TheStihlSlinger
ArboristSite Lurker
Yes to the sugar maple in my avatar. They get big around here.Does it have the reg plug or the new smaller plug?
Not sure on the plug size. I’ll check in a couple hours when I get home.
Yes to the sugar maple in my avatar. They get big around here.Does it have the reg plug or the new smaller plug?
If the small plug you need an adapter hose or different tester.Yes to the sugar maple in my avatar. They get big around here.
Not sure on the plug size. I’ll check in a couple hours when I get home.
Mine is the small plug.If the small plug you need an adapter hose or different tester.
Do you have a gauge to fit that?Mine is the small plug.
NGK CMR6H
No I don’t have the right gauge.Do you have a gauge to fit that?
I bet is is way up.No I don’t have the right gauge.
The compression is high enough to suspend the weight of the saw full of fuel and oil with a 25” bar and chain off the pull cord. I realize that isn’t very accurate but I would think it has to be at least 150 or more to resist that much gravity
I would pull the damn muffler!
I will go get he phone number!Well there is that.
I would also be asking to chat with someone from Corp.
.
I wish you would pull the muffler!!!!!!!!! Maybe it can be fixed cheaply! They are going to screw you good on trade!!!!!! Send me the damn thing and I will look at it and fix it free labor plus parts and shipping. Stop dealing with them car salesman!I'm pretty upset with this saw situation. So here's the deal, I'm over the 7 days so there is nothing the dealer I purchase the saw from can do. They told me my saw is fine, they ran it... all Stihl saws are like my saw period! All of Stihl NEW saws are 110psi on compression. They do not want to sell me another saw nor do they want my saw as a trade-in. Best they can do is call Stihl and forward my complaint and give them my information. They said my chain is aggressive, I said it's a 15" fir log and a 60cc saw it shouldn't be stopping in a cut, even with 20" bar and fresh never ran chain they ground. I asked why did they sell me a 25" bar with a FC chain if this saw won't run it...Nope...my saw is fine, they'll call Stihl...nothing they can do! I'm not a person that get upset easy...I was pretty hoping mad when I left. They acted like I'm don't know what I'm talking about or I have unreal expectation about this saw. They weren't mean about it... just plain blunt on the fact they aren't going to do anything but forward my information to Stihl and that I can deal with Stihl. It's dangerous as fall saw ...nope they think its just fine that it and I left. They would not admit the saw was stopping on them too.
So, I had about 25 mile on the drive home to cool off and I went into the 2nd shop and talk to the guy that worked on my saw. I asked him I just want out of this saw, he ran it and knows the saw...I don't want to deal with it anymore, what can he do as a trade-in on 462. He said the owner was out but he'd talk to him in the morning and see what they could do. I hope...I'm just out of this mess...so disappointed in this MS362. I felt a lot better after I left the 2nd shop. I not want 462 but I think that the best I can do on this situation...its a lot more saw then I need. He did say he's ran the new 462 and it runs hot won't slow down or stop in the cut. So if they will trade, I'll have them put my bar on it, pay what I have too... take the cut on this now used saw. I'll have the saw shop cut with the saw before I leave. Then I'm going to cut with it when I get home and hopeful I'm out of this MS362 ...guess I'm going see how much it going hurt to get out of this saw tomorrow. Hopeful I can get close to $600 out of the power head, I paid $839.95 for it with the bar and chain. But I think I'll be lucky to get that much, they would have to sell it as a used saw. I'm not sure how much time is on the hour meter now, but its less than 90 mins that for sure.
I guess Stihl will eventually call me at some point. I sure have some questions for them. I was just put to much faith in the Stihl product never dreamed this would be anything like this. Lesson learn if you buy a Stihl saw, make sure you run it right away, take it back in less than 7 days....the earlier the better. Don't let the shop tell you to take it home and run it some more. Don't put any add-on other than what on the receipt. Make sure they test the saw and fuel it full before you leave, I wouldn't put a drop of fuel it if you think there's a problem...take it back.
Good money after bad while the saw is still under warranty? It would likely run $200 to get it done, bad idea.
Looks like hes gonna spend the extra anyways. I was just offering another option lol.I'm pretty upset with this saw situation. So here's the deal, I'm over the 7 days so there is nothing the dealer I purchase the saw from can do. They told me my saw is fine, they ran it... all Stihl saws are like my saw period! All of Stihl NEW saws are 110psi on compression. They do not want to sell me another saw nor do they want my saw as a trade-in. Best they can do is call Stihl and forward my complaint and give them my information. They said my chain is aggressive, I said it's a 15" fir log and a 60cc saw it shouldn't be stopping in a cut, even with 20" bar and fresh never ran chain they ground. I asked why did they sell me a 25" bar with a FC chain if this saw won't run it...Nope...my saw is fine, they'll call Stihl...nothing they can do! I'm not a person that get upset easy...I was pretty hoping mad when I left. They acted like I'm don't know what I'm talking about or I have unreal expectation about this saw. They weren't mean about it... just plain blunt on the fact they aren't going to do anything but forward my information to Stihl and that I can deal with Stihl. It's dangerous as fall saw ...nope they think its just fine that it and I left. They would not admit the saw was stopping on them too.
So, I had about 25 mile on the drive home to cool off and I went into the 2nd shop and talk to the guy that worked on my saw. I asked him I just want out of this saw, he ran it and knows the saw...I don't want to deal with it anymore, what can he do as a trade-in on 462. He said the owner was out but he'd talk to him in the morning and see what they could do. I hope...I'm just out of this mess...so disappointed in this MS362. I felt a lot better after I left the 2nd shop. I not want 462 but I think that the best I can do on this situation...its a lot more saw then I need. He did say he's ran the new 462 and it runs hot won't slow down or stop in the cut. So if they will trade, I'll have them put my bar on it, pay what I have too... take the cut on this now used saw. I'll have the saw shop cut with the saw before I leave. Then I'm going to cut with it when I get home and hopeful I'm out of this MS362 ...guess I'm going see how much it going hurt to get out of this saw tomorrow. Hopeful I can get close to $600 out of the power head, I paid $839.95 for it with the bar and chain. But I think I'll be lucky to get that much, they would have to sell it as a used saw. I'm not sure how much time is on the hour meter now, but its less than 90 mins that for sure.
I guess Stihl will eventually call me at some point. I sure have some questions for them. I was just put to much faith in the Stihl product never dreamed this would be anything like this. Lesson learn if you buy a Stihl saw, make sure you run it right away, take it back in less than 7 days....the earlier the better. Don't let the shop tell you to take it home and run it some more. Don't put any add-on other than what on the receipt. Make sure they test the saw and fuel it full before you leave, I wouldn't put a drop of fuel it if you think there's a problem...take it back.
I use a snap on gauge with the ten mil adapter hose! And you have to make sure the proper Scraeder valve is in that! I bought it new and had to change it! But now it works great.Since there has been a lot of discussion on compression, what is the proper adapter for these smaller spark plugs? I need one that has the schrader at the end of what screws into the spark plug hole. The one i have is an "empty adaptor" into the spark plug hole and then the schrader is on the hose that screws into that, so it won't read accurate due to the added air volume inside the adapter, which is also shorter than the spark plug so is already adding some volume to the combustion chamber.
If he did bring it back with in 7 days I suppose they are going to say he didn't ask for the satisfaction guarantee and to be rid of it! But great point to make to Stihl USA.I don’t get this entire thing.
You did bring it back within 7 days. You were told it was “fine”. AFAIC, you are within the period and you were convinced not to return it.
I’m fairly certain that Stihl wouldn’t want this terrible publicity on there heads. I hope you did call them, an email with this link would be even better.
I haven’t gone back, but I recall you saying it wasn’t any better than your 034. Looks like it beat your 034 through that 16” log though. Also, I see you’re out west, but why would your dealer install a 25” bar on a 58cc saw? That’s 70-80cc territory out here.
Too bad you’re across the country. Shipping to me would be north of $100 round trip.
Enter your email address to join: