peter92
Addicted to ArboristSite
im sure i would loose my saw in the bush, was hard finding it the other day, getting fire wood
the all aussie dribble thread!
- Thread starter masculator
- Start date
Help Support Arborist Forum:
chippy
Addicted to ArboristSite
They really look great Snowy and I'd happily send you whatever bits off the saw you want to have a go at.....
Can you do the scabbard also?
Snowy01
ArboristSite Operative
Yeah I don't think it would be a problem. Ive pulled apart the pull start assy, hoping to get that done as well.
chippy
Addicted to ArboristSite
Perhaps Vince could send you all his Stihls and you could turn them into Husky ' s. ......not by painting them mind you, just loosen off the spark plug half a turn should do it.
chippy
Addicted to ArboristSite
How's it work Snowy? I'm guessing it must be a whole new process for each color?
Snowy01
ArboristSite Operative
Never thought id say it, but I'm going to have a look at a traded in 3120xp today.
Just, you know, to compare them to see, how bad it is. Yeah....
Just, you know, to compare them to see, how bad it is. Yeah....
Send him the OZITO chippy, a good camo' job should ensure its loss and demise from these pages.................
Snowy01
ArboristSite Operative
Ok, say your doing the air filter cover, it needs to be painted, so first step is to scuff back the original item using a scuff compound and scotch pad.
Then plastic primer is applied and allowed to "tac off". Depending on the film you are using and the affect your after you need to select a base coat.
I chose an orange I matched to the factory colour and applied. You have a dipping tub filled with water an optimal temp is 33 degrease, I use a heat element to achieve this. So you cut your film, which is where the image comes from and lay a sheet in the tub and let it sit for 90 sec. The the "activator" is sprayed over the film and it actually dissolves the film, respirator is a must. The you slowly push the item through the film. Its hard to get the film in all the corners and over fins and that, but you get the hang of it. Then clear coat and sit for 12-24 hours.
Its a process
VinceGU05
PSA vitim.
ok.. thats my excuse too
VinceGU05
PSA vitim.
Hey hey hey !!! Don't dis the Chinese saws. There are here for a good time not a long time [emoji12]Send him the OZITO chippy, a good camo' job should ensure its loss and demise from these pages.................
Check this one out chippy. $65 for 60cc brand new. Comes with all the safety gear also lol
chippy
Addicted to ArboristSite
That saw does alright for a first tank in that red box or whatever it is....looks hard and gnarly.
Was a shame not to see that guy at least wearing eye protection. The amount of times I've had stuff fly at me and smash me in the face/glasses I couldn't count....but it's really contributed to my sex appeal......
Bloody hell Vince, he'll have one of those next and we'll never hear the end it.........
It was getting through that log OK, probably holds the world endurance record now for the longest continuous run time known for that
model.
(Re PPE chippy, mostly it's just not worth the effort to put it on, they never run long enough)
It was getting through that log OK, probably holds the world endurance record now for the longest continuous run time known for that
model.
(Re PPE chippy, mostly it's just not worth the effort to put it on, they never run long enough)
chippy
Addicted to ArboristSite
What people just don't get is you can buy 15 of those saws to the one equivalent Stihl,you get 15 chains and 15 bars and there's little likely hood of the Stihl outlasting that saw 15 fold....
And you have as much chance accidentally leave the saw behind in the bush, running it over with your vehicle, dropping a tree on it, giving the bar the pinch of death as you do with a high quality item, but care factor could be measured in zeros
And you have as much chance accidentally leave the saw behind in the bush, running it over with your vehicle, dropping a tree on it, giving the bar the pinch of death as you do with a high quality item, but care factor could be measured in zeros
VinceGU05
PSA vitim.
i bought a stihl chain for it.. nearly cost as much as the whole saw !! that was the Chinese chain cutting there. i resharpened it first cause the angles were all over the place and different length cutters and raker depths.
chippy
Addicted to ArboristSite
Did you get it from the denyon of quality chainsaws and knowledgeable staff, Bunnings?
VinceGU05
PSA vitim.
nope. ebay. but can buy off their website too. they are in preston. $10 to ship it to me across town.. not bad.
Jimbo209
ArboristSite Guru
Shipping on the GB CN40 TI is about 35 USD from lcs.com
Ti for under$100 shipped usps priority
Ti for under$100 shipped usps priority
chippy
Addicted to ArboristSite
Popped the limiter on the H screw.....full tank of gas, everything ship shape, checked H screw 1 1/2 turns off the stop, warmed it up, opened it right up, 2 more full turns out still no drop in revs, missus starts screaming at me she's trying to sleep (she's crook)........bugger.
The Oz Racing saw is easier to tune than this!
The Oz Racing saw is easier to tune than this!
Snowy01
ArboristSite Operative
The finished product
Chinese bloke just sent me an email, wants world rights to Vinces vid. (never seen done before - actually cut wood) and chippys sans
verbose descriptions of how good they are, contract pay big time - all rice you can eat and two story trailer to carry 15 chainsaw on
wooding expidition...................jeez, if I wasn't so busy I'd try an cut 'em out for that......lol
Now we've seen pics of the roo shooters with the ute tray circled with hanging roos, just think of that and someones trailer circled with OZITOS hanging proudly, but like the roos fkd...lol.
And the word yr searching for chippy san is "denizen" .... !
verbose descriptions of how good they are, contract pay big time - all rice you can eat and two story trailer to carry 15 chainsaw on
wooding expidition...................jeez, if I wasn't so busy I'd try an cut 'em out for that......lol
Now we've seen pics of the roo shooters with the ute tray circled with hanging roos, just think of that and someones trailer circled with OZITOS hanging proudly, but like the roos fkd...lol.
And the word yr searching for chippy san is "denizen" .... !
