661 Oil Test 32:1 vs 40:1 vs 50:1 ?

[cuttinties]

Somebody a page back ask. I wouldnt use any of these oils in a hotsaw. [emoji38]

They don't mix so well with methanol [emoji41]

 

[RedneckChainsawRepair]

Race or work 1 oil for me Klotz KL-200. If you run alky race or work with ethanol gas. Stays mixed no separation I have ever seen yet.

http://www.klotzlube.com/ecommerce/CatalogSearch.aspx?Searchstr=kl-200&SCID=-1

 

[cuttinties]

Race or work 1 oil for me Klotz KL-200. If you run alky race or work with ethanol gas. Stays mixed no separation I have ever seen yet.

http://www.klotzlube.com/ecommerce/CatalogSearch.aspx?Searchstr=kl-200&SCID=-1

And it smells good.




Note kids please don't sniff the methanol or the nitromethane.............it's not exactly healthy[emoji16]

 

[mdavlee]

Race or work 1 oil for me Klotz KL-200. If you run alky race or work with ethanol gas. Stays mixed no separation I have ever seen yet.

http://www.klotzlube.com/ecommerce/CatalogSearch.aspx?Searchstr=kl-200&SCID=-1

I think I'm about done chasing oils. Be back to KL 200 soon. I have a partial quart of k2 and partial quart of 800. I have some super here just to run and smell.

 

[sunfish]

 

[Andyshine77]

VP Racing use Motul 710 in their 2-cycle premix cans w/94 octane best I remember. That oil has a very similar viscosity as Stihl HP Ultra at 100C. It's actually cheaper than the Stihl premix cans with hp ultra.

They use a version of 800 in their 50:1 fuel and 710 in the 40:1 fuel. I have both and the smell between the two are very distinct.

 

[Hedgerow]

What oil is used in tru-fuel??

I always wondered..

It smells unique..

 

[wigglesworth]

What oil is used in tru-fuel??

I always wondered..

It smells unique..

 

[Andyshine77]

Most of them have very little run time on them as they are hobbyists.
And expiereance AS members. I have been here longer than most on this thread and have more expiereance with all kinds of two cycles to boot.

You've said nothing definitive, you've backtracked and said this analysis has errors, yet you didn't say what.https://docs.google.com/spreadsheet...DF3QVJLeDRrbExmSGhsc1FlWFdueHc&hl=en_US#gid=0

You have knowledge that is not in question, but I'm not sure you understand it fully, which is why they're so many holes in your responses. To me you come off a bit like ST. You rely on what you read and base your conclusions on this and state it as fact, which it is not not.

I've ran a few different oils as well. Most of the mix I use every year is in my blowers and trimmers however. I've never seen rust, and many of my saws sit a year at a time, never had any carbon issues " other than Klotz SuperTech", never had oil separate. This is why I often simply suggest running any of the trusted brands that are available locally. Some of us like to try different oils just because.

Take your pick. Brad if you want to buy some of what you see in the pic, just let me know. I think I have enough 2T oil for the next 5 years or so.

 

[KG441c]

You you've said nothing definitive, you've backtracked and said this analysis has errors, yet you didn't say what.https://docs.google.com/spreadsheet...DF3QVJLeDRrbExmSGhsc1FlWFdueHc&hl=en_US#gid=0

You have knowledge that is not in question, but I'm not sure you understand it fully, which is why they're so many holes in your responses. To me you come off a bit like ST. You rely on what you read and base your conclusions on this and state it as fact, which it is not not.

I've ran a few different oils as well. Most of the mix I use every year is in my blowers and trimmers however. I've never seen rust, and many of my saws sit a year at a time, never had any carbon issues " other than Klotz SuperTech", never had oil separate. This is why I often simply suggest running any of the trusted brands that are available locally. Some of us like to try different oils just because.

Take your pick. Brad if you want to buy some of what you see in the pic, just let me know. I think I have enough 2T oil for the next 5 years or so.

View attachment 418665

Andre how do u like the r50?

 

[KenJax Tree]

I can take a pic like that too Andre[emoji3] i have way too much oil

 

[Andyshine77]

Love it!! I saw almost zero wear with R50.

 

[Andyshine77]

I can take a pic like that too Andre[emoji3] i have way too much oil

I have issues.

 

[KG441c]

Love it!! I saw almost zero wear with R50.

Mdavlee said the same.

 

[Andyshine77]

What oil is used in tru-fuel??

I always wondered..

It smells unique..

Oops I was talking about TrueFuel, but if I remember correctly VP uses the same oil.

 

[CR500]

That is how my oil "stock" looks as well lol.
Yes we have issues. Kind of want another bike so I can study on a bigger scale.

Was never into this oil studying until recently, shame I have no bike.

Big fan of R50 Andre I take it? Lol

Nothing more reassuring than oil clinging to a skirt like the pic you posted. Bet the crankcase looked pleasing....
Sent from my non internal combustion device.

 

[Andyshine77]

Okay I was wrong. We have issues.

 

[Mastermind]

I when and crawled in a sweatlodge, with some good friends and some very hot rocks.

Oil......meh.

 

[blsnelling]

Okay I was wrong. We have issues.

I'm right there with you. I used most all of those oils as well. Me likes oil, lol.

 

[Hedgerow]

Koala squeezin's???!!!



Won't let any of dat **** near my saws from now on...