The Great WI 50cc Challenge

[04ultra]

Yes just like the 5100 - - but a 50cc saw shouldn't handle that way. Oh wait the 5100 is just good for bucking - - - you know all that power and 3/8 chain and all! LOLOLOLOLOLOL!!!!


Al :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

Al If I needed a limbing saw it would be the 435 or 211.........



.

 

[woodshed]

I'd like to try a MS200 with the rear handle. They sure look nice, I hear they handle extremely well.

Scott

 

[Fastcast]

What's a "menan"?!?!

Scott

Oh, guess I should have elaborated.....That's a man/woman. :censored:

 

[nikocker]

That's good.

Al If I needed a limbing saw it would be the 435 or 211.........



.

And if I need to buck or fell anything over 16" I use the 372 or the 261 converted to 262XP.

Al

 

[joatmon]

He he!

This thread is great. I know, that somewhere in North Carolina, TwoKay is blipping the throttle on his little HotRod 026 laughing his hiney off.

Dolmar 5100: ~ $400

Husqvarna 346XP: ~ $500

HotRod 026 with ole Brian at the controls: Priceless

ole joat

 

[SawTroll]

Niko, fatten up that low speed screw and it should liven up the trigger response.
I haven't noticed that being a problem on any 5100's.

I did that immediately after the saw arrived from the US, as accelleration was sluggish, and it sure helped - but not enough for my liking.
Further fattening attempts later have not helped.

The saw is stock minus spark screen, as is my 346xp.

It is not a problem, and the saw sure is a good one - just not quite up to the hype that some post on here!

 

[SawTroll]

Al If I needed a limbing saw it would be the 435 or 211.........



.

Suit yourself - I guess it depends on the type of limbs you have - but I sure wouldn't be content with that!

Limbing actually is the most time consuming cutting that I do in the woods - and also the most fun, when the saw is right!

 

[SawTroll]

This thread is great. I know, that somewhere in North Carolina, TwoKay is blipping the throttle on his little HotRod 026 laughing his hiney off.

Dolmar 5100: ~ $400

Husqvarna 346XP: ~ $500

HotRod 026 with ole Brian at the controls: Priceless

ole joat

Imo, the Husky is well worth the difference, and then some!

 

[belgian]

limbing actually is the most time consuming cutting that i do in the woods - and also the most fun, when the saw is right!

+1 !

 

[spike60]

You guys putting us on? I mean, this thread isn't really still going is it?

 

[Fastcast]

Imo, the Husky is well worth the difference, and then some!

I think Chevy demonstrated quite clearly in his video, that the amount of time saved, per limb, with the exhilarating acceleration the 346 has over a 5100 must equate to something like .00000000000000000000125 of a second.

 

[Fastcast]

You guys putting us on? I mean, this thread isn't really still going is it?

Just for you Spike....LMAO

Here's your beer.

 

[Kemper]

I think Chevy demonstrated quite clearly in his video, that the amount of time saved, per limb, with the exhilarating acceleration the 346 has over a 5100 must equate to something like .00000000000000000000125 of a second.

Yea ole saw troll must really value his time...

 

[nikocker]

Probably.

I think Chevy demonstrated quite clearly in his video, that the amount of time saved, per limb, with the exhilarating acceleration the 346 has over a 5100 must equate to something like .00000000000000000000125 of a second.

But that's just enough time for the 5100 owner to reflect and say "why did I buy this doggy piece of crap?"

Enjoy the weekend guys I'm off to the woods up north!

Al

 

[04ultra]

But that's just enough time for the 5100 owner to reflect and say "why did I buy this doggy piece of crap?"

Enjoy the weekend guys I'm off to the woods up north!

Al

Hmmmmmmmm...................I think the 026 pro will out cut a 346NE W/cat. ..........

Talk about mutt ..........


.

 

[CHEVYTOWN13]

He's trolling playing his flute...

I've been running the saw a little fat since the last modification. It was time to lean it out on the L setting. And get this saw sounding mean! The acceleration is now down to .00000000000000000000025 of a second difference:greenchainsaw:

I swing this hot rod in the bush and alls I can say is it's a lot of fun making noise in the canyon in the form of a hot rodded Dolmar 2 stroke

Same Canyon Oak with a fresh sharpening.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/0grVhzlyUQQ&hl=en_US&fs=1&color1=0x5d1719&color2=0xcd311b"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/0grVhzlyUQQ&hl=en_US&fs=1&color1=0x5d1719&color2=0xcd311b" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[borwicks]

I read this post and I did not see what size oak you cut.

 

[SawTroll]

I think Chevy demonstrated quite clearly in his video, that the amount of time saved, per limb, with the exhilarating acceleration the 346 has over a 5100 must equate to something like .00000000000000000000125 of a second.

That is BS, the difference is quite notisable - if not I would never have mentioned it!

Also remember that I am talking of stock saw (or close to stock), not modded ones! :greenchainsaw:

 

[Steve NW WI]

You guys putting us on? I mean, this thread isn't really still going is it?

It's by far the longest thread I've started. Starting to think the 5100 will need a new bar before this thread dies!

That is BS, the difference is quite notisable - if not I would never have mentioned it!

Also remember that I am talking of stock saw (or close to stock), not modded ones! :greenchainsaw:

Put me in the "not a noticable difference" camp. I just pull the trigger and put the bar in the wood, and the saw does it's thing beautifully. Maybe I just don't move fast enough to appreciate the 346? Or maybe as a 346 operator, you beleive the saw will stall if it's not right at the redline when you hit the wood? oke:

Just havin' some fun with y'all - some people take this far too seriously! Go cut some wood or something!

 

[SawTroll]

For some reason, some members seem to get desperate when someone speaks up against the 5100S hype, and try to discuss 50cc saws in a sivil way! opcorn:opcorn:opcorn:

That behaviour destroys otherwise good threads - but I assume that the purpose is just that - to conseal the facts and the real discussinon in a lot of BS.

Sure it is a good saws, but not quite what some members here say that it is...........