McCulloch Chain Saws

[OREGONLOGGER]

Back from the races took 2nd in the over 100cc class with my Super 797 got beat in the finals by a sweet running SP 125C. All sorts of big saws and Mac took first and second. There lucky my leeha block is not finished yet. .404 on a 123cc good running Mac you will not beat on a 20" log..

Cascade Saw

 

[leeha]

Back from the races took 2nd in the over 100cc class with my Super 797 got beat in the finals by a sweet running SP 125C. All sorts of big saws and Mac took first and second. There lucky my leeha block is not finished yet. .404 on a 123cc good running Mac you will not beat on a 20" log..

Cascade Saw

Come on Terry, Git that 797 together.
Glad ya took a second home.

How's it goin on the other coast over there.



Lee

 

[joeymt33]

I started on David's (broncoRN) sp80 today. thanks for the parts Fraser.

I cleaned up the ports and the casting marks on most of the pieces. It won't be a Leeha saw, but it will be nice for a southern boy.

 

[joeymt33]

After sand blasting, I did get one coat of paint on.

 

[Ambull]

This is my other GM "turd" lol.

 

[Mastermind]

This is my other GM "turd" lol.

Very straight body on that classic.

 

[promac850]

This is my other GM "turd" lol.

That one ain't no turd... good to know you have a great back up.

Seriously, that is one nice truck...

 

[Warped5]

VERY nice truck, JP!

 

[GrizzlyAdams86]

Today visiting the local shop I looked over the used saws while the owner talked on the phone. And there sits a PM800 on the shelf in amongst a bunch of smaller stihls for $100. More want than need and I just got 4 more saws last week, only wanted 1 of them...so anybody want a pair of doorstop homelite 150's and a running wild thingy? (it comes with a case!)

 

[Eccentric]

You MUST go pick up that $100 PM800 ASAP. Your PM700 demands it. To hell with those 150's and the WT. Sell those pieces of #### on feebay...

 

[leeha]

This is my other GM "turd" lol.

Hope ya got a big block in that turd to match them's big saws you got.


Sweet ride JP



Lee

 

[rwoods]

Its dangerous to use "PM800" and "$100" in the same sentence on this thread. Go get that saw before some saw detective finds it. :msp_smile: Ron

 

[paccity]

I started on David's (broncoRN) sp80 today. thanks for the parts Fraser.

I cleaned up the ports and the casting marks on most of the pieces. It won't be a Leeha saw, but it will be nice for a southern boy.

joey. is the cyl and piston ok in that? had good comp . all i could see was a couple minor scratches .

 

[joeymt33]

joey. is the cyl and piston ok in that? had good comp . all i could see was a couple minor scratches .

everything looks great, i think even the rings are good to reuse. david has bought some new ones since we are this far into it. i haven't measured the ring end gap on the old ones. anyone know what it should be?

 

[joeymt33]

i finally got around to putting a 20" bar and .404 chain on one of the sp81's. this one is running a 8 tooth sprocket. the wood is very hard. this is hickory from 2011 spring tornadoes so its over a year old. i really like this combo, it cuts great. i will be using this saw alot.


[video=youtube;WNpjutdEpxw]http://www.youtube.com/watch?v=WNpjutdEpxw[/video]

David, don't worry. i'll get to working on yours again someday.

 

[rwoods]

Joey, nice set up on the SP81. Ron

 

[joeymt33]

Joey, nice set up on the SP81. Ron

Thanks

It will actually be practical, which is something I don't do very often. Cutting up downed and drug around logs will be this saws purpose.

I may just need to get a semi chisel chain for more life

 

[joeymt33]

For those interested in the bearing differences between 82cc macs and the other 10-series.

 

[joeymt33]

The 82cc also has a larger crank.

 

[joeymt33]

i guess i'm the only one awake with the yellow fever tonight. i assembled david's SP80 this evening and ran it for about 60 seconds. then i attempted to do a compression test. with the decomp pushed in, it acheived 150PSI!. then i tried with the decomp out and now i think i need shoulder surgery. i got it to almost 210psi before i give up. i'll break in the new rings in the next couple of days with some 32:1 mix. after a couple tanks i'll test it again and see where it falls. this saw has alot more compression than any of my 82cc macs, i'm a little jealous.