Swap meet...

[logging22]

What ya want for the pink socks???

 

[cannonball027]

 

[cannonball027]

my mom was setting there lol i can ask

 

[mdavlee]

Anything in particular you want for the P60 besides cash?

 

[Modifiedmark]

What ya want for the pink socks???

Think those will fit you?

my mom was setting there lol i can ask

Check your P.M.'s

 

[Jacob J.]

I have a Makita 12" chop saw. It has really good compression (can take a reading if desired) all paint in nice shape, and runs great. I bought this at an auction just for a job to repair a steel hulled barge. It cut the 3/8 plate like butter and I put maybe 8-10 hours on it.

I don't need anything but am open for trades of running, projects, and denero. Let me know what you have if interested.

Hey Randy-

If you don't get any bites on this then I may be able to set you up with something in trade when I get back from my current assignment.

Hey JJ,have you had any time to check on that 3400 stuff,I do have an 18" and a couple of 22" Remington bars

Dan-

I do actually have the 3400 if they are the same as the Craftsman 3700. I have a Craftsman 3700 parts rig. Unfortunately I just left on an assignment for work for a while and am 2100 miles from my shop.

 

[barneyrb]

Hey Randy-

If you don't get any bites on this then I may be able to set you up with something in trade when I get back from my current assignment.



NP, I was rearranging some stuff and found it. Had almost 2 yo gas in it and it fired right up. No hurry at all

 

[TRI955]

Need a clutch cover and top handle for a 61 Husky.



I have a Stihl 031 runner that I would trade for 181/281/288 parts or saw.

 

[MS460WOODCHUCK]

I have a like new Echo 370 to trade for? The saw is only about 4 months old. PM me if your interested.

 

[macmgfd]

I have two old saws that I have been thinking about working on and getting to run because they have set for years but also think about getting rid of them and getting something I can use.
One is a Mono not sure of the model but big and the other is a Titan and is also big.
I will get some pics when I get a chance.

 

[Jacob J.]

I have two old saws that I have been thinking about working on and getting to run because they have set for years but also think about getting rid of them and getting something I can use.
One is a Mono not sure of the model but big and the other is a Titan and is also big.
I will get some pics when I get a chance.

I'm interested in the Titan...

 

[Madsaw]

I have two old saws that I have been thinking about working on and getting to run because they have set for years but also think about getting rid of them and getting something I can use.
One is a Mono not sure of the model but big and the other is a Titan and is also big.
I will get some pics when I get a chance.

Not interested in the saws. Just where your from brings back memories of blowing up my truck tranny there. Nice town by the way.
Bob

 

[Eccentric]

I have the flywheel cover w/out the tag. Otherwise most of the body parts but not the top handle or gas tank. SXL parts I have the inner muffler parts on the 2 peice muff but not the outter cover. Plus a couple parts saws with some to most parts attached....Just not the muffs I had to look long and hard for a couple too:bang:

Thanks for getting back to me. Been away from the computer for a couple of days. My flywheel cover is actualy fine (at least I think it its...........it's still all grimey, so a crack could be hiding somewhere). I just need the tag, and would take a complete cover to get one if need be. I need a good P/C, and have a line on an NOS jug and aftermarket piston. Otherwise, I think I'm OK on that saw (will know for sure at teardown), other than the new bearings, seals, and gaskets that I'm going to need when I rebuild it.

I hear you on the XL12/SXL muffler situation. Seems that the outer can and cover are always cracked and/or rusted.

I have two old saws that I have been thinking about working on and getting to run because they have set for years but also think about getting rid of them and getting something I can use.
One is a Mono not sure of the model but big and the other is a Titan and is also big.
I will get some pics when I get a chance.

Possibly interested in the Mono, depending on model and condition.

 

[longbar]

Thanks for getting back to me. Been away from the computer for a couple of days. My flywheel cover is actualy fine (at least I think it its...........it's still all grimey, so a crack could be hiding somewhere). I just need the tag, and would take a complete cover to get one if need be. I need a good P/C, and have a line on an NOS jug and aftermarket piston. Otherwise, I think I'm OK on that saw (will know for sure at teardown), other than the new bearings, seals, and gaskets that I'm going to need when I rebuild it.

NP. If you know the part #'s on the gaskets and seals I just stummbled onto a bunch of NOS hommie parts. I know Ive got a bunch of both. No bearings though.

 

[Modifiedmark]

Thanks for getting back to me. Been away from the computer for a couple of days. My flywheel cover is actualy fine (at least I think it its...........it's still all grimey, so a crack could be hiding somewhere). I just need the tag, and would take a complete cover to get one if need be. I need a good P/C, and have a line on an NOS jug and aftermarket piston. Otherwise, I think I'm OK on that saw (will know for sure at teardown), other than the new bearings, seals, and gaskets that I'm going to need when I rebuild it.

I hear you on the XL12/SXL muffler situation. Seems that the outer can and cover are always cracked and/or rusted.



Possibly interested in the Mono, depending on model and condition.

Aaron, how about a XL-400 muffler for the XL-12? It would fit right?

I think I have a good one left.

 

[nmurph]

does anyone have a spare clutch cover for a 261/262 laying around? i will swap green paper with pictures of dead presidents for your cover.

 

[macmgfd]

The Titan is a model 30 with a 24" bar and chain.
The saw is complete other than needing a filter element.
Saw has spark and seems to have good compression but pull
start needs work. Starter works but short strokes.
Believe just needs good cleaning and carb cleaned.

 

[macmgfd]

The Mono says Model 67- Type1383 on the tag and is complete as far as I can tell and has a 24" bar and chain.
Saw has spark and seems to have good compression

 

[Big Dan]

Hey Randy-

If you don't get any bites on this then I may be able to set you up with something in trade when I get back from my current assignment.



Dan-

I do actually have the 3400 if they are the same as the Craftsman 3700. I have a Craftsman 3700 parts rig. Unfortunately I just left on an assignment for work for a while and am 2100 miles from my shop.

Thanks JJ,I don't know if the 3700 parts will work or not.Madsaw has the parts so I think I'll get them from him.However I will save you a 16" or 18" Remington roller tip,let me know which one you would rather have. Just let me know when you want it and we can work something out.Thanks, D.Brown

 

[SawGarage]

Thanks JJ,I don't know if the 3700 parts will work or not.Madsaw has the parts so I think I'll get them from him.However I will save you a 16" or 18" Remington roller tip,let me know which one you would rather have. Just let me know when you want it and we can work something out.Thanks, D.Brown

3400/3700/3800/4000 are all basically the same saw, with just the top end being the major difference IIRC..

Jay