"You Suck" Thread 2018--Pics required!

[RandyMac]

Yeah, it sucks.

 

[rocketnorton]

a100
for less than a bottle of my fav bourbon.
runs on squirt.

 

[rocketnorton]

lookin for any info-ipl, manual, etc, on this...
tia.

 

[smcrow]

This months grabs, #1 Husqvarna 272xp W/HD air filter, a little dirty but should clean up nice, fires on prime. $75, #2 Husqvarna 394xp W/HD air filter, was missing muffler and wrap handle, put a new muffler on it and fresh gas fired right up, waiting on new wrap handle, #3 Husqvarna 372xp X-Torq in parts $100 will need a complete rebuild from bearings up. All dollar amounts are what i paid for the saws

 

[Ms290man]

Picked up for $350:

Stihl 028 AV Super 16 inch
Stihl 026 16 inch
Stihl MS 170 14 inch
Stihl MS 201 TC M-Tronic 14 inch
Echo CS 670 24 inch
Echo CS 3450 16 inch
Echo CS 590 16 inch

Already got the 201t running. Does that qualify?

 

[KW83]

I picked this saw up at auction. It wasn't quite at "you suck" price. I did get 1 chain for it in a box lot with some other chains and electric chainsaw for $5 though. That sucked.

 

[cuinrearview]

I keep a boot tray in the trunk for dirty saws, I ran out of tray today. I think the 029 is the only runner, but it's sale alone will more than double my investment. The 044 is a bit of a contradiction. Very early 12mm serial number with a red lever and slant fin jug.

 

[president]

a100
for less than a bottle of my fav bourbon.
runs on squirt.

Hey Pete ,is that a husky 90?
if it is Dallas at Summerland Rentals husky,and stihl dealer
asked me to seek one out for him if its for sale
Keith

 

[rocketnorton]

it is a100, and has couple dibz already. a 90 would stay here.

 

[Brent Nowell]

how bout a mac 10-10 and a Husqvarna 372xp oe with case both run garage sale find $110 cash ...for both...said he take a little less if I bought both ..but I already felt like thief

Unreal what a score

Well sir

YOU SUCK

 

[82F100SWB]

In the new house and shop and halfway near organized. Yard sale time! Lol
$5 each. VI922, XL76, R30, 910EV. Couldn't leave them... Lol

 

[smcrow]

In the new house and shop and halfway near organized. Yard sale time! Lol
$5 each. VI922, XL76, R30, 910EV. Couldn't leave them... Lol

What model of Jonsered is that?

 

[82F100SWB]

Its looking to be a 910ev.

 

[smcrow]

Its looking to be a 910ev.

Nifty, if you decide it needs a new home let me know....lol

 

[Sphinxx]

Had a buddy of mine, after a few drinks lol, give me his stihl 038 mag. Says "couldn't get the ******* to run". Well new fuel line, filter and a pulse hose (cracked) and runs like a champ.

 

[president]

Had a buddy of mine, after a few drinks lol, give me his stihl 038 mag. Says "couldn't get the ******* to run". Well new fuel line, filter and a pulse hose (cracked) and runs like a champ.

wow, a score indeed!

 

[bigbadbob]

Had a buddy of mine, after a few drinks lol, give me his stihl 038 mag. Says "couldn't get the ******* to run". Well new fuel line, filter and a pulse hose (cracked) and runs like a champ.

You Canadians get all the good deals!!
Even on Canada Day!!

 

[mh9162013]

Got this (Echo CS-271T) for $80 at my local pawn shop (they had a 50% off sale). It needs a new air filter and chain catch, but besides that, I'll have to dig a little deeper to see what additional work it needs.

It took a few extra pulls to get it started, but seems to run fine. I have yet to inspect the piston or cut any wood with it, so we have yet to see how well I made out.

 

[rarefish383]

I've been wanting a Poulan XXV for a while now. Was at the weekly Tuesday auction this afternoon, and saw a little yellow saw up ahead. Thought it might be a Mini Mack. Got closer and I thought, "That's an XXV someone painted yellow. Then I saw the Sears on it. I knew Poulan made a lot of saws for Sears. I got it for $10. While I was waiting for the sheet of bids to get over to the office, I took it up to my truck. Dumped the old gas, put half tank in it, and a shot down the carb. The recoil was real loose, so after each pull I had to doodle with it to rewind. After 4-5 pulls it started up and ran great, idles, winds up. Happy camper. I got it home and wiped it off with a clean rag, took the recoil off and put about 6 turns on it and tightened the rope right up. Choked it twice, third pull fired right off. Oh, and the B&D folding work bench, got it for $10 too.

 

[cuinrearview]

I've been wanting a Poulan XXV for a while now. Was at the weekly Tuesday auction this afternoon, and saw a little yellow saw up ahead. Thought it might be a Mini Mack. Got closer and I thought, "That's an XXV someone painted yellow. Then I saw the Sears on it. I knew Poulan made a lot of saws for Sears. I got it for $10. While I was waiting for the sheet of bids to get over to the office, I took it up to my truck. Dumped the old gas, put half tank in it, and a shot down the carb. The recoil was real loose, so after each pull I had to doodle with it to rewind. After 4-5 pulls it started up and ran great, idles, winds up. Happy camper. I got it home and wiped it off with a clean rag, took the recoil off and put about 6 turns on it and tightened the rope right up. Choked it twice, third pull fired right off. Oh, and the B&D folding work bench, got it for $10 too.

The saw is cool Joe, but you SUCK on that bench!