Swap meet...

[cat-face timber]

I have some limited coils from 346's. They are limited above where your saw should run if it is stock. You are welcome to have one.

PM Sent

 

[nstueve]

Saw Garage,are you still looking for a 51/55 flywheel?
Mastermind,I thought I saw something about you having 024 parts?I need an air filter for a nice runner,the one I took off an 026 is to high,do you have one?
RR

1)I need a chain brake with clutch cover for a 272XP.
2)I am also looking for an air filter for an 024AVWB,it is the shorter one.I have one for an 026, which fits the carb,but is to tall for the carburetor cover.I believe the part number is 1121 120 1617.
I have a ton of 028 parts,Husky 142/36,a N O Stock crankcase for Stihl 011 series,and other good stuff.
RR

I'm about 99% sure I got a good 024 air filter... unless mastermind already has you covered...

 

[oldmanriver]

Craftsman 3.7 (Poulan 3700)

Anyone need any Craftsman 3.7 (Poulan 3700) parts? Picked one up recently for a little of nothing. Saws in bad shape but has allot of usable parts. Z

 

[little possum]

Bump

I got a parts saw, but no clutch cover... Interested?

 

[AU_K2500]

I got a parts saw, but no clutch cover... Interested?

I would be if i had cash or anything worth while to trade for a whole saw. The one ive got is all there. the clutch cover just has a big chunk missing at the bottom, so its not like i need it to run the saw, just me wanting everything to be right.

 

[ChainsawmanXX]

I got a parts saw, but no clutch cover... Interested?

Zach, pm me with a price when you get a chance i may just send you the money for that saw, you send it to mark when i send you a check for the other saws. Ill pay for postage as well. Marks a good guy.

 

[Duke Thieroff]

Anyone have a fuel cap for a Homelite 410?


Chris

 

[ChainsawmanXX]

Anyone have a fuel cap for a Homelite 410?


Chris

No, but i have one for a homelite XL. Will that work???

 

[Duke Thieroff]

No, but i have one for a homelite XL. Will that work???

I don't think so, handsome.

 

[Roanoker494]

I need a Husqvarna 362/365/372 chain brake handle. Let me know what you need and I will see what I can do. I know I have a Husky 51/55 brake handle, a early 50 Rancher brake handle, some Lombard AP42 parts, various Tecumseh parts, various Craftsman/Roper 3.7 parts and I am sure there is more around here.

 

[nstueve]

update:
Also Wanted: Jonsered 801 or compatable cylinder

bump: I think a 80, 90 or 801 top end will work. the one I have has pitting in it...

Also in need of:

026 air filter cover

 

[4cyl2vy]

Anyone need any Craftsman 3.7 (Poulan 3700) parts? Picked one up recently for a little of nothing. Saws in bad shape but has allot of usable parts. Z

PM sent

 

[Mastermind]

Saw Garage,are you still looking for a 51/55 flywheel?
Mastermind,I thought I saw something about you having 024 parts?I need an air filter for a nice runner,the one I took off an 026 is to high,do you have one?
RR

I'm about 99% sure I got a good 024 air filter... unless mastermind already has you covered...

I don't have any air filters for that series. It seems they are a hot item lately...

 

[o8f150]

does anyone have a use for this felling dog?? it fits 455 rancher and others,, here is the part number 503523901b
so a search of the number to see if any one of you can use it,, sorry no pic ,, yep,,free to a good home

 

[SawGarage]

Anyone?

see below --->

A useable 390XP cylinder I'm afraid is a tough find.

Yes, it is... I found one a while ago... thought I was lucky, till I saw the inside someone doesn't know that a 56mm ball hone can DAMAGE a 55mm bore :bang: ports are rounded, and there's some alum showing below the exh port....


uncool..

 

[wigglesworth]

see below --->



Yes, it is... I found one a while ago... thought I was lucky, till I saw the inside someone doesn't know that a 56mm ball hone can DAMAGE a 55mm bore :bang: ports are rounded, and there's some alum showing below the exh port....


uncool..

Here ya go J, I got this for u....

 

[o8f150]

Here ya go J, I got this for u....

:msp_lol::msp_lol::msp_lol::msp_lol:

 

[o8f150]

does anyone have a use for this felling dog?? it fits 455 rancher and others,, here is the part number 503523901b
so a search of the number to see if any one of you can use it,, sorry no pic ,, yep,,free to a good home

looks like it has a new home already

 

[Arrowhead]

Stihl looking for a brake handle for an 084 and av mounts for an 056 magnum full wrap handle.

Got stuff to swap.

 

[Mastermind]

I'm on the lookout for a very strong running yet fuel efficient saw. Also the anti vib must be firm but still easy on the operator. Easy starting is also a must at my age. If anyone has such a saw to give away please contact me. :msp_biggrin: