Overtrained
Not crazy, Stoopid!
Im always too timid on the High screw, eff it i have a bunch of these saws if one is going to blow
McCulloch Mini and Small CC Chainsaw's
- Thread starter Overtrained
- Start date
Help Support Arborist Forum:
looks and sounds great, but don't you have a bigger stick to test that on?lol:tongue2::jester:
Overtrained
Not crazy, Stoopid!
Lol thanks..... It was the only lose stick on the bottom of the wood pile. It has a tarp bungee corded to death wrapped around all the wood, didnt want to be bothered so I used the girlie stick
Lol thanks..... It was the only lose stick on the bottom of the wood pile. It has a tarp bungee corded to death wrapped around all the wood, didnt want to be bothered so I used the girlie stick
oh well i would have done the same.hehe
Magnumfloyd
ArboristSite Operative
Glad it works for ya the mm runs great I just need a throttle rod and a new trigger if ya can help me out
ChainLightning
Vintage Saw Stalker
Got it done
got a clutch, sprocket, and bar and chain for it today. Runs good.
View attachment 277025
got a clutch, sprocket, and bar and chain for it today. Runs good.
View attachment 277025
Overtrained
Not crazy, Stoopid!
I will check the inventory monday for ya:msp_thumbsup:
Overtrained
Not crazy, Stoopid!
Post a vid!
ChainLightning
Vintage Saw Stalker
I might have to do that someday. Speaking of video's, heres one of my favorite ones that I made.
[video=youtube;EtOmgc9eIlY]http://www.youtube.com/watch?v=EtOmgc9eIlY[/video]
Overtrained
Not crazy, Stoopid!
Nice saw, old school homie. Kind of reminds me of the MAC 15 of the day. Hows the AV on that baby?
Fired it up
OK The wife is out to church so I tried to fire this up with fuel down the carb, no go.
I pulled the muffler and put some fuel into the cylinder and off she went, but too fast. Tried to adjust h & l but didn't seem to have any effect. Both h & l are out about 1 turn each.
After it started it would run with fuel down the carb but again too fast, idle adjust screw not touching the throttle lever . Might this be an air leak?
I will get around to photos. This one is a Mastercraft (Canadian Tire) version in a pleasant yellow with chain brake and anti-vibe. Came with a 16" B&C nearly new bar and a nearly new crap 91 safety chain with the big fins.
Regards,
Lee
-22 C this morning!
I just picked up one of these for $10.00 compression is 170psi haven't tried to start it yet far too cold outside and the wife objects to running saws indoors! More news and photos later. new clutch, bar and chain!!
Regards,
Lee
OK The wife is out to church so I tried to fire this up with fuel down the carb, no go.
I pulled the muffler and put some fuel into the cylinder and off she went, but too fast. Tried to adjust h & l but didn't seem to have any effect. Both h & l are out about 1 turn each.
After it started it would run with fuel down the carb but again too fast, idle adjust screw not touching the throttle lever . Might this be an air leak?
I will get around to photos. This one is a Mastercraft (Canadian Tire) version in a pleasant yellow with chain brake and anti-vibe. Came with a 16" B&C nearly new bar and a nearly new crap 91 safety chain with the big fins.
Regards,
Lee
-22 C this morning!
Overtrained
Not crazy, Stoopid!
It could be a vacuum leak. Usually it will race like crazy with the choke closed but maybe you compensated for that with extra fuel. I would rebuild the carb and make sure the base gaskets are good, the easy stuff first and then see what happens. Of course you can just change everything out at once too.
ChainLightning
Vintage Saw Stalker
Nice saw, old school homie. Kind of reminds me of the MAC 15 of the day. Hows the AV on that baby?
Not bad at all Dennis, I have had Wild things that rattled me more than that thing.
Overtrained
Not crazy, Stoopid!
Ahh its a family. I really like these saws
Overtrained
Not crazy, Stoopid!
Got to love the vintage stuff. One day when I grow up I have the venture into some older bigger CC saws
Ahh its a family. I really like these saws
I can see that, maybe i will have to get me a family of those sometime.
ChainLightning
Vintage Saw Stalker
Got to love the vintage stuff. One day when I grow up I have the venture into some older bigger CC saws
You'd better start collecting them now...cause i'm gonna get all thats left of em...and I don't trade for Mini Mac's..
ChainLightning
Vintage Saw Stalker
Ahh its a family. I really like these saws
Very cool! Some good saws in very nice shape. You should do a group photo of all your Macs.
Magnumfloyd
ArboristSite Operative
You'd better start collecting them now...cause i'm gonna get all thats left of em...and I don't trade for Mini Mac's..
That mini mac is a fine saw
