the all aussie dribble thread!

[weedkilla]

No its a 281. The ring boss blasted thru the top of the piston and ended up in the bottom end, but I got it all smartened up . It just needs a bath. Lol

I'd be kinda curious what sort of compression a freshened 281 ends up with. Mine is sitting at 155psi while I wait for a ring to arrive and then I'll delete the base gasket.

 

[Gypo Logger]

I'd be kinda curious what sort of compression a freshened 281 ends up with. Mine is sitting at 155psi while I wait for a ring to arrive and then I'll delete the base gasket.

Not sure but comp is high after the gasket delete. I took a silly milimetre off the intake skirt and opened up the muffler accordingly.

 

[2strokenut]

 

[herbs]

Recently bought one of these: http://www.milwaukeetools.com.au/power-tools/cordless/m12-fuel/show/m12chz-0

Primarily for cutting up kindling, does it extremely well on branches an inch or two in diameter, bigger than that can be cut but it's getting a bit much for the little thing.

 

[2strokenut]

i could use one of them at work

 

[herbs]

i could use one of them at work

There's some pretty good deals going around for cordless tools these days, I ended up getting the 12 volt drill and impact driver along with some batteries. Very happy.

 

[Rudolf73]

I think I found a new use for my Dolkita

 

[derwoodii]

I think I found a new use for my Dolkita

that'll test ya filter & wearing parts i's know as use my 310 with tungsten chain like that all the time,,, ********* chewing up dirt not tis an awful thing to do to saw.

 

[derwoodii]

got free neighbors 45 foot gum over today just small climb 1st to get the weight right then soxed it & the lad blocked it up for next years fire wood pile

 

[2strokenut]

I think I found a new use for my Dolkita

very low impact i like it

 

[derwoodii]

rifle club today bloke was blasting one of these martini 45/70 amazin chucks a huge bit of lead think he said 405 grains sinker and 75 grains slow burn powder kaboom smoked like cannon but quieter than 308



vs 22lr

 

[VinceGU05]

Ok guys. Time to bore you to tears with some vids with some test cuts.
First up. Just a muffler mod on the Ozito with the bar and chain that came with it.
Lots of chatter with this chain.


Next up is Ozito with Stihl 1/4" semi and bar. Saw felt great with this. Smooth as silk. And quicker.



Then the 192t with same bar and chain.


And then my mates Talon 35cc black hawk lol. Muffler mod, timing and gasket delete. And a fresh Stihl 3/8 LP semi chain.

 

[chippy]

Ok guys. Time to bore you to tears with some vids with some test cuts.
First up. Just a muffler mod on the Ozito with the bar and chain that came with it.
Lots of chatter with this chain.


Next up is Ozito with Stihl 1/4" semi and bar. Saw felt great with this. Smooth as silk. And quicker.



Then the 192t with same bar and chain.


And then my mates Talon 35cc black hawk lol. Muffler mod, timing and gasket delete. And a fresh Stihl 3/8 LP semi chain.

Great review Vince....

Well the Talon won hands down but has a 50% larger donk...

Between the Stihl and the OZ Racing saw I'd say about even....but the OZ started much easier and sounds better too and costs 9% of the Stihl saw....will the Stihl last 11 times longer? Time will tell
.

 

[chippy]

Re kindling...I just chuck in a few armfuls into the trailer everytime I collect....I use a side kick movement with the cordless Blundstone...never had a problem.

 

[bennn*e]

No its a 281. The ring boss blasted thru the top of the piston and ended up in the bottom end, but I got it all smartened up . It just needs a bath. Lol

I was going to say 288 but it looks older then the one I traded

 

[KiwiBro]

Probably Chinese but perhaps these are cheap GB bars to go with your lil screamers

http://www.gumtree.com.au/s-ad/aber...r-bars-12-14-16-available-15-to-19/1061157656

 

[ausneil 1]

rifle club today bloke was blasting one of these martini 45/70 amazin chucks a huge bit of lead think he said 405 grains sinker and 75 grains slow burn powder kaboom smoked like cannon but quieter than 308
View attachment 431595


vs 22lr
View attachment 431594

A bit of history there mate, I always thought those (martini henry) rifles could blow the load back at the shooter, the way the breech opens ect, I know they can't but with big loads like the 45/70 or bigger I wonder sometimes.
I have seen a little rebarrelled version martini with a light 22 barrel with screw on attachment, just a click and a whack a bit later.

Weren't those old girls black powder jobs originally or were they burning cordite.

 

[ausneil 1]

Ok guys. Time to bore you to tears with some vids with some test cuts.
First up. Just a muffler mod on the Ozito with the bar and chain that came with it.
Lots of chatter with this chain.


Next up is Ozito with Stihl 1/4" semi and bar. Saw felt great with this. Smooth as silk. And quicker.



Then the 192t with same bar and chain.


And then my mates Talon 35cc black hawk lol. Muffler mod, timing and gasket delete. And a fresh Stihl 3/8 LP semi chain.

Good stuff Vince, you keep this up and you could become famous and be chief test pilot or Ozito, thousands will want your autograph and of coarse you will be able to start up your own T shirt line.......... oh and stickers......

 

[chippy]

Probably Chinese but perhaps these are cheap GB bars to go with your lil screamers

http://www.gumtree.com.au/s-ad/aber...r-bars-12-14-16-available-15-to-19/1061157656

Might have to get myself one of these to suit the OZ in 1/4" pitch...

Vince, what length do you think it'll run? 20"?

 

[VinceGU05]

Might have to get myself one of these to suit the OZ in 1/4" pitch...

Vince, what length do you think it'll run? 20"?

Easy. But in wood?[emoji15] full skip [emoji106]