Swap meet...

[Jacob J.]

JJ, I've added a picture of the bar tip. Hope that helps ID it.

Thanks

Jon

I'm not seeing anything.

 

[KTM640]

Pic added

Sorry about that. I just got done with an edit and added the pic.

 

[Jacob J.]

Sorry about that. I just got done with an edit and added the pic.

Ok, yeah that's a Windsor "Three-rivet" tip. It has the long tail secured by the three small Windsor rivets. You can get those from several of our sponsors- Bailey's, Edge & Engine, etc.

 

[diggers_dad]

Pioneer P20?

Anyone here interested in a Pioneer P20? It's not my thing but I saw one today that was running and for sale.

I'm looking for a piston and cylinder for an 026.

Send me a PM about either one.

 

[epicklein22]

Anybody have new bearings for a husky 395 or know of a generic bearing that will work?

 

[Jacob J.]

Anybody have new bearings for a husky 395 or know of a generic bearing that will work?

Yeep- 6203 series. About 10 buck each at your local industrial supply house. I get the SKF 62032RSEM. They have rubber shields and you pop the shields out.

 

[Modifiedmark]

Yeep- 6203 series. About 10 buck each at your local industrial supply house. I get the SKF 62032RSEM. They have rubber shields and you pop the shields out.

Glad to see I'm not the only one popping the rubber seals out. The 5200 I just did use's the same 6203 brg. Got a deal on 10 of them on ebay. Name brand C3 rated. Cheap.

I did one saw once just for the heck of it and left the outer seal on the brg. Works fine, passed pressure and vac test great.

 

[Jacob J.]

Glad to see I'm not the only one popping the rubber seals out. The 5200 I just did use's the same 6203 brg. Got a deal on 10 of them on ebay. Name brand C3 rated. Cheap.

I did one saw once just for the heck of it and left the outer seal on the brg. Works fine, passed pressure and vac test great.

I actually think it would be ok to leave the rubber seal in on the flywheel side, on the outside of the bearing. It doesn't get that warm on that side for most saws. Even when I was cutting logs in the summer and a saw would be running 6-7 hours, that side of the case was noticeably cooler.

 

[jrocket]

husky 357xp,

I"m interested in selling a husky 357xp, e-tech, dont know how much to ask for it.
bad piston but cyl is good, 2 cooling fins have corners broke off.
air filter cover smashed, filter missing
fuel cap missing, the rest is all there and appears to be in decent shape.
what do you guys think would be a fair price?
any body interested?
thanks.

 

[jrocket]

I"m interested in selling a husky 357xp, e-tech, dont know how much to ask for it.
bad piston but cyl is good, 2 cooling fins have corners broke off.
air filter cover smashed, filter missing
fuel cap missing, the rest is all there and appears to be in decent shape.
what do you guys think would be a fair price?
any body interested?
thanks.

I"m also looking for a top handle(half wrap), and a clutch cover/chain brake assy for a 272xp, would be glad to trade.

 

[firefighter33]

I"m interested in selling a husky 357xp, e-tech, dont know how much to ask for it.
bad piston but cyl is good, 2 cooling fins have corners broke off.
air filter cover smashed, filter missing
fuel cap missing, the rest is all there and appears to be in decent shape.
what do you guys think would be a fair price?
any body interested?
thanks.[/QUOT

PM sent

 

[67L36Driver]

Poulan Super XXV parts needed.

Poulan model S25CVA tophandle looking for:

Trigger..........23601

carb housing to case gasket.........19049
carb housing gasket (air box lid)........19074
throttle wire boot...............no pn

Did I say I needed a trigger? ............. Gonna be awkward using a string.

Lots of cheap Poulan 2150 (ish) misc parts. Ok, Ok, Wild Thing and smaller to trade.

or maybe just some long green (in small denominations).

 

[67L36Driver]

Glad to see I'm not the only one popping the rubber seals out. The 5200 I just did use's the same 6203 brg. Got a deal on 10 of them on ebay. Name brand C3 rated. Cheap.

I did one saw once just for the heck of it and left the outer seal on the brg. Works fine, passed pressure and vac test great.

Where I worked as a plant engineer we stocked either double shield or double seal bearings and just poped out one or both sides as needed. Also used the MRC number/style system when stocking bearings. That bearing would be a 203SZZ
200=light series
S=max capacity
Z=seal
F=shield

 

[little possum]

Looking for a top cover, or 2 for a Jred 670

 

[SawGarage]

Where I worked as a plant engineer we stocked either double shield or double seal bearings and just poped out one or both sides as needed. Also used the MRC number/style system when stocking bearings. That bearing would be a 203SZZ
200=light series
S=max capacity
Z=seal
F=shield

Would you be so kind as to expound a bit further?? (IE: what is a 6202 bearing #? 202SZZ?? (assuming the other variables are the same??)

thanks!

J

 

[SawGarage]

Looking for a top cover, or 2 for a Jred 670

Hey Zach..

yeah, me too...for a while..

288 find a new home yet?

J

 

[little possum]

Hey Zach..

yeah, me too...for a while..

288 find a new home yet?

J

Waiting on a reply J.

 

[crane]

Anyone have a carter ND carb laying around. Needs to be complete, diaphrams/gaskets can be in any shape, as I'll rebuild it. I need it for an old Remington super770. The original carter was replaced with a Tilly HL159A. Problem lies with the choke shutter. It works opposite on the carter as opposed to the tillotson.
Cheers
Drew

 

[SawGarage]

Waiting on a reply J.

blizzard musta knocked out the can-string-can system down 'dem parts, eh?
oke:


let me know what happens...

plenty to trade, etc..

 

[jbird77]

jonered

I would like top find a builder saw a jonered somthin like a 630 ,670 , 2171 somthin in that line any body have an extra hollar at me