The made in north america Old Magnesium Swap Meet.

[crane]

well ive been researching these damn washers. only two lisitngs on feebay are 7 dollars a piece, and cant find them anywhere else. anybody know a better source for Homelite part number 58970, or something else thatll work.

head down to the hardware store. You should be able to fink a hard fiber washer(plumbing dept), Get the right size so you can cut, file, the rectangle hole in it. Thickness is important, but any tolerance can me made up by adjusting the spring(putting more or less down pressure on both washers and the dog mechanism). A soft washer will break down quicker and is more likely to bind the mechanism. The idea of the fiber washer is to add a slight amount of resistance to force the shoe out to engage the starter cup. A metal washer would not offer enough friction to produce the resistance. This is why it is critical to keep the washers FREE of oil and other contaniments. Can`t find a fiber washer, try a nylon one(you will have to roughen it up a bit. Hope this helps

Drew

 

[turbo885]

gb bars

View attachment 225645View attachment 225644
i have 3 new 3/8 -16"-050 gb bars 202 mount pm if interested

 

[67L36Driver]

Where can I find a bearing setup for an Oregon 30666 rim drive clutch drum on a PL-4 Remington. Got one today at Orschlens.

Bailey's lists bearing ORF 11807 for the 30666 drum but I can't find the bearing on their website.:msp_confused:

Also need the Torrington inner race .375" i.d. x .500" o.d. x .530" long. Bearing house in town didn't even list it. Some kind of special.

May have to go the bronze bushing route again.

We have 'stuff'

Carl.

'Stuff' includes PL-4 and 5 parts left over from projects.

 

[AU_K2500]

anybody know if EZ ao parts and Super EZ ao parts are interchangable, specificly the oil and gas cap? i know the bar mount is the same. and theres only 3cc difference, so im assuming the case is the same. I hope im right. anyone know for sure?

 

[67L36Driver]

Hot damn! 52 cents a piece! maybe ill buy in bulk and sell em for 50 cents less than those other guys....lol:hmm3grin2orange:

STARTER DOG CHAINSAW FIBRE WASHER | Cheap Online Parts

That's the same outfit I found. They want 8 USD to ship to Missouri. W.T.H.?

 

[Homelite410]

Homelite 1050 Parts

I am looking for a clutch cover for a Super 1050 as well as a fuel cap.. Have green paper to trade!!! Thank you!

 

[pioneerguy600]

I don't see why you couldn't make something, it's just a round washer with a rectangular hole.

But what EXACTLY are they made from, thats the question.

I make them all the time for the old Pioneers I run.

 

[AU_K2500]

I make them all the time for the old Pioneers I run.

What type of material do you use?

 

[67L36Driver]

Remington auto oiler check valve.

Looking for a source for the Remington rubber duckbill used in SL-4A's and such.

Shown with a 1/4-28 hex nut for size.

Remington part #66383

 

[DSS]

Looking for a source for the Remington rubber duckbill used in SL-4A's and such.


Remington part #66383

I wonder if a homelite one will work? I got some of those on the bay for next to nothing. It looks bigger though.

 

[leeha]

On in a Mac fuel cap might work.



Lee

 

[Eccentric]

On in a Mac fuel cap might work.



Lee

Yep. The large frame Mac duckbills (with the nubs on top) may be the right size. They don't grow on trees however. I could use a few for my Macs. Guess I'll call Bob J and DM.

 

[67L36Driver]

Yep. The large frame Mac duckbills (with the nubs on top) may be the right size. They don't grow on trees however. I could use a few for my Macs. Guess I'll call Bob J and DM.

I bookmarked one on evilbay but, at over 10 USD for a forty year old part I'm not willing to go there.

I'm inclined to make my own checkvalve guts with a 1/4" dia. steel ball and a really soft compression spring.

 

[AU_K2500]

Gotta love customer service. emailed the guys at cheap online parts about those fiber washers, and if there was anything they could do about their 8 dollar shipping for something that weighed less than an ounce. He said he had 8 sitting in the back that he would throw in a standard envelope and ship to me at cost. 4.20 for 8 of em!

 

[AU_K2500]

Gotta love customer service. emailed the guys at cheap online parts about those fiber washers, and if there was anything they could do about their 8 dollar shipping for something that weighed less than an ounce. He said he had 8 sitting in the back that he would throw in a standard envelope and ship to me at cost. 4.20 for 8 of em!

I only need two. so, if anybody else needs some, PM me. ill get em to you quick, and free.

 

[bplust]

I have a 7/16" Homelite Sprocket

It's new, the part number is #44748, and you can see a photo of it here:

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

 

[bplust]

Yep. The large frame Mac duckbills (with the nubs on top) may be the right size. They don't grow on trees however. I could use a few for my Macs. Guess I'll call Bob J and DM.

Who/What is DM? I know Bob Johnson, buy stuff off of him from time to time, but I always like having multiple sources.

 

[Eccentric]

Who/What is DM? I know Bob Johnson, buy stuff off of him from time to time, but I always like having multiple sources.

Discount Marine. They have lots of Mac parts.

 

[Jacob J.]

Who/What is DM? I know Bob Johnson, buy stuff off of him from time to time, but I always like having multiple sources.

Discount Marine. They have quite a bit of obsolete stuff, but they can be pricey.

 

[AU_K2500]

I only need two. so, if anybody else needs some, PM me. ill get em to you quick, and free.

Ok, all three available sets are spoken for...Sorry to all of those that i wasnt able to help.

Any body know a good place to get tygon (spelling) fuel line? i need 1/4 and 1/8 maybe a foot or two of both, ya know, just in case.