Darnz
ArboristSite Lurker
You're definitely the suckiest sucker that sucked in 2019, congratulations and well done.
"You Suck" Thread 2019--Pics required!
- Thread starter dynodave
- Start date
Help Support Arborist Forum:
- Status
You're definitely the suckiest sucker that sucked in 2019, congratulations and well done.
Stem450Husky
Wombat Rancher
Hey Lad!!!!!twas a nice drive
Looks like a scored an end of the season suck.... Stihl HOS grinder for $121 plus shipping.
Hi guys haven't posted in quite a while...but have all important pix
My friend ED is now in a assisted living with parkinson's. His wife (POA) is clearing up his "residue" and had me take his saws and a few other things.
1957 Homelite EZ-6 17" 83cc seem to have compression. Brown carb but no "carb house" cover or cylinder head cover. air vane governor intact.
1993 Stihl 039 64cc 16' rusty bar and chain. I had gotten this running for Ed 4-5 years ago and last year he complained it did not run...after a few pulls I had it running, He could not pull it over... Now rusty chain on the bottom run and the chain was seized. I freed it up and it now runs. I was given some O-P-E stuff a few years ago with a few Stihl bars. I can finally use the 20" bar on this saw.
Homelite 33cc 12" bar, UT10734R He had bought this a long time ago at a hardware store for $10 since they had stolen the bar and chain for another customer and then sold the saw later at discount. Years ago I had it running and put the new bar and chain. Now starts and runs but only on 1/2 choke.
1960 Strunk Model G2E 24" US Army contract 120VAC electric chainsaw. 1/2" pitch chain looks new.
1951 Mall 12A 84cc 18" Pull over and seems like has some compression.
My friend ED is now in a assisted living with parkinson's. His wife (POA) is clearing up his "residue" and had me take his saws and a few other things.
1957 Homelite EZ-6 17" 83cc seem to have compression. Brown carb but no "carb house" cover or cylinder head cover. air vane governor intact.
1993 Stihl 039 64cc 16' rusty bar and chain. I had gotten this running for Ed 4-5 years ago and last year he complained it did not run...after a few pulls I had it running, He could not pull it over... Now rusty chain on the bottom run and the chain was seized. I freed it up and it now runs. I was given some O-P-E stuff a few years ago with a few Stihl bars. I can finally use the 20" bar on this saw.
Homelite 33cc 12" bar, UT10734R He had bought this a long time ago at a hardware store for $10 since they had stolen the bar and chain for another customer and then sold the saw later at discount. Years ago I had it running and put the new bar and chain. Now starts and runs but only on 1/2 choke.
1960 Strunk Model G2E 24" US Army contract 120VAC electric chainsaw. 1/2" pitch chain looks new.
1951 Mall 12A 84cc 18" Pull over and seems like has some compression.
@Cat 525 Strunk...
Picked this up today!
Spend a total of $30aud at the local swapmeet this morning.
Mac CP70 and 36" Stihl mount bar.
Mac CP70 and 36" Stihl mount bar.
LonestarStihl
Addicted to ArboristSite
You suck!
Most of you probably read that I broke my 075's manual oiler button right after I got it. Well, a neighbor heard of my plight and responded with an amazing gift: That's right, a billet aluminum button 
Now I'll never have to worry about that stupid thing again.
Now I'll never have to worry about that stupid thing again.
$100 for both of these N.I.B. bars and a helper handle. They came from a friend of @rupedoggy, a man who had a dozen 090s, including an 090G.
I run a 24" on one of my Super 1050's?
I used tire wet from turtle wax to put the bushings in my 028 , works better than beating them in.
My newest find, Jonsereds 70E. I posted a svc manual request already so hopefully someone has one.
I rebuilt the carb w/ OEM Tillotson kit and replaced the fuel line and vent tube.
Runs nice and strong.
P&C were pristine too.
Homelite collector in training [emoji879]
I rebuilt the carb w/ OEM Tillotson kit and replaced the fuel line and vent tube.
Runs nice and strong.
P&C were pristine too.
Homelite collector in training [emoji879]
Last week i picked up 3 old saws, two Lombards and one David Bradley. I left the Lombards in WV, will get pics of them this weekend. Here's the "Kee Line", David Bradley. It has a Power Products engine, and matches up to the Craftsman model 917.61407. Looks like it's the 95CC AH-58 engine. Got all 3 for $22.50.
Nice!
Got a you suck deal today! Freeby from my dealer! Has a scored p/c.
cuinrearview
Red saw lover
Trade ya for a mufflerGot a you suck deal today! Freeby from my dealer! Has a scored p/c.
cuinrearview
Red saw lover
I'll just leave this here
- Status
