Sure is quiet in here....do I need to start a fight?

[tbone75]

Didn't go get the trim. Decided to just relax a little. Only need 16' of trim,plus one door. Got my supper ate , now its real hard to get back up and do anything ! LOL

My camper is going to be here between 12 & 1 tomorrow. Just found out it 24' long ! Think I will pass on that second one ! This should be nuff for a good while ! LOL Hope we can get it back where I want it ? Bad part its on the hill side. Have to block it up about 3' on one side ! LOL

 

[tbone75]

i have a wisconsin vh4d gasoline engine that wont start...not getting any fire to the plugs...need help please

Sorry I know nothing about them ?

 

[pioneerguy600]

i have a wisconsin vh4d gasoline engine that wont start...not getting any fire to the plugs...need help please

That must be a big chainsaw!!

 

[Scooterbum]

i have a wisconsin vh4d gasoline engine that wont start...not getting any fire to the plugs...need help please

That uses a Mag, did you check the points?

 

[pioneerguy600]

i have a wisconsin vh4d gasoline engine that wont start...not getting any fire to the plugs...need help please

Here is an IPL that covers the parts to your engine including the points and the magneto. Click on the green link below,

http://www.pittauto.com/customer/piauel/pdf/Wisconsin_VH4D_Parts_V2.pdf?gclid=COTazf6xsrcCFQae4Aod50IAVw

 

[tbone75]

That uses a Mag, did you check the points?

Whos this guy ? :msp_rolleyes:

 

[pioneerguy600]

Whos this guy ? :msp_rolleyes:

:newbie:

 

[tbone75]

Haven't done squat since I got the tile laid. Body is on strike ! LOL

 

[dancan]

i have a wisconsin vh4d gasoline engine that wont start...not getting any fire to the plugs...need help please

Had one of them , sure liked it's fuel , I replaced mine with a 50hp Kubota , fuel savings in less than a year paid for the swap LOL
Documentation here .

The guys in the Large Equipment forum may be able to help .

 

[dancan]

Was nice while it lasted, durn fog shut it down..

Looks all dark and stormy out there now , speaking of which ..........................

 

[tbone75]

Seems the SLACKERS are out tonight ! :msp_razz:

 

[jimdad07]

Trying a parts cleaning method out that Jimmy and I talked about the other day. Using electrolysis for removing rust and cleaning parts that are steel. I have a tub of water mixed with washing soda (not to be confused with baking soda), a piece of re-bar as an electrode and a Die-Hard battery charger set to 10 amps. You can see it working about as fast as you pug it in, pretty neat. I'll check it in an hour or two and see if I am getting a rust cloud going to the electrode. I hooked the electrode to the positive side of the charger above water and the part I am de-rusting to negative with the connection below water. The electrode is sitting partially in the water but not touching the part I am de-rusting.

 

[little possum]

Got up at 430 am Friday, worked till lunch. Rode to VA to get a Blazer with my buddy. Drug in way to late last night. Up early for breakfast.. Started and checked 2 of the tractors, bush hogged for 6 hrs, helped fix 2 saws, tilled and and planted a garden, dug boulders outta moms yard. hahah bed time. what a eventful day off hahahah

 

[Stihl 041S]

Seems the SLACKERS are out tonight ! :msp_razz:

Right here!!!!

Slack. Slack. Slack. Slack. Slack. Slack.

Hey John!!!!

 

[jimdad07]

Right here!!!!

Slack. Slack. Slack. Slack. Slack. Slack.

Hey John!!!!

Uncle Mongo!

 

[Stihl 041S]

Trying a parts cleaning method out that Jimmy and I talked about the other day. Using electrolysis for removing rust and cleaning parts that are steel. I have a tub of water mixed with washing soda (not to be confused with baking soda), a piece of re-bar as an electrode and a Die-Hard battery charger set to 10 amps. You can see it working about as fast as you pug it in, pretty neat. I'll check it in an hour or two and see if I am getting a rust cloud going to the electrode. I hooked the electrode to the positive side of the charger above water and the part I am de-rusting to negative with the connection below water. The electrode is sitting partially in the water but not touching the part I am de-rusting.

Sounds like the one pn PM.

Works and don't hurt.

Hey Jimmy.

 

[Stihl 041S]

Uncle Mongo!

Hey James. You need a box soon......

I am slow.

Edit;

I got to send out a LOT of boxes.

 

[tbone75]

Trying a parts cleaning method out that Jimmy and I talked about the other day. Using electrolysis for removing rust and cleaning parts that are steel. I have a tub of water mixed with washing soda (not to be confused with baking soda), a piece of re-bar as an electrode and a Die-Hard battery charger set to 10 amps. You can see it working about as fast as you pug it in, pretty neat. I'll check it in an hour or two and see if I am getting a rust cloud going to the electrode. I hooked the electrode to the positive side of the charger above water and the part I am de-rusting to negative with the connection below water. The electrode is sitting partially in the water but not touching the part I am de-rusting.

Sounds very interesting. Seen them for cleaning guns and gun parts. Looked like they worked real good.

 

[IEL]

I didn't even touch a saw today. :msp_angry: Tomorrow will be the saw day.

 

[tbone75]

Right here!!!!

Slack. Slack. Slack. Slack. Slack. Slack.

Hey John!!!!

Stihl relaxing ! Gotta try doing grout tomorrow. :help: