Nik's Poulan Thread

[a. palmer jr.]

Can anyone tell me where I can purchase parts for the Poulan Pro 4218AVX. I would prefer to purchase all parts from an AS member. Please PM me with any recommendations. If this is a violation of AS rules, please delete the post and forgive me. Please understand that it is not my intent to get myself or anyone into trouble!! Thanks, Islero :msp_smile:

That isn't a rare saw so parts should be available. Some of us don't usually sell parts to other members but I imagine there are some takers here. No violation of rules that I can see but usually they post sales in the classified section of AS. Ebay is where I usually go to get used parts but you take your chances...

 

[Islero]

That isn't a rare saw so parts should be available. Some of us don't usually sell parts to other members but I imagine there are some takers here. No violation of rules that I can see but usually they post sales in the classified section of AS. Ebay is where I usually go to get used parts but you take your chances...

a. palmer jr., I have attempted to purchase the parts on Ebay, no luck. I have also just finished posting my request on the classified section of AS. Thanks, Islero :msp_smile:

 

[OhioGregg]

Can anyone tell me where I can purchase parts for the Poulan Pro 4218AVX. I would prefer to purchase all parts from an AS member. Please PM me with any recommendations. If this is a violation of AS rules, please delete the post and forgive me. Please understand that it is not my intent to get myself or anyone into trouble!! Thanks, Islero :msp_smile:

If your wanting used parts, site sponsor Chainsawr.com would be a good place to look. Most any Outdoor Power Equipment dealer, like ones that sell mower parts etc. also might be able to order New stuff. You can always order yourself through Poulan. Then there is always eeeebay, or other members here who might have a similar saw, to donate parts from. I myself don't have any saws along those lines, so I ain't much help.


Gregg,

 

[a. palmer jr.]

a. palmer jr., I have attempted to purchase the parts on Ebay, no luck. I have also just finished posting my request on the classified section of AS. Thanks, Islero :msp_smile:

In some cases it might be easier to just get a parts saw if you need very many parts. Also, have you tried Chainsawr.com? I've bought several parts from them. If you know the Craftsman equivalent you can always order parts from Sears parts direct.

 

[OhioGregg]

Why on earth wouldn't u want to push it?

It's fun.

Just try it Wendell.

U know u wanna....

I push mine all the time!! Once you push it a couple a times, it becomes a habit!


Gregg,

 

[Islero]

If your wanting used parts, site sponsor Chainsawr.com would be a good place to look. Most any Outdoor Power Equipment dealer, like ones that sell mower parts etc. also might be able to order New stuff. You can always order yourself through Poulan. Then there is always eeeebay, or other members here who might have a similar saw, to donate parts from. I myself don't have any saws along those lines, so I ain't much help.


Gregg,

Gregg, what I am currently looking for is a couple of screws for the oil pump. As far as I know I have all the parts to rebuild my saw, I simply misplaced the screws. Thanks for your response, Islero :msp_smile:

 

[rms61moparman]

Gregg, what I am currently looking for is a couple of screws for the oil pump. As far as I know I have all the parts to rebuild my saw, I simply misplaced the screws. Thanks for your response, Islero :msp_smile:

I'll get those in the mail to you today Ilene.
P.M. me your address again.


Mike

 

[Islero]

I'll get those in the mail to you today Ilene.
P.M. me your address again.


Mike

Mike, the PM has been sent. Hope your feeling better. Thanks, IRC :msp_smile:

 

[HeRoze]

Which saw? The "J-4000"?

I like the "J4K"

 

[Chris J.]

Can anyone tell me where I can purchase parts for the Poulan Pro 4218AVX. I would prefer to purchase all parts from an AS member. Please PM me with any recommendations. If this is a violation of AS rules, please delete the post and forgive me. Please understand that it is not my intent to get myself or anyone into trouble!! Thanks, Islero :msp_smile:

Depending on what parts you're needing and their cost, you might do well to look for a non-running parts saw. If asthestic appeal isn't important, the relabelled Craftsman versions are fairly common.

 

[Islero]

Depending on what parts you're needing and their cost, you might do well to look for a non-running parts saw. If asthestic appeal isn't important, the relabelled Craftsman versions are fairly common.

Chris J., thanks for your response. Mike will be sending me the needed parts this evening.
Again, thanks and have a good one, Islero :msp_smile:

 

[RedneckChainsawRepair]

I pulled my parts 3400 off the shelf to snap some pics for guys. Guess what I never noticed it had on it. :confused2: The hint is in th pics looking right at you. :msp_tongue:

 

[RedneckChainsawRepair]

My stock 4000 in video above.

Got stickers for clutch cover from ohiogregg, except my cover took different decal

 

[Eccentric]

I pulled my parts 3400 off the shelf to snap some pics for guys. Guess what I never noticed it had on it. :confused2: The hint is in th pics looking right at you. :msp_tongue:

That's easy. A 4000/PP375/PP395 type top cover assembly has been swapped on.

 

[RedneckChainsawRepair]

That's easy. A 4000/PP375/PP395 type top cover assembly has been swapped on.

Yep, I had never noticed it before till today. Felt like I got a little extra out of my parts saw deal now. :victory:

 

[Modifiedmark]

That's easy. A 4000/PP375/PP395 type top cover assembly has been swapped on.

Nope, its a 4000 cover. A pp395 cover is not black.

 

[rms61moparman]

Chris J., thanks for your response. Mike will be sending me the needed parts this evening.
Again, thanks and have a good one, Islero :msp_smile:

Ilene,

Clean out your P.M. box!!!LOL

If you sent a P.M. to me, I need you to do it again, it didn't go through.


Mike

 

[redunshee]

Nope, its a 4000 cover. A pp395 cover is not black.

Tell me why I knew you would know that! You the man!

 

[redunshee]

I push mine all the time!! Once you push it a couple a times, it becomes a habit!


Gregg,

What are you guys talking about? You're making me think it has nothing to do with saws!

 

[OhioGregg]

What are you guys talking about? You're making me think it has nothing to do with saws!

Oiler buttons !!! Yea, thats it, oiler buttons.:msp_ohmy:


Gregg,