Homelite Chainsaws

[Modifiedmark]

What is a good Oregon number for a spur sprocket drum for a Super EZ? Six or seven tooth don't matter to me.

Got an evilbay runner but the spur has torn loose from the drum.

Must have been a poor furnace braze.

Carl.

30432X for a spur and 30672X for the rim and drum.

 

[chainsawwhisperer]

Homelite 410

I got this beauty last week... unfortunately it was run with a bad intake boot and slightly scored the piston I am pretty sure the cylinder will clean up.
Does anyone have a piston and or cylinder for one of these?
please let me know.
jim

 

[67L36Driver]

30432X for a spur and 30672X for the rim and drum.

Thanks Mark.

Ms. Wilson is going to fix me up.

May try welding it just for grins. Been a long while since I used my Lincoln cracker box.........................................................

 

[lesorubcheek]

I got this beauty last week... unfortunately it was run with a bad intake boot and slightly scored the piston I am pretty sure the cylinder will clean up.
Does anyone have a piston and or cylinder for one of these?
please let me know.
jim

Jim that's a nice 410. Looks like an SL with the brake. Ya don't see these too often. Great find!

Dan

 

[jerrycmorrow]

I got this beauty last week... unfortunately it was run with a bad intake boot and slightly scored the piston I am pretty sure the cylinder will clean up.
Does anyone have a piston and or cylinder for one of these?
please let me know.
jim

i got one needs the boot too. sure be curious as to how replacing it compares to the 330 boot. that is, before i do it. that would be a good pix tutorial dontchathink? btw, looks like your paint is as faded as mine. got any ideas how to perk it up?

 

[sawnami]

I got this beauty last week... unfortunately it was run with a bad intake boot and slightly scored the piston I am pretty sure the cylinder will clean up.
Does anyone have a piston and or cylinder for one of these?
please let me know.
jim

Very nice. I like the lines of those model saws.

 

[chainsawwhisperer]

i got one needs the boot too. sure be curious as to how replacing it compares to the 330 boot. that is, before i do it. that would be a good pix tutorial dontchathink? btw, looks like your paint is as faded as mine. got any ideas how to perk it up?

The paint is fine, the camera on my phone is fading.. lol

Anyone have a piston??

 

[Eccentric]

Jim any luck with the fellow I referred you to? I've seen several NOS pistons for these saws on feebay too. They are still common because that engine was also used in the DM40 demo saw.

 

[chainsawwhisperer]

Jim any luck with the fellow I referred you to? I've seen several NOS pistons for these saws on feebay too. They are still common because that engine was also used in the DM40 demo saw.

Yes, I spoke to him and yes I think he can help! He has another 410 coming from ebay and wants to see what it needs first.
I have not seen those pistons go across ebay, but I just started looking earlier this week.
Thanks Aaron!

BTW, do you know anything about the Homelite MP38 saw? It looks like a chainsaw but I can't figure out what it's based on. I thought it close to the 340 saw, but the 340 is a clamshell.??
jim

 

[Warped5]

Yes, I spoke to him and yes I think he can help! He has another 410 coming from ebay and wants to see what it needs first.
I have not seen those pistons go across ebay, but I just started looking earlier this week.
Thanks Aaron!

BTW, do you know anything about the Homelite MP38 saw? It looks like a chainsaw but I can't figure out what it's based on. I thought it close to the 340 saw, but the 340 is a clamshell.??
jim

Hi Jim - Can you post a pic of that MP38?

 

[jerrycmorrow]

The paint is fine, the camera on my phone is fading.. lol

Anyone have a piston??

pm sent

 

[Eccentric]

Yes, I spoke to him and yes I think he can help! He has another 410 coming from ebay and wants to see what it needs first.
I have not seen those pistons go across ebay, but I just started looking earlier this week.
Thanks Aaron!

BTW, do you know anything about the Homelite MP38 saw? It looks like a chainsaw but I can't figure out what it's based on. I thought it close to the 340 saw, but the 340 is a clamshell.??
jim

I think it is based on the 340 type chainsaws. Never seen one in person or looked at an IPL for them.

 

[Eccentric]

I think it is based on the 340 type chainsaws. Never seen one in person or looked at an IPL for them.

Meant to say I've never seen an MP38 in person or looked at an IPL for one. I have seen/handled a 340 chainsaw however. Haven't ran a 340 though.

 

[Eccentric]

What am I by myself here? Come on guys. Help me keep the ERB and his MacAttack pics at bay. POST SOMETHING. I see that Randy Duncan once again has his newly produced Homelite 650/750 intake boots for sale. I was impressed with the quality of the one I used on a 750 a year or two ago.:msp_thumbup:

 

[lesorubcheek]

What am I by myself here? Come on guys. Help me keep the ERB and his MacAttack pics at bay. POST SOMETHING. I see that Randy Duncan once again has his newly produced Homelite 650/750 intake boots for sale. I was impressed with the quality of the one I used on a 750 a year or two ago.:msp_thumbup:

Here's something. Anybody ever look inside a 7-29 fuel tank? Here's what they look like.

Dan

 

[Warped5]

What am I by myself here?

Ummmm ... you don't bathe? :jester:

 

[Eccentric]

Ummmm ... you don't bathe? :jester:

Doesn't seem to keep people out of the McCulloch and Poulan threads......

 

[homelitejim]

View attachment 312306

 

[Mr. Bow Saw]

I got this saw a few years ago. Did not do anything with until now.

 

[Mr. Bow Saw]

I put it on the bunch to see what it would take to get it running. It has no spark and the
plug end of the wire is missing. I checked the compression and its around 150 psi.
Piston looks good from what I can see. Lots of crud built up inside.