Vallorbe Racing Cut System

[redprospector]

Course It's your native language Andy, sing it out! LOL

Hahaha. I speak redneck, that's my native language. In redneck corse would be acceptable.
I guess if I was going to be a smart aleck I should have used the spell check.

 

[24d]

Course It's your native language Andy, sing it out! LOL

I thot cents Mr. Fred lef we could all thow spell'n 2 da curb HAHA!

 

[24d]

________________________________________________________________________________________________________________________-

Hi Larry
Prototype is one thing, O serial production is cloose to production with option to change, we are there now

We have been in a council meeting today and processed all input from "you people over there. We have taken all fact and input into concideration and worked out an urgent change on the O serial units we have under testing in the US.

A cpl unit will be sent to every distributor who are involved in the testing. So please withdraw all testing and give us two weeks and you will have new units for testing. We will change the rollers enable to get a more strong top plate angel, we will also by this reinforce the wear resistence on the top plate and the top plate filing angel will be set to 17-19 degrees, for a good functioning work chain..

I"m not able to communicate with every singel person out there, but please convey on my behalf our thanks for the passion we see and hear from all involved.
Please beeing paitent, we work on a spot on solution.
Thanks and regards
Göran Carlström

 

[smokinj]

I think that is a typo. It uses the goofy file but does not present the file as in square filing. They are supposed to be working on a new prototype that holds the file on a different angle. Here is a picture of the file in position in a cutter on the jig.

Edit, sorry that is out of focus but gives a bit more detail of the roller position and the angle it holds the file.

I have seen this one and the price is going to be high!

 

[super3]

What do the files cost?

 

[Edge & Engine]

I received the revised file guide from Goran the other day, and today I found a spare moment to give it a try. I have never used a file to sharpen a saw chain in my life. This was the very first time. It took a little while to "get the hang of it", which I fully expected. But it wasn't too long before I was getting perfect angles and the teeth looked like they were sharpened by a pro
But the best part was yet to come. I slapped the chain on my 7900 and headed out to make some cookies. Now I've run square ground chain before, including a test chain that Goran had sent me. I know the chain that Goran sent me wasn't perfect, it was sharpened with an early version jig.
I was really impressed. Super smooth, and boy did it cut quick. I'm afraid I won't be going back to round ground chain.

 

[parrisw]

I received the revised file guide from Goran the other day, and today I found a spare moment to give it a try. I have never used a file to sharpen a saw chain in my life. This was the very first time. It took a little while to "get the hang of it", which I fully expected. But it wasn't too long before I was getting perfect angles and the teeth looked like they were sharpened by a pro
But the best part was yet to come. I slapped the chain on my 7900 and headed out to make some cookies. Now I've run square ground chain before, including a test chain that Goran had sent me. I know the chain that Goran sent me wasn't perfect, it was sharpened with an early version jig.
I was really impressed. Super smooth, and boy did it cut quick. I'm afraid I won't be going back to round ground chain.

This is all great but... ??????????????? When can we buy one??? If ever?? I keep hearing great things, but allot of good that does.

 

[SWE#Kipp]

I received the revised file guide from Goran the other day, and today I found a spare moment to give it a try. I have never used a file to sharpen a saw chain in my life. This was the very first time. It took a little while to "get the hang of it", which I fully expected. But it wasn't too long before I was getting perfect angles and the teeth looked like they were sharpened by a pro
But the best part was yet to come. I slapped the chain on my 7900 and headed out to make some cookies. Now I've run square ground chain before, including a test chain that Goran had sent me. I know the chain that Goran sent me wasn't perfect, it was sharpened with an early version jig.
I was really impressed. Super smooth, and boy did it cut quick. I'm afraid I won't be going back to round ground chain.

Did you get the 9,2mm rollers ??

 

[nategyoder]

Is this ever going to happen?

 

[Edge & Engine]

Yes, they should be out in several weeks, retail around $220

 

[parrisw]

Yes, they should be out in several weeks, retail around $220

Ouch!! How much is a square grinder.

 

[blsnelling]

Ouch!! How much is a square grinder.

$750, $900, $1700, $2300. Take your pick

 

[super3]

What do the files cost?

Once again.........How much are the files?

Or does it use the regular square file?

 

[Grande Dog]

Howdy,
It'll be a couple weeks yet before we're ready to ship. Our initial introductory retail price will be $199.95 and will include a couple files. The files are going to be about $7.50ea and about $75.00 per dozen. These are the links but, there isn't anything there except pricing. We'll populate the information as soon as possible. It will allow you to back order til we receive our shipment.
Regards
Gregg
http://www.baileysonline.com/itemdetail.asp?item=15080&catID=
http://www.baileysonline.com/itemdetail.asp?item=15080+DZ&catID=
http://www.baileysonline.com/itemdetail.asp?item=15280&catID=

 

[Haywire Haywood]

$200+ for a file guide? LOL... That right there's funny.

Ian

 

[2000ssm6]

$200+ for a file guide? LOL... That right there's funny.

Ian

Back to round for me.

 

[Tzed250]

.




$200?


Jiminy Christmas....




.

 

[046]

my used simington 450 was $275 shipped to me... but those kind of deals don't come up too often.

you can buy a new simington square grinder for about $700

$200 sounds is bit stiff for a filing guide... vote with your wallet

Ouch!! How much is a square grinder.

 

[Hddnis]

I'll probably give it a try when I get some spare scratch. $200 may be high for a file guide, but it is the first of its kind.

If all you whiners think you can do as good or better and bring it to market cheaper then start making and selling them.


Mr. HE

 

[046]

no whining from me... vote with your wallet

this was suppose to be an affordable way to achieve square grinding that's dragged on... and on...

I'll probably give it a try when I get some spare scratch. $200 may be high for a file guide, but it is the first of its kind.

If all you whiners think you can do as good or better and bring it to market cheaper then start making and selling them.


Mr. HE