Swap meet...

[chainsawwhisperer]

how bout getting me a job i would be a good ground guy so you could show me the ropes and i need the money for the rope as well rough labor is not a prob i worked on a oil rig for a while as roughneck and am more than willing to learn i will admit i have done crazy #### and lost my liscense and everything but i am trying to get on the right foot just anyone that can help i will work

Do you have a brother on this site as well?
CSW

 

[little possum]

Anybody have a extra outside small dog for a 371/372 or what ever else will fit, or maybe a set of the big dogs.
Thanks

Wigglesworth, I cant believe that saw has not sold yet. Has it been posted on the trading post?

Honkie, same thoughts on that 285 as Wigg's Homelite, suprised it hasnt had any hits

If I had the money, Id by them all
Like my parents say about the dogs. "you cant keep them all"-well Im trying

 

[chainsawwhisperer]

Hey Wiggs,
Try to unload it here! lol
http://www.arboristsite.com/showthread.php?t=57106&page=16

 

[volks-man]

Still looking for a decent 18-20" Stihl bar, 0.325 pitch and 0.063 gauge for an 026. Trying to finish up a saw I'm giving to my dad and the budget is tight. If anyone has something let me know.

i have a 3003 mount stihl 18" roller tip in .325 .063.
not pretty, but functional. slap a coat of stihl rattle-can on it and you'd be good to go!:rockn:
what have you got to trade?

 

[snofrog]

Sounds silly, but I need the 4 cover screws for one of my ms440s.

3 - m5 x 20 9022-371-1020
1 - m5 x 35 9022-341-1080

I should just order them, but the Baileys price averages out to over $3 per screw!

Used is just what I'm looking for!

you could just stop in at the andersons . they stock a lot of metric fasteners

 

[fredmc]

Anyone need a non cat muffler or an unlimited coil for a 346-353 husky? I have a good used top end for a 660 stihl and the muffler. I need 660 bearings seals and rings for another 660.

 

[cbolyard]

i have a 3003 mount stihl 18" roller tip in .325 .063.
not pretty, but functional. slap a coat of stihl rattle-can on it and you'd be good to go!:rockn:
what have you got to trade?

Could you email or post some photos? I've traded out about all my saw parts, but I have cash

 

[forestryworks]

i've got a 361 3/4 wrap handle (stihl oem) to trade for a 440 half wrap (stihl oem)

it's complete, you'll just need to get the screws and the clutch side AV spring as it is a different
spring from the half wrap for the 361.

i'll dig up the part # when i get back later today.

 

[sefh3]

Pioneer Holiday II

I have this saw and am looking to trade for it. Saw started and ran on the last pull before the recoil spring went south. The bar is rusty and in pretty bad shape. The fastener for the air filter plate is broke. I thought I had another one for it but who knows where it went. Let me know what you have. Looking for projects in the flavor of Stihl or Husky.

 

[parrisw]

I got a XL2 and a super 2, both good condition, I haven't got around to getting them running, both feel like have good compression. Looking for Stihl bars in 3/8 .050

 

[volks-man]

Could you email or post some photos? I've traded out about all my saw parts, but I have cash

 

[dragrcr]

i've got a 361 3/4 wrap handle (stihl oem) to trade for a 440 half wrap (stihl oem)

PMsent.

 

[sloch24]

you could just stop in at the andersons . they stock a lot of metric fasteners

Yeah.. I'll have to go there and take a look. I kinda wanted the t-27 torx heads on them, keep it stock and simple.

I might just run down to the local dealer and see if they have a pile of screws that I can weed through..

 

[john taliaferro]

Dragrcr i sent pay pal on the 12 th ,you should ck your pm s

 

[Hagen70]

Remington Logmaster

I have a really good looking pull start/flywheel cover for a Remington Logmaster for trade. This is not the kind that also says Mall on it. Should probably post a picture

 

[Hagen70]

Husqvarna 266 268

I have a Husqvarna 266 piston and cylinder to trade. These are new aftermarket never used. The cylinder has open transfers so to me it is like a regular 268 cylinder but of course will fit other saws in the family. Also I will include a used cylinder from a 266, it is a Mahle and still very useable. Includes the pin, circlips, and ring. Let me know what ya got if interested. May even throw in an aftermarket pull start for said saw that still looks new for the right trade.

Bump

 

[WadePatton]

good used bar for dolmar 116

no more than 20-22". 18-20" would be ideal. just something to get it sorted out with. i'll get a new one later if i can get a used one now.

thanks

send pm.

 

[epicklein22]

Back on the hunt for a 036 jug.

 

[redray46]

404 chains to swap

I have 3 each.404,60 link and .063 gauge chains to trade.They came off an 08s Stihl.One is an Oregon #52,the other two are Poulans #8G3.The chains are in very good condition,75% left.I need parts for a Stihl MS200t,handle,gas tank or what else do you have?

working saws;Stihl's,MS 180,032AV,034AV Super,038AV Super.
Husky 340,2 x 394 projects.
Echo's 2x 302S.Cs 3450.
Homelite project 750 (may be for sale)













v

 

[fredmc]

Bump

Whatcha looking for I know where a few parts saws are. PM me