bcorradi
Arboristsite.com Sponsor
No you do have some excellent insight on things...but I do find the model bashing a little overboard and repetitive.Just put me on ignore then, you don't have to read it!
No you do have some excellent insight on things...but I do find the model bashing a little overboard and repetitive.Just put me on ignore then, you don't have to read it!
Find a ms440(5,4 HP 13.9LBS.) if the stuff is mostly big. Run the ms361(4.4HP 12.3LBS) if the stuff is mostly under 2ft. Get 2 bars for the saw one 18 and one 24 and be done with it. Either will work just depends on the average tree size. You may want to go with the 440 and use the 250 as your limbing and smaller clean up saw. If you were open to other saws I would buy the 7900(6.3hp 13.6 lbs) tough to beat that power to weight ratio. That is what I am going to buy for my next big saw. Good luck....
No you do have some excellent insight on things...but I do find the model bashing a little overboard and repetitive.
Enter your email address to join: