any length chain,, i have semi chisel and full chisel both

 

[o8f150]

I dont know whats there worth, 80ish dollars or so. What size are the chains you have, I have a 20" bar that I found with 064, but form what I understand thats a little small for that size saw:msp_rolleyes:

Jason.

is the 142 a runner or a parts saw??