Post your best saw scores under $100

[Duke Thieroff]

Caught a deal today on an 032 AV which I suspect may need some carby work.


$60 bucks

And the $50 041AV

Also picked up a Jonsered 2149T for $70 too.

CAD, WTF?:chainsawguy:

 

[Dan_IN_MN]

Nice find!

Oh.....All of the saws in my sig were under $100.00 each! :biggrinbounce2: :chainsawguy:

 

[Duke Thieroff]

Nice find!

Oh.....All of the saws in my sig were under $100.00 each! :biggrinbounce2: :chainsawguy:

Me too
CT

 

[Bob Wright]

All of my sig saws were under 100 bucks except the CS-802 i just bought and my CS-60S that is new in the box. All of the rest 100 or under...Bob

 

[mbayer]

got my pro mac 850 for 40 bucks in running coditoin never did anything to it run it all the time

 

[roncoinc]

Out of the last 200 or so i havent paid more than $45 for a used saw except for one.
the $45 one was this one.with a new B&C..

$10 for this one.

ETC......etc....etc.....

 

[Frank Boyer]

I picked up a 036 in good condition and a 1-86 with 36" and 72" bars and many extra chains for under $100 each. The 036 needed cleaning up, a carb adjust, and the chain sharpened. The 1-86 had the starter rope hanging and needed a carb kit.

 

[Duke Thieroff]

Out of the last 200 or so i havent paid more than $45 for a used saw except for one.
the $45 one was this one.with a new B&C..

$10 for this one.

ETC......etc....etc.....

I like your 041


CT

 

[jerryw66]

Free 044, just needed piston, rings, and a few missing nuts and bolts, even came with a good 32" bar and chain, love it more because it didn't cost me much.

 

[Rodbuster22]

I bought an Stihl 066 for $65.

So far it has needed a piston & cylinder, brake handle, drive sprocket bearing and maybe a couple of other things.

 

[Rounder]

Does free also count?....Mac 1-43/250/450, Sachs 117/133, Stihl 360/ 440X3/056, Jred 910 - Sam

 

[Frank Boyer]

I picked up a 036 in good condition and a 1-86 with 36" and 72" bars and many extra chains for under $100 each. The 036 needed cleaning up, a carb adjust, and the chain sharpened. The 1-86 had the starter rope hanging and needed a carb kit.

I forgot about a $25 024. The saw needed cleaning up and a bar and chain. My wife and daughters came with me to look at the saw (read very strange) and welcomed the saw to the family with a $175 diner.

 

[powerking]

All mine have been under $80!! Even the 254, that cost me $30, only needed a "fuel change" and she was good to go!! Now she breathes even better than before!!
Rich
This is getting addicting!!:kilt:

 

[alderman]

Here's a couple of mine for less than $100.

 

[andrethegiant70]

I bought an 066 red light (complete) for $80, and found an 044 for $50. Both have great compression and the 044 came with a 24in bar in good shape and near-new chain. I haven't really looked at the 066 yet, and so far, the 044 seems to just need seals. Both are VERY dirty, but I'm counting my lucky stars on those 2 beauts.

Course, I've gotten a few marginal deals also.

The best deal I ever got, though, was buying out a small engine company's pile of junk. There was a lot of work there, but what with some elbow grease and EBAY, I built up 3 272s, 3 372s, a few other misc Huskies, a couple Dolmars, a few 029s and 025s, and I sold a lot of parts. Oh, I also have quite a few project saws on the shelves for a few years to come. Yes, A fair bit of coin, but the fun!!

The infusion of knowledge has been GREAT. I've gotten pretty good with the big Huskies and homeowner Stihls (I'm only just "coming along" on the pro Stihls), so I am able to participate in many of the technical discussions. For me, AS has been a lot more fun because of it.

 

[ckelp]

dose (6) 136 saws for $20 count?
or how about a 272 XP $50

 

[pioneerguy600]

Anybody remember this one?...hint.. It does not run right.

Pioneerguy600

 

[brian660]

never bought a saw for under 100$ but I got a medium sized moving boxfull of 070, 090 and 084 parts for 50$ once, i`ve sold some, used some and still have some parts left.

 

[pioneerguy600]

Or these two and a line trimmer for $100.

I better stop now as I have gotten over a hundred saws for free or less than $25.
Pioneerguy600

 

[BobL]

an almost seized 066 - price was $0.