Jonsered 2172

[DUGs-sawshop]

Just ordered some 2172's in . Were asking $819 w/24" bar. Cant wait to take a look at them.

 

[mark360T]

i was asked by my dealer if i wanted a total bar for the 2172, but he only has 18 and 20in lengths

 

[chainsman1]

The red version of the NE346xp is the 2153 - it has been out for a few years!

but the 2153 number is not good for people dont know,they will think it is a 53cc. it would just be nice to call it 490

 

[MacLaren]

but the 2153 number is not good for people dont know,they will think it is a 53cc. it would just be nice to call it 490

why not the cs 2150c then?

 

[SawTroll]

why not the cs 2150c then?

That number is taken (except the c) by a non-pro saw.

 

[MacLaren]

I've got two 930 Supers that are A and A+ condition. Very nice saws, with gobs of low end. Won't be parting with either of those babies.

Lol!! I would think not!! I bet they are somethin else!

 

[Chris J.]

I've got two 930 Supers that are A and A+ condition. Very nice saws, with gobs of low end. Won't be parting with either of those babies.

Several years ago there was an eBay auction where George Blake/motorsag (some consider him to be the Jonsered guru) listed a 930 that he had rebuilt. I really wanted that saw, but wasn't home the afternoon the auction ended .

 

[rexbob]

Just bought one yesterday for 702 out the door.Great power .Vibe (relatively)low.
Price 702 out the door w/20 inch bar.

 

[J.Walker]

Follow the KISS rule - just buy a 372xp or xpw, while you still can!

What is the KISS rule?






.

 

[SawTroll]

What is the KISS rule?






.

"Keep It Simple, Stupid"

 

[J.Walker]

"Keep It Simple, Stupid"

Oh that was a long time ago, before I came here.

When I only had one chainsaw! :msp_cool:



.

 

[hamish]

Oh that was a long time ago, before I came here.

When I only had one chainsaw! :msp_cool:



.

I still consider it as adhearing tot he KISS principle.........as all my saws use the same fuel mix!

Now all you have to do is follow the 7 p's.

 

[SawTroll]

I find the add-on heated handles interesting.
I wonder if they will fit other/older models?....................

It says add-on package, but also built in heated handles - I guess it really is just a reference to the WH option? :msp_unsure:

 

[SawTroll]

Oh that was a long time ago, before I came here.

When I only had one chainsaw! :msp_cool:



.

:hmm3grin2orange::hmm3grin2orange:

 

[SawTroll]

Specs are on page 37 here.

The OM show 3 models: 2166, 2172 and 2172WH.

 

[MR.STIHL036]

Just ordered some 2172's in . Were asking $819 w/24" bar. Cant wait to take a look at them.

That seams like a good deal i might take you up on that i live in oxford maine right now. :msp_w00t:

 

[daniel stroud]

GREAT REVIEW! I looked at buying one today. I just cant decide between that and a husqvarna I know that husqvarna owns jonsered but the seller explained that there are sum diff in the jonsered and husqvarna saws. The main thing im looking for is a bigger saw round this size and one that I can throw in a piece of hard wood like hickory or oak and it will rip through it with no bog down or loss of torq. So if yall can tell me if theres any diff in the cutting torq between these two saws it wuld be nice. thanks

 

[SawTroll]

GREAT REVIEW! I looked at buying one today. I just cant decide between that and a husqvarna I know that husqvarna owns jonsered but the seller explained that there are sum diff in the jonsered and husqvarna saws. The main thing im looking for is a bigger saw round this size and one that I can throw in a piece of hard wood like hickory or oak and it will rip through it with no bog down or loss of torq. So if yall can tell me if theres any diff in the cutting torq between these two saws it wuld be nice. thanks

The handlebar angle and some plastic covers are different.

 

[tallguys]

I still consider it as adhearing tot he KISS principle.........as all my saws use the same fuel mix!

Now all you have to do is follow the 7 p's.

7p's?

 

[weimedog]

Got a 2172 from Spike60 yesterday...been wanting to get one for a while! One thing Spike60 mentioned and I had three long hours to think about was how the discussion over the last couple of years relative to X-torq and the future was a horrible thing. Maybe the 575 poisoned the waters...but still the conventional reasoning (If you call this place conventional!) was grab all the old 372's 460's etc before those horrible X-torq Strato Charged morphidite's clog the sales streams!

Spike brought a early version of a 562 and 372XP last year, maybe even the year before my memory is fogged; to a GTG and they were BOTH excellent. I've had time on an X-torq 372 and I think they are every bit as good as the old ones if not even better. I've also had a little time running the Jonsered CS-2172...like the look and ergo's better so when it came time to put the bucks where the heart was...well...a CS-2172 is in the house. Almost too pretty to work.:msp_unsure:

PS: Things look good for the future of saws if these X-torq's & the others I have run are any indication!

PS: Never hear about the 7P's...but heard about the Three P's to a successful marriage once....Provide, Protect, Procreate! Better do ALL well...and continuously!