Vallorbe Racing Cut System

[scotclayshooter]

2£ is about the same as 30 swedish crowns and that is approx what the files cost here !!!

Hey buddy i hope you have a paypal account!

 

[SWE#Kipp]

Hey buddy i hope you have a paypal account!

hahaha

 

[tdi-rick]

<snip>

VLC2270-7 £8.46/FILE. These must be bought in quantities of 12 and the delivery time is 3 weeks approx.



<snip>

:jawdrop: That's $17.46 Aussie.....

To be fair, I can't find the LC2270-7 in any of my local catalogues either.

Vallorbe 6" flat (raker) files are around $5.75 here.

 

[Crofter]

I bet they sell about a million times as many flat raker files as they do flat chisel bit files so we have to pay for the special treatment!

I just wrecked one corner of a good file this morning by being pig headed on a couple of hard teeth from a bit of previous grinder hardening. I still had to take a fine propane torch to them and anneal em back a bit to file. The chisel bit files dont take near the gaff that a round file will, so mixing grinding and hand filing can be a problem. Use one of your farm team files to test each cutter on a new chain or a previous ground one before you dull a choice file that has nice clean crisp corners.

 

[SWE#Kipp]

This is what they look packed up and ready to be delivered

 

[Tzed250]

This is what they look packed up and ready to be delivered

Bring it!!!

 

[pecor]

Where? When? How much? :monkey:

 

[ents]

<a href="http://www.bigoo.ws/Images"><img border="0" src="http://media.bigoo.ws/content/gif/smiles/smiles_2.gif"></a><p style="margin-top: 0; margin-bottom: 0"><a href="http://www.bigoo.ws/Images"></a></p>

 

[pecor]

Their probably are on one of those High Jacked freighters off cape horn :jawdrop:

 

[Haywire Haywood]

Their probably are on one of those High Jacked freighters off cape horn

LOL... yep, and the crew is sharpening chains to pass the time.

Ian

 

[SWE#Kipp]

Nope Goran got an other job too, this is his "side project" and right now he is in Asia with his "real" job ,,,,,

 

[Edge & Engine]

This is getting closer to reality...stay tuned.

 

[chainsawwhisperer]

This is getting closer to reality...stay tuned.

ZZZ ZZZ ZZZ
Wake me up when they get here.
Yours truly,
Rip Van Winkle

 

[2000ssm6]

Any "set in stone" prices?

 

[046]

note the date of OP..... it's been ONE year of almost now.

IMHO this really hurts the credibility of this product.
the story of crying wolf comes to mind...

This is getting closer to reality...stay tuned.

 

[Edge & Engine]

Any "set in stone" prices?

No, not yet.

 

[Chopwood]

Washington Hot Saws must be doing the field testing on this thing.
Just buy some double-bevels boys, it's not really that hard.

 

[2000ssm6]

Washington Hot Saws must be doing the field testing on this thing.
Just buy some double-bevels boys, it's not really that hard.

I've been waiting on this system instead of buying $85 worth of square files for my FG-2. The $85 is looking better. I not going to even try to free hand square and I got 3 dull squares now that need to be sharpened.:bang:

Some advice for the others: Don't buy square unless you have a means of sharpening it.

 

[ents]

...Some advice for the others: Don't buy square unless you have a means of sharpening it.

That's why I'm waiting, and waiting, and waiting, and waiting.................

 

[Grande Dog]

Howdy,
Here's a youtube video for the ATOP.
http://www.youtube.com/watch?v=QnW309wWqO0
Regards
Gregg