Swap meet...

[Mastermind]

Don't go Randy. Take a good look at Jon's gimpy foot instead....

Yeah that helps........gimme a shot of Demerol. :msp_ohmy:

Boy that brings back memories. Oh the fun we had on the short bus. In NC high school students drove the buses when I was a kid.

Can we please get back to saws..

I am looking for a Husky 3120 XP with a 48" bar pulling .404 chain. (ported by Brad)

I am willing to trade some Arizona Wind, and some Arizona Sunshine.

I have alot of both....

Keep the wind and the sunshine......I'm building a MS880 and have a deal in the works to do a 3120.

 

[Duke Thieroff]

Any chance someone has some piston circlips for a Homelite 410, I believe they are the same as used in most Homelite saws, super EZs, Super Xls, and so on.

Homelite Part # 64813

Chris

Again, cause a few buddies were having too much fun!



Chris

 

[Eccentric]

Again, cause a few buddies were having too much fun!



Chris

Well I got's some used XL-12/SXL clips I could sendja. New would be a better bet though. Why do you need circlips for that saw?

 

[Duke Thieroff]

Well I got's some used XL-12/SXL clips I could sendja. New would be a better bet though. Why do you need circlips for that saw?

One got bent during removal, then it decided to fling itself across the shed. I reckon it needs replacing.


Got the Case running today. God that thing is going to be awesome.

Chris

 

[Eccentric]

One got bent during removal, then it decided to fling itself across the shed. I reckon it needs replacing.


Got the Case running today. God that thing is going to be awesome.

Chris

Ping!!!!!!!!!!!!!!!!!!!!!!!! BTDT...:msp_unsure:


As for the Case..........once again I toldya so.

Since it's a 155 it should have a 10HP Kohler. My Dad's was a 190 (finaly remembered the model #). One generation older than yours, and 12HP instead of 10HP. Change out the juice in the transmission if it's skuzzy.....

 

[Warped5]

I rode the short bus? It was cool! :hmm3grin2orange:

That's because there were 16 kids in your school.

Ping!!!!!!!!!!!!!!!!!!!!!!!! BTDT...:msp_unsure:


As for the Case..........once again I toldya so.

Change out the juice in the transmission if it's skuzzy.....

Words for life, to be sure ....

 

[Metals406]

One got bent during removal, then it decided to fling itself across the shed. I reckon it needs replacing.


Got the Case running today. God that thing is going to be awesome.

Chris

I can send ya more stuff. . . Apparently it has to go through Denver first though.

Lemme see what I got. Super XL ya say?

 

[tbone75]

That's because there were 16 kids in your school.






Words for life, to be sure ....

School? Whats dat?

 

[Duke Thieroff]

Ping!!!!!!!!!!!!!!!!!!!!!!!! BTDT...:msp_unsure:


As for the Case..........once again I toldya so.

Since it's a 155 it should have a 10HP Kohler. My Dad's was a 190 (finaly remembered the model #). One generation older than yours, and 12HP instead of 10HP. Change out the juice in the transmission if it's skuzzy.....

Enough I told ya so! You didn't have to tell me I knee already! That's why I bought it! How about returning a phone call every now and again!

Enough of that jive....

I've been steadily researching this tractor and it has a Kohler K241 10hp motor on it. This one in particular needs a few bits, little stuff. I need to fab an exhaust up, go over some of my linkages and stuff.

I had to re-wire the ignition system, as well as eliminate the push button/keyed ignition to just a 4 way ignition switch. This set up was far to rotted out to be rebuilt. Used parts, if found cost more than new AM parts.

I plan on actually cutting grass and general utility duty with this thing, so functionality is much more important to me at this point in time over being completely original.

Very simple machine overall, although some things can be frustrating, just because I'm learning as I go.

Definitely happy with my purchase and to hear it run, if only for a few minutes, is totally worth it.

Chris

 

[Duke Thieroff]

I can send ya more stuff. . . Apparently it has to go through Denver first though.

Lemme see what I got. Super XL ya say?

God, I gotta get both them saws running. That SP60 has huge compression. The 410 is ready to go back together. Piston and cylinder have been cleaned of carbon, new intake boot, and a good cleaning.


Let me know what you got Nate, I'd appreciate it.

Chris

 

[tomdcoker]

ok if anyone has this oil line i need it to get my new to me echo 60 super back to cutting wood again. I have looked all over the internet and even checked with echo and they said it was NLA and they could find no one that had it.

So fellow saw lovers if you would please look and see if you got anything that looks like this please let me know.

Try Edge and Engine a site sponsor. They have gotten me some parts that I could notfind any other place. Tom

 

[logging22]

I dont have any maters or taters or rubarb, whatever the hell that is. But i do have some slightly used play dough of many colors. I could use some 041 parts. Trade and you pay shipping. Ill send you my credit card number and you pay me back. Kool?? Just sayin and stuff. Wait? Is this the "jeezo flip im on the wrong friggin thread for stupid crap that makes no sense and make everybody else crazy thingy". Just wondering.

 

[thomas1]

Sorry we got sidetracked Mang, but since we're back on topic now..........I'm looking for a primer bulb for my 4 cycle string trimmer, and the bolt, and wing nut (no not Warped5) that keeps the handle from spinning around.........I don't have any money, but I have some wore out POS saws, and some really dull chain to trade.

thomas1 told me this is where I should look for stuff I could get at ace hardware

Only post here after you have exhausted all other resources including searching the entire internets. You must also be in dire need of the parts in question. Whatever you do though don't check with a dealer or a place that sells the things you need and, above all, do not use google. Also, make sure to ignore the first 17 people who tell you the easiest way to fix your problem.

Stay classy, San Diego.


Anybody want a Wright bladesaw?

 

[logging22]

Only post here after you have exhausted all other resources including searching the entire internets. You must also be in dire need of the parts in question. Whatever you do though don't check with a dealer or a place that sells the things you need and, above all, do not use google. Also, make sure to ignore the first 17 people who tell you the easiest way to fix your problem.

Stay classy, San Diego.


Anybody want a Wright bladesaw?

Yes.

 

[forestryworks]

Anybody got a good 046 cylinder?

No plating wear or nicks, etc., please.

 

[wendell]

Time to get this thread back on track. :hmm3grin2orange:

Wheat vodka? I thought vodka was only made from potatoes. Looks like I just learned sumthin'. I just did a google search for "vodka images" and grabbed one that looked good....

Tasty!

 

[oldmanriver]

BEER... That's for women and children...

Wild Turkey 101 Ummmmmmm.....

:hmm3grin2orange:

 

[fastLeo151]

BEER... That's for women and children...

Wild Turkey 101 Ummmmmmm.....

:hmm3grin2orange:

We both drink the same toilet water, but when in feeling rich I will get a bottle of nob creek...

 

[dh1984]

Try Edge and Engine a site sponsor. They have gotten me some parts that I could notfind any other place. Tom

I'll start looking on the site sponsers and if i don't find anything there then i'll just set it on the back burner untill i can find the parts i need for it.

but heck with beer and vodka I got the old fashion back woods Moon Shine made in the Tennessee Hills :wink:

 

[Arrowhead]

Anybody got some spare rhubarb?

I got some asparagus and tons of morel mushrooms. :msp_tongue: