the all aussie dribble thread!

[chippy]

Vince, I'm going to need that tacho you have spoken of...

Hope it's good for north of 35,000 RPM then I can use it on The OZ.

 

[Creeker]

Vince, I'm going to need that tacho you have spoken of...

Hope it's good for north of 35,000 RPM then I can use it on The OZ.

Is that like for checking three or four at a time and all them rpm's add up ?

 

[chippy]

Chinese bloke just sent me an email, wants world rights to Vinces vid. (never seen done before - actually cut wood) and chippys sans
verbose descriptions of how good they are, contract pay big time - all rice you can eat and two story trailer to carry 15 chainsaw on
wooding expidition...................jeez, if I wasn't so busy I'd try an cut 'em out for that......lol

Now we've seen pics of the roo shooters with the ute tray circled with hanging roos, just think of that and someones trailer circled with OZITOS hanging proudly, but like the roos fkd...lol.






And the word yr searching for chippy san is "denizen" .... !

Denizen huh...how about doyen?

 

[chippy]

Is that like for checking three or four at a time and all them rpm's add up ?

No....it sounds like a model aeroplane engine once you give it heaps, only 10 times loader....best sounding saw ever

 

[Creeker]

Q denyon Q - is really DOYEN, OK can see that ( clear as mud) although might need to borrow the coke bottle specs all
you little asian blokes have to wear.

 

[chippy]

The dope I smoked a few months back still hasn't worn off obviously

 

[chippy]

And by the way, that Ozito I've got hasn't skipped a beat and it's been used for an hour every week, plus some

 

[Creeker]

Orright, the " little asian bloke " was a litttle below the belt, just to prove yr bona fides though pls think carefully over the following and answer 99% right, your future credibility here now rests in yr hands.....

* You know that none of us actually drink Fosters beer, because it tastes like piss. But we let the world think we do. Because we can.

* You have some time in your life slept with Aeroguard on in the summer. Maybe even as perfume.

* You've only ever used the words - tops, ripper, sick, mad, rad, sweet
- to mean good. And then you place 'bloody' in front of it when you really mean it.

* You know that the barbecue is a political arena; the person holding the tongs is always the boss and usually a man. And the women make the Salad.

* You say 'no worries' quite often, whether you realise it or not.

* You understand what no wucking furries means.

AND THE CLINCHER - write in 500 works or less what LSD means in this sentence.

A boy asks his granny, 'Have you seen my pills, they were labeled LSD?' Granny replies, f**k the pills, have you seen the dragons in the kitchen?

You have 12 days to answer.

 

[peter92]

Q denyon Q - is really DOYEN, OK can see that ( clear as mud) although might need to borrow the coke bottle specs all
you little asian blokes have to wear.

Try CARLTOON CHAIN ASWELL

 

[chippy]

Vince, those muffler bolts x 3 w/ nuts, 1127 series saw, $40 retail from the Steal dealer.....30 bucks with my discount.....

And they've dropped the price of the hp ultra to a little over 20 bucks a litre if you buy it by the litre, but if you buy it by the 5 Ltrs container it's 125 to 135 bucks.....try working that one out.

 

[peter92]

Vince, those muffler bolts x 3 w/ nuts, 1127 series saw, $40 retail from the Steal dealer.....30 bucks with my discount.....

And they've dropped the price of the hp ultra to a little over 20 bucks a litre if you buy it by the litre, but if you buy it by the 5 Ltrs container it's 125 to 135 bucks.....try working that one out.

That will be about right, i paid 35 bucks for a litre up here

 

[bennn*e]

Any one want some of the gb ti bars from left coast supplies, if it's a better deal than local, I'm thinking of getting some of the do25 in .404, 20"$22/24"$27/32"$36usd + SHIPPING
There is a TI d009 3/8 32"there as well
http://leftcoastsupplies.com/?s=GB+Pro+Top+Titanium+CN40&post_type=product
http://leftcoastsupplies.com/page/2/?s=gbf+bar&post_type=product

Wow that's crazy. Must be trying to get rid of them

 

[bennn*e]

any one got some suggestions for chain breakers and spinners?

Stihl NG7. Both a spinner and breaker which is handy. Only takes up one spot on the bench

 

[bennn*e]

So, I've been mucking around with this hydro water transfer printing abit, and due to inclimate weather and lack of better things to do, I did my 381 and 661. The first is real tree, worked well. Then I remembered why saw are orange... So the 661 I did blaze camo.
View attachment 440766 View attachment 440767 View attachment 440768

I've thought of doing one of my 026's is it hard to do?

 

[TEZZA]

Thinking of running 3/8" .058 chain setup on the Stihl 024.

Currently running .325" .063 chain with 7 tooth sprocket and a 16" bar. All of which is very worn.

What do you reckon?

 

[peter92]

Thinking of running 3/8" .058 chain setup on the Stihl 024.

Currently running .325" .063 chain with 7 tooth sprocket and a 16" bar. All of which is very worn.

What do you reckon?

i use to run it on mine, pulled ok

 

[Jimbo209]

Thinking of running 3/8" .058 chain setup on the Stihl 024.

Currently running .325" .063 chain with 7 tooth sprocket and a 16" bar. All of which is very worn.

What do you reckon?

Why??? can you get it super cheap
.058 in 3003 mount has that ever been made

 

[chippy]

Thinking of running 3/8" .058 chain setup on the Stihl 024.

Currently running .325" .063 chain with 7 tooth sprocket and a 16" bar. All of which is very worn.

What do you reckon?

I run 3/8 on my 029 no problem but don't be silly with how/what you cut.

 

[Snowy01]

I've thought of doing one of my 026's is it hard to do?

No not especially, the offer stands to anyone who would like one done. Im a bit snowed under at work but id be happy to trade it for technical advice

 

[rogue661]

Been using the 661 all week it's still going no problems as yet and it's getting stronger every tank ... I persevered with RS 3/8 chain 7 pin and 25in bar for a bit( I didn't try a 8 pin it may have helped?) but it seems to have a fat tune and likes load to wake up, easy fix if it had a H screw.
Anyways I couldn't be stuffed trying to match the chain to its power to get it working hard so switched over to .404 RS 7 pin 25in bar and wow its a wood butcher! with that setup lol, even a 20in bar in .404 RS loads it well enough to get it into a good tune..Do I like it? hell yeah! all I can say is I don't think I will pick up a ms660 ever again haha, 661 is one sweet saw ... Oh yeah here is a vid Just farting about in the mill yard cutting up rubbish to send up the back for firewood is running a 20in bar..