What's On Your Bench 7-24-14 ??????

[Mastermind]

M-Tronics have invaded my bench.

 

[cgraham1]

Old school...
655

 

[Adirondackstihl]

Dolmar 7900 stock rebuild.
064 stock rebuild.
Husky 350 mod.
268XP stock rebuild

 

[KG441c]

M-Tronics have invaded my bench.

Of course! Everyone saw mine go from a turd to a 6 sec a cut faster saw!!lol

 

[Guido Salvage]

This, but it gets boxed tonight.



That and the Dayton badged Poulan 245 that is still in pieces after almost 2 years.

 

[woodeneye]

031AV E. I. gettin worked over while I wait for my paint to finish my 026 rebuild/paint job.

 

[fordf150]

couple of 261's and 362's(non mtronic) needing topends, 361 that's needs case split and piston and 5105 needing a coil.

 

[Mastermind]

Cool stuff guys.

Those old Pioneers are way cool Clint.

 

[KG441c]

Went back into this 026 to do alil more porting and squish setting

 

[woodeneye]

View attachment 360577 Went back into this 026 to do alil more porting and squish setting

Hey Keith, that's how I want mine to look once I'm done with her. Gettin my replacement airbrush today, UPS already delivered the paint, now I gotta wait on the slow FedEx truck or van to arrive. Can't wait! I'll probably clean parts and experiment with paint mixture today, then shoot tomorrow or over the weekend.

 

[fastLeo151]

couple of 261's and 362's(non mtronic) needing topends, 361 that's needs case split and piston and 5105 needing a coil.

Not bad for a guy that doesn't do 2strokes

 

[CJ1]

Right now, a Yamaha V150 carb set and soon to be a 200HPDI powerhead for some mods. Have not decided if the 150 or the 200 will go on the Allison XB2002. The other engine will go on a X19 Xpress. [on the boat now]. The 200HPDI will be over 300hp when it gets bolted back on, should be fun in a 440lb outboard. CJ

 

[cgraham1]

Cool stuff guys.

Those old Pioneers are way cool Clint.

Thank you sir! That 655 is a b***h to start with the decomp plugged.

That P60 has a new sdc and dual stage reeds, and I just got the open style filter rigged up. Plus a new bar and chain. The saw was free, but I've probably spent more than it's worth on parts to get it where it's at.

 

[jerbear]

just a 268xp that was pulled from the scrap pile
needs a cleaning and inspection fuel system worked over and some used plastics

 

[Mastermind]

The 2 series are all great IMHO.

My 262XP is my favorite 60cc saw at the moment.

 

[cgraham1]

My 262XP is my favorite 60cc saw at the moment.

I used to have a beautiful 262xp, but Steven wouldn't shut up about it, so I finally gave in and sold it to him.

Just picked up a 254xp, though.

 

[morewood]

You chainsaw goobers......Merc 90 4stroke with starting issues, two wood splitters that want some attention, a pistol that refuses to be taken apart, and enough of my wife's yard sale crap to fill the bed of my truck.....at least that stuff disappears Saturday.

Shea

 

[CJ1]

You chainsaw goobers......Merc 90 4stroke with starting issues, two wood splitters that want some attention, a pistol that refuses to be taken apart, and enough of my wife's yard sale crap to fill the bed of my truck.....at least that stuff disappears Saturday.

Shea

I kinda felt bad about posting on the outboards but hey he asked! I have way more fun with them than saws. CJ

 

[Mastermind]

No worries Joe. It's a what's on the bench thread ain't it?

 

[KG441c]

Right now, a Yamaha V150 carb set and soon to be a 200HPDI powerhead for some mods. Have not decided if the 150 or the 200 will go on the Allison XB2002. The other engine will go on a X19 Xpress. [on the boat now]. The 200HPDI will be over 300hp when it gets bolted back on, should be fun in a 440lb outboard. CJ

Oh wow!!! I love allison boats! I had a 20 bullet with a modified 260 mercury promax