Swap meet...

[caleath]

026 Carb

Not sure of the part number, but I could use a carb for an 026. The saw I have has the fixed jet type. Not sure what I might have that someone would want. Got some green though.

Thanks
Cliff

 

[little possum]

Not sure of the part number, but I could use a carb for an 026. The saw I have has the fixed jet type. Not sure what I might have that someone would want. Got some green though.

Thanks
Cliff

I think you will need the WT194


And J, Ill let ya know

 

[Jacob J.]

Anyone have a carter ND carb laying around. Needs to be complete, diaphrams/gaskets can be in any shape, as I'll rebuild it. I need it for an old Remington super770. The original carter was replaced with a Tilly HL159A. Problem lies with the choke shutter. It works opposite on the carter as opposed to the tillotson.
Cheers
Drew

Hey Drew-

I think I might have an extra ND on a Wright Bladesaw that I bought for parts. I have the Carter ND on my 770 as well but need to hang onto that. I think the Wright saw has the same Carter carb though as they came out about the same time. I'll take a look today and see if it is.

 

[blsnelling]

Hey Drew-

I think I might have an extra ND on a Wright Bladesaw that I bought for parts. I have the Carter ND on my 770 as well but need to hang onto that. I think the Wright saw has the same Carter carb though as they came out about the same time. I'll take a look today and see if it is.

Any chance that one would have the reeds I need finish mine?

 

[Jacob J.]

Any chance that one would have the reeds I need finish mine?

I'll take a look and see, but mine is a different model. It's the bigger one with the intake tube off to the side?

 

[SawGarage]

Any chance that one would have the reeds I need finish mine?

Hey Brad,

How about taking some standard-fare 2-stroke bike reeds, and cutting them to size, hack-saw, coping saw, etc...

shouldn't be a big deal, or take a long time...IF you've been searching high, and low

J

 

[Scooterbum]

I believe Boysen (sp?) will still custom make reeds without breaking the bank.

Had some made for an old Bultaco I believe years ago.

 

[Big Dan]

Remington guide bar

Do any of you Remington guys need some roller tip bars?I've got a couple that need to go.

 

[Jacob J.]

Do any of you Remington guys need some roller tip bars?I've got a couple that need to go.

I could use a shorter one, 18" to 26" or so.

 

[caleath]

I think you will need the WT194

Sounds good...any one got one for trade or sale?

 

[crane]

I'd be interested also. Looking for good nos roller tip only if there's one in the pile.

Drew

 

[crane]

Hey Drew-

I think I might have an extra ND on a Wright Bladesaw that I bought for parts. I have the Carter ND on my 770 as well but need to hang onto that. I think the Wright saw has the same Carter carb though as they came out about the same time. I'll take a look today and see if it is.

Please let me know, PM sent

 

[Saw Dr.]

Do any of you Remington guys need some roller tip bars?I've got a couple that need to go.

I could go for one or two depending on length. What do you have?

 

[Big Dan]

I could use a shorter one, 18" to 26" or so.

I'm needing some parts for a poulan 3400 or a set of bucking spikes for a Dolmar 120si

 

[Big Dan]

I'd be interested also. Looking for good nos roller tip only if there's one in the pile.Drew

No NOS bars,only used stuff [in good condition though]

 

[Big Dan]

I could go for one or two depending on length. What do you have?

right off-hand I don't know what lengths I've got,I'll check them tomorrow and get back to you

 

[Jacob J.]

I'm needing some parts for a poulan 3400 or a set of bucking spikes for a Dolmar 120si

I don't have any Dolmar stuff, I gave all that to another member. I might have some 3400 stuff depending on what you need.

 

[stinkbait]

I have enough stuff to build a nice 041AV minus a good cylinder. Is there someone that has a good used cylinder for trade. Or maybe someone has some good mcculloch stuff that they might want to trade me for the 041AV stuff.

 

[Big Dan]

I don't have any Dolmar stuff, I gave all that to another member. I might have some 3400 stuff depending on what you need.

I need the oil pump,clutch assembly,and clutch cover

 

[lwn9186]

I have enough stuff to build a nice 041AV minus a good cylinder. Is there someone that has a good used cylinder for trade. Or maybe someone has some good mcculloch stuff that they might want to trade me for the 041AV stuff.

PM sent, I have a new one.