tree monkeys 2153 deluxe

[lwhaples]

Thanks again for sharing. Gave me a lot more to think about.

 

[tpope]

Sweet build and pictures for us dummies. Thanks for the million words you have shared!

 

[Milkman31]

Ttt

 

[J.Walker]

So I'm thinking I now need another smaller saw to go along side of my other Tree-Monkeys stuff.
This build will be the perfect thing.

 

[heimannm]

Scott - I don't understand much of what you do but I know it works.

I am really happy to see that you are back on your feet, working in the shop, and posting again.

Great to have you back!

Mark

 

[EvilRoySlade]

I'm still hoping we get a video. That was some unique carving, I'd love to see how the Jonny responds.

 

[tree monkey]

Just out of curiosity, Is this destined to be a true "work" saw or is this a GTG toy? Is this a special build for this particular saw or is this your approach to all 346/2153's ?

it's going to be a work saw. the owner is a very fussy, demanding sob. he wants it to be as strong as I can get it.

 

[tree monkey]

the runs at 14.200 no load, and wants to run at 12,500 in the cut, but is being held back. I left the transfers with an upward angle to see the difference then cut flat. it.s back apart to cut the transfers flat.

 

[tree monkey]

 

[tree monkey]

not quite right

 

[drf255]

Subscribed. Very interesting build.

 

[KG441c]

View attachment 398291

not quite right

Where does the shorter burn pattern on the one side come from? More taper in the ceiling on that side?

 

[Mastermind]

R&D at it's finest.

 

[tree monkey]

I believe the lower right port is doing most of the work, pushing the charge to the left, leaving a dead space in the right side of the chamber.

the saw didn't have enough run time to read the chamber.

 

[KG441c]

I believe the lower right port is doing most of the work, pushing the charge to the left, leaving a dead space in the right side of the chamber.

the saw didn't have enough run time to read the chamber.

So if it continues to burn with that same pattern what will you change to even it out? Thanks

 

[tree monkey]

port timing, or port size, or port shape

 

[KG441c]

port timing, or port size, or port shape

Any one in particular u will start with in this particular situation?

 

[tree monkey]

I changed the roof angle this time

 

[KG441c]

I changed the roof angle this time

Flatter with less taper? I was working on my 440 transfers and debating flatter or tapered in the ceiling

 

[tree monkey]

flat, no upward angle