Swap meet...

[RedneckChainsawRepair]

I have 2 brand new here I didnt need on a project.

My hero....

Just found them. Last poulan bin I looked in.

Are these what you are needing. If so going in mail tomorrow.

 

[Mac88]

Poulan 25D, S25CVA Parts Needed

Someone must still have a few of these lying around somewhere.

For the 25D, I'm in need of a complete flywheel, including the starter hardware.

For the S25CVA, I need the clutch cover (Poulan calls it a "bar clamp").

I have dead presidents to trade. Just trying to put both of these oldies back to work.

 

[nmurph]

Lookin for a clutch for a Husky 141. I think there are lots of others that will fit but not sure which ones. I have stuff to trade or DP.

If you can find out what others will fit, I will take a look in the spare parts box.

 

[Eccentric]

Someone must still have a few of these lying around somewhere.

For the 25D, I'm in need of a complete flywheel, including the starter hardware.

For the S25CVA, I need the clutch cover (Poulan calls it a "bar clamp").

I have dead presidents to trade. Just trying to put both of these oldies back to work.

You wouldn't happen to have any McCulloch Super 2-10A parts (specifically the carb needle 'extensions', springs, and retaining rings) would you? How about a 'short' Mac 10-series chainbrake type clutch cover? I may be able to hook you up with the S25 and S25-CVA parts (with either a Mac parts trade or a trade for some folded green paper).

 

[RedneckChainsawRepair]

Lookin for a clutch for a Husky 141. I think there are lots of others that will fit but not sure which ones. I have stuff to trade or DP.

If you can find out what others will fit, I will take a look in the spare parts box.

Very common clutch. All the little poulans had them too.

Here's your list. :msp_wink:

JONSERED MODELS
2035, 2036, 2040, CS2040, CS2137, CS2138, CS2234, CS2234S, CS2238, CS2238S
Also fits many Partner & Poulan built McCulloch models.
Jonsered 2036
· · · · 2775
· 2900
· PP295
· PP4620y
· 1900
· 1950
· 1975


· 2050
· 2055
· 2075
· 2150
· 2155
· 2175
· 2375
· BH2160 Poulan Gas Saw-->Handle, Chassis & Bar Assembly
· S1634 Snapper Gas Saw Type 1-->Handle & External Assembly
· S1634 Snapper Gas Saw Type 2-->Handle & External Assembly
· S1634 Snapper Gas Saw Type 3-->Handle & External Assembly
· S1838 Snapper Gas Saw-->Handle & External Assembly
· 2250 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-4
· 2250 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-4
· 2250 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-4
· 2250 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-4
· 2250 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 5
· 2250 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 6
· 2250 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
· 2250LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly
· 2250LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly
· 2450 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-4
· 2450 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-4
· 2450 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-4
· 2450 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-4
· 2450 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 5
· 2450 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 6
· 2450 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
· 2550 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-4
· 2550 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-4
· 2550 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-4
· 2550 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-4
· 2550 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 5
· 2550 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 6
· 2550 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
· 2550LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
· 2550LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
· 2550SE Gas Saw Type 1-->Chassis & Handle Assembly Type 1
· 2550SE Gas Saw Type 2-->Chassis & Handle Assembly Type 2
· 2555 FLW Limited Edition-->Handle, Chassis, And Bar Assembly
· BH2660 Poulan Pro Gas Saw-->Handle, Chassis & Bar Assembly
· PP220 Gas Chain Saw Type 1-->Handle, Chassis & Bar Assembly
· PP220 Gas Chain Saw Type 2-->Handle, Chassis & Bar Assembly
· PP220 Gas Chain Saw Type 3-->Handle, Chassis & Bar Assembly
· PP220 Gas Chain Saw Type 4-->Handle, Chassis & Bar Assembly
· PP220 Gas Chain Saw Type 5-->Handle, Chassis & Bar Assembly
· PP220LE Gas Saw-->Handle, Chassis & Bar Assembly
· PP221 Gas Chain Saw Type 1-->Chassis & Handle Assembly Type 1-3
· PP221 Gas Chain Saw Type 2-->Chassis & Handle Assembly Type 1-3
· PP221 Gas Chain Saw Type 3-->Chassis & Handle Assembly Type 1-3
· PP221 Gas Chain Saw Type 4-->Chassis & Handle Assembly Type 4
· PP221LE Gas Chain Saw Type 1-->Handle, Chassis & Bar Assembly
· PP221LE Gas Chain Saw Type 2-->Handle, Chassis & Bar Assembly
· PP260 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1,2,3
· PP260 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1,2,3
· PP260 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1,2,3
· PP260 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 4,5
· PP260 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 4,5
· PP260 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 6
· PP260LE Gas Saw Type 1-->Handle,Chassis & Bar Assembly
· PP260LE Gas Saw Type 2-->Handle,Chassis & Bar Assembly
· SM4018 Gas Saw-->Chassis & Handle Assembly
· Titanium 2550T Gas Saw-->Handle, Chassis & Bar Assembly
· 1900 LE Gas Saw-->Handle, Chassis & Bar Assembly
· 1950LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
· 1950LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
· 1975LE Woodshark Gas Saw Type 1-->Handle & External Assembly Type 1
· 1975LE Woodshark Gas Saw Type 2-->Handle & External Assembly Type 2
· 2050LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly
· 2050LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly
· 2055LE Gas Chain Saw Type 1-->Chassis & Handle Assembly Type 1
· 2055LE Gas Chain Saw Type 2-->Chassis & Handle Assembly Type 2
· 2075 LE Gas Saw-->Handle, Chassis & Bar Assembly
· 2150LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
· 2150LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
· 2150LE Predator Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
· 2150LE Predator Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
· 2175LE Gas Saw-->Handle, Chassis & Bar Assembly
· 222 Gas Saw-->Handle & Chassis & Bar Assembly
· 2375LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
· 2375LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
· 262 Gas Saw-->Handle, Chassis & Bar Assembly
· BH2160LE Gas Saw-->Handle, Chassis & Bar Assembly
· PPB1634LE Gas Saw-->Chassis & Handle Assembly
· PPB1838LE Gas Saw-->Chassis & Handle Assembly
· S1634LE Gas Saw-->Handle & Chassis
· S1838LE Gas Saw-->Handle & External Assembly
· 2025 Gas Saw-->Handle & External Power Unit
· 2200 Gas Saw-->External Power Unit
· 2350 Gas Saw-->Handle & External Power Unit
· 2500 Gas Saw-->External Power Unit
· 2600 Gas Saw-->External Power Unit
· 2750 Gas Saw-->External Power Unit
· 2775 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1 & 2
· 2775 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1 & 2
· 2900 Gas Saw Type 1-->Handle, Chassis & Bar Assembly
· 2900 Gas Saw Type 2-->Handle, Chassis & Bar Assembly
· 3050 Gas Saw-->External Power Unit
· PP210 Gas Saw-->Handle, Chassis & Bar Assembly
· PP255 Gas Saw-->Exterior Assembly
· PP295 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1 & 2
· PP295 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1 & 2
· PP310 Gas Saw-->Exterior Assembly
· PP315 Gas Saw-->Exterior Assembly
· PP230 Gas Saw-->EXTERNAL POWER UNIT
· 235 (2008-01)-->Clutch, Drum/Oiler
· 235 e (2008-01)-->Clutch, Drum/Oiler
· 240 (2008-01)-->Clutch, Drum/Oiler
· 240 e (2008-01)-->Clutch, Drum/Oiler
· 137 (2009-03)-->Clutch Drum/Oil Pump and Crankcase
· 142 (2009-03)-->Repair Parts
· 136 LE (2004-03)-->Clutch/Drum & Oil Pump
· 136 LE (California) (2001-06)-->Clutch / Drum / Oiler Assy.
· 137 (2004-10)-->Clutch/Drum/Oil Pump
· 137 (2005-03)-->Clutch / Drum / Oil Pump
· 137 (2005-09)-->Clutch/Drum&Oil Pump
· 137 (2006-01)-->Clutch Drum / Oil Pump
· 137 (2006-12)-->Clutch Drum and Oil Pump
· 137 e (2004-10)-->Clutch/Drum/Oil Pump
· 137 e (2005-03)-->Clutch / Drum / Oil Pump
· 137 e (2005-09)-->Clutch/Drum&Oil Pump
· 137 e (2006-01)-->Clutch Drum / Oil Pump
· 137 e (2006-12)-->Clutch Drum and Oil Pump
· 141 LE (2004-05)-->Chain Case
· 142 (2004-10)-->Clutch Drum/Oil Pump
· 142 (2005-03)-->Clutch/Drum & Oil Pump
· 142 (2005-09)-->Clutch/Drum&Oil Pump
· 142 (2006-01)-->Clutch/Drum & Oil Pump
· 142 (2006-12)-->Clutch Drum and Oiler
· 142 e (2004-10)-->Clutch Drum/Oil Pump
· 142 e (2005-03)-->Clutch/Drum & Oil Pump
· 142 e (2005-09)-->Clutch/Drum&Oil Pump
· 142 e (2006-01)-->Clutch/Drum & Oil Pump
· 142 e (2006-12)-->Clutch Drum and Oiler
· 136 (1998-09)-->Oil Pump & Clutch
· 136 (2001-05)-->Clutch Drum
· 136 (2001-09)-->Clutch/Drum & Oil Pump
· 136 (2003-01)-->Clutch/Drum/Oil Pump
· 136 (2003-06)-->Clutch / Drum & Oil Pump & Crankcase / Oil Tank
· 136 (2004-01)-->Oil Pump & Clutch
· 141 (1998-09)-->Oil Pump & Clutch
· 141 (2001-05)-->Clutch Drum
· 141 (2001-09)-->Clutch/Drum & Oil Pump
· 141 (2003-01)-->Clutch/Drum/Oil Pump
· 141 (2003-06)-->Clutch / Drum & Oil Pump & Crankcase / Oil Tank
· 141 (2004-01)-->Oil Pump & Clutch
· 36 (1994-05)-->Oil Pump/Clutch
· 36 (1997-07)-->Oil Pump Assembly, Crankcase
· 41 (1994-05)-->Oil Pump/Clutch
· 41 (1997-07)-->Oil Pump Assembly, Crankcase
· 136 (1998-09)-->Oil Pump & Clutch
· 136 (2001-09)-->Clutch/Drum & Oil Pump
· 141 (1998-09)-->Oil Pump & Clutch
· 141 (2001-09)-->Clutch/Drum & Oil Pump
· 36 (1991-06)-->Clutch Assembly
· 36 (1994-05)-->Oil Pump/Clutch
· 41 (1991-06)-->Clutch Assembly
· 41 (1994-05)-->Oil Pump/Clutch
· 136 (2001-05)-->Clutch Drum
· 136 (2003-01)-->Clutch/Drum/Oil Pump
· 136 (2003-06)-->Clutch / Drum & Oil Pump & Crankcase / Oil Tank
· 136 (2004-01)-->Oil Pump & Clutch
· 141 (2001-05)-->Clutch Drum
· 141 (2003-01)-->Clutch/Drum/Oil Pump
· 141 (2003-06)-->Clutch / Drum & Oil Pump & Crankcase / Oil Tank
· 141 (2004-01)-->Oil Pump & Clutch
· 36 (1991-06)-->Clutch Assembly
· 41 (1991-06)-->Clutch Assembly
358352
3583523
3583628
3583548
358.352
3583613
3583522
3583618
3583521
3583538
3583626
358351191
3583546
35836171
3583566
35835462
3583628
35835119
3583521
35835119
358.3548
3583582
358.3546
3583518
35835624
358356242
35835218
3583537
35835181
3583528
358358
35836131
3583516
358352161
3583518
3583561
3583615
3583518
3583617
35835268
35835162
358356241
358358
3583617
35835218
35835268
358.3538
358356

 

[sefh3]

I know it's a saw but it's a two stroke. I'm looking for a coil and recoil assembly for an Earthquake 43cc mini tiller. If you have these, PM me. I have parts or $$ to trade for these.

 

[Mastermind]

Just found them. Last poulan bin I looked in.

Are these what you are needing. If so going in mail tomorrow.

I found some in a Stihl 08S K......

Sorry for troubling you to look for em.

 

[tbone75]

I know it's a saw but it's a two stroke. I'm looking for a coil and recoil assembly for an Earthquake 43cc mini tiller. If you have these, PM me. I have parts or $$ to trade for these.

Wonder if any other coils fit? I have a couple out of junk whackers! LOL

 

[Jon1212]

Just found them. Last poulan bin I looked in.

Are these what you are needing. If so going in mail tomorrow.

I found some in a Stihl 08S K......

Sorry for troubling you to look for em.

Randy, you should still get the one's he's offering, if nothing else you could use them to help hold up your socks.

 

[Mac88]

You wouldn't happen to have any Super 2-10A parts (specifically the carb needle 'extensions', springs, and retaining rings) would you? How about a 'short' Mac 10-series chainbrake type clutch cover? I may be able to hook you up with the S25 and S25-CVA parts (with either a Mac parts trade or a trade for some folded green paper).

Eccentric, as much as I'd like to help you, I haven't had my hands on a McCulloch saw in years. I'll check around though.

 

[tbone75]

Randy, you should still get the one's he's offering, if nothing else you could use them to help hold up your socks.

Your bad ! No pie for you! :msp_sneaky:

 

[o8f150]

i know i don't ask for much,,, but i need something for a good friend of mine,, he is an older guy and dropped his ms-390 and cracked the fuel tank,, he apoxyied the oil tank and it is holding but the fuel tank is cracked,,, so i need that assembly to get him up and going,, i have some of that green trashy paper with writing on it and a few things for trade,,, i would really like to do this for him and not charge him anything for it,,, tanks in advance

 

[homelite028]

I need a spike and bolts for my dads p60 pioneer .. one off the p50 p51 p60 p62 other models will fit

 

[Arrowhead]

i know i don't ask for much,,, but i need something for a good friend of mine,, he is an older guy and dropped his ms-390 and cracked the fuel tank,, he apoxyied the oil tank and it is holding but the fuel tank is cracked,,, so i need that assembly to get him up and going,, i have some of that green trashy paper with writing on it and a few things for trade,,, i would really like to do this for him and not charge him anything for it,,, tanks in advance

I think I may have one for you. I'll check in a bit.

 

[thomas1]

Randy, you should still get the one's he's offering, if nothing else you could use them to help hold up your socks.

Jon, your statement was completely unnecessary.

Those are obviously internal snap rings. Mastergrind would need external snap rings to hold his socks. Either is still pointless, he can just tuck his socks into the ID bands.

 

[Mastermind]

I think I may have one for you. I'll check in a bit.

If you don't.....I do.

Jon, your statement was completely unnecessary.

Those are obviously internal snap rings. Mastergrind would need external snap rings to hold his socks. Either is still pointless, he can just tuck his socks into the ID bands.

Welp you and Jon1212 can just GFYs. :msp_smile:

 

[Jon1212]

If you don't.....I do.



Welp you and Jon1212 can just GFYs. :msp_smile:

Randy,
I made a donation on your behalf. I hope it helps.

Mary Cummins Animal Advocates Wildlife Rehabilitation Los Angeles, California: Emu rescue, Animal Advocates, Mary Cummins

 

[o8f150]

thankyou ed and randy,, let me know what either of you need and i will see if i have it,,

 

[tbone75]

thankyou ed and randy,, let me know what either of you need and i will see if i have it,,

Pie ! :big_smile:

 

[o8f150]

Pie ! :big_smile:

now that can be arranged with no problem