Swap meet...

[justme23005]

I'm looking for a 24-28 inch bar for my 372xp.

 

[SugCutter]

Homlite 20" Bar

I have a very nice Homlite 20" Bar that I don't have any use for.
The bar was purchased for a Homlite 360 many moons ago. I believe that it will also fit XL saws. 20" .375 x .050 11 tooth sprocket nose.
Takes a .375 x .050 70 DL chain.
Looking to swap for comparable Stihl 16" 3003 .325 x .063 bar OR a Husqvarna small mount (Husq 51) 16".375 x .050 Bar
PM any interest
Sug

 

[redray46]

Swap meet

I'm looking for a 24-28 inch bar for my 372xp.

I think I have one,do you need a chain with it?What do you have to swap?:
Illegitimi non carborundum!

Stihls,Huskys,Echoes and now a Dolmar PS 7300

 

[longbar]

What Homie 1020 parts do you have that you'd part with? I need an XP1020 or XP1020A model/sn tag (or a flywheel cover with the tag still attached) for starters. What XL12/SXL parts do you have? I could use a good muffler or two among other things. I don't have any of the parts you need however....

I have the flywheel cover w/out the tag. Otherwise most of the body parts but not the top handle or gas tank. SXL parts I have the inner muffler parts on the 2 peice muff but not the outter cover. Plus a couple parts saws with some to most parts attached....Just not the muffs I had to look long and hard for a couple too:bang:

 

[tomdcoker]

I have enough stuff to build a nice 041AV minus a good cylinder. Is there someone that has a good used cylinder for trade. Or maybe someone has some good mcculloch stuff that they might want to trade me for the 041AV stuff.

I have a cylinder for an 041av farm boss. It has one small area of metal tansfer. I can send you a picture if you will PM me your email address. Tom

 

[tlandrum]

ive decided that i really dont like the 372xp compared to the ms440 so, what i have is a 2003 372xp thats fresh from top to bottom. heres a list of whats new.
new bearings and seals
new oem 1 ring piston and ring
new engine cover
new starter rewind
new clutch cover
new oem crank(out of a 2009)
new muffler with muffler mod
fresh carb rebuild
2 week old bar and chain (24" husky solid roller tip)
new gas tank

this saw has a milled cylinder but no popup piston. it has a good woods port. i built this as a work saw and is very strong. it has about 8 tanks thru it and still is not broke in, the saw is pretty cherry,i want to trade it for a cherry ms440 or would sale it straight out for 500 but would rather trade it for a cherry ms440. i will get a pic of it up as soon as i can.


i also need a good ms440 gas tank

 

[justme23005]

I think I have one,do you need a chain with it?What do you have to swap?:
Illegitimi non carborundum!

Stihls,Huskys,Echoes and now a Dolmar PS 7300

Yes, i could use a chain too.. How long is the bar?
I have some dead presidents... will that work?

 

[cannonball027]

[url]http://i52.tinypic.com/e9[/url][IMG]



[IMG]http://i55.tinypic.com/2znwbww.jpg

ok i have same saws to trade i have Stihl 009 dont run right could be rings or something else i not had time to fool with it it dont want to start and pull cord broken and unknown stihl motor stuck missing side plate good plastic and other things on it and alot of 041 parts and two mini macs 25 and 35 one is whole other one missing few screws
like to trade hit me up the old stihl ms 036 is sold

 

[lamar_3704]

288

hey I'm lookin for a good P&C and a hightop top cover for a husqvarna 288 and another parts saw if anyone happens to have one... I'll never have enough of these things

 

[Madsaw]

I have been looking everywhere no luck! Even tried the scrap yard they will not put them aside for me. Thats why im looking here. Found a few on CL but they won't ship them

Got a homelite SXL925 with bad bearings. Got it from my uncle with a complaint that even with a new coil/ignition unit it still would not fire. I thought of sitting it aside and as I sort through my boxes of NOS homelite parts to get everythign together to redo teh bearings.
Bob

 

[firefighter33]

Got a homelite SXL925 with bad bearings. Got it from my uncle with a complaint that even with a new coil/ignition unit it still would not fire. I thought of sitting it aside and as I sort through my boxes of NOS homelite parts to get everythign together to redo teh bearings.
Bob

Sound like a good project. What size bar can they pull and are parts availabe?
Tried to PM u but ur box is full. What u looking to get for it? You can PM me. Thanks

 

[firefighter33]

Got a homelite SXL925 with bad bearings. Got it from my uncle with a complaint that even with a new coil/ignition unit it still would not fire. I thought of sitting it aside and as I sort through my boxes of NOS homelite parts to get everythign together to redo teh bearings.
Bob

Bob never mind the ?'s did some research and thats plenty of saw for my needs I'll take it as long as the price is right Thanks Mike

 

[barneyrb]

Makita DPC 7000

I have a Makita 12" chop saw. It has really good compression (can take a reading if desired) all paint in nice shape, and runs great. I bought this at an auction just for a job to repair a steel hulled barge. It cut the 3/8 plate like butter and I put maybe 8-10 hours on it.

I don't need anything but am open for trades of running, projects, and denero. Let me know what you have if interested.

 

[redray46]

Homelite carb and .404 chains

I still have 3 each .404 chains from an old Stihl S series saw to get rud of.I found an old Homelite carb while cleaning up last night,not sure what numbers are significant but here goes;SDC/Made in Japan/6-76 and a number 48.I am not looking for anything in particular right now,hit me if you need either of them.

"Illegitimi non carborundum"
Stihls,Huskys,Echoes and now a Dolmar PS7300.

 

[firefighter33]

Got a homelite SXL925 with bad bearings. Got it from my uncle with a complaint that even with a new coil/ignition unit it still would not fire. I thought of sitting it aside and as I sort through my boxes of NOS homelite parts to get everythign together to redo teh bearings.
Bob

Sent ya a PM Bob. Thanks Mike

 

[thomas1]

I've got a Poulan 3000 that I picked up with a bunch of other stuff. The clutch was off when I got it but, I put it back on and gave a few tugs and she fired up and seemed to run fine. I think compression was 135 if I remember correctly.
I can send pics on request.

I'm looking for 031, 041, mac 10-10, other interesting stuff.

 

[Big Dan]

Pioneer p11

Any one have a filter and filter cover for a Pioneer P11 or Oleo-Mac 233? I've got Pioneer,Homelite and some Stihl stuff to swap.:help: D.Brown

 

[Big Dan]

I don't have any Dolmar stuff, I gave all that to another member. I might have some 3400 stuff depending on what you need.

Hey JJ,have you had any time to check on that 3400 stuff,I do have an 18" and a couple of 22" Remington bars

 

[komatsuvarna]

I have 2 husqvarna coils. 1 is rev limited at 13,300 and 1 is rev limited at 14,100. Both have less than 1 hour run time.

I need an unlimited husqvarna coil to fit a 346.

 

[cannonball027]

[url]http://i52.tinypic.com/sg75ty.jpg[/url][/[IMG]
[IMG]http://i54.tinypic.com/14oaljm.jpg

i have a p 60 pineer i like to trade my uncle got it 15 years ago set in his basement i got it fixed it it had a crack in the side plate i jb weild should hold long time and the stater plate screws been stirped i retapped the screws with good hard bolts and fuel lines and filter carb cleaned runs strong i tested it on some pine and oak real good compresson should run a long time 24 bar and chain i like to sell or trade 170$