The Farm Tractor in the Woodlot
- Thread starter Gypo Logger
- Start date
Help Support Arborist Forum:
Gypo Logger
Timber Baron
6 pizels! Lol. Read comments.
Here's a few farm tractor in the woods pics .
Sawyer Rob
Addicted to ArboristSite
I skidded out a couple white pines yesterday,
I needed three 4" x 5-1/2" - 10' beams, so I cut one saw log out of the tree on the left,
I'll mill them out, soon... The rest is pretty much firewood,
SR
I needed three 4" x 5-1/2" - 10' beams, so I cut one saw log out of the tree on the left,
I'll mill them out, soon... The rest is pretty much firewood,
SR
Ferguson system
Iggesund Forest dealer
Ferguson Tea 20, 1954 model and 3 Ton timber trailer with wheel drive.
Sawyer Rob
Addicted to ArboristSite
Just in case you wanted to see what I got out of 10'-6" of that log on the left above, here it is...
I milled out (4) 4x5-1/2's,
and (3) 4x4's, as you can see in this pile,
and also a few inch boards that I didn't put in the pict.... Not too bad for a log headed to the firewood pile!!
SR
I milled out (4) 4x5-1/2's,
and (3) 4x4's, as you can see in this pile,
and also a few inch boards that I didn't put in the pict.... Not too bad for a log headed to the firewood pile!!
SR
Sawyer Rob
Addicted to ArboristSite
I split this wagon load of firewood today, in 45 minutes,
MAN, this thing really kicks azz! One pass through the 4-way and keep pushing them off the end of the table grate!
MAN, this thing really kicks azz! One pass through the 4-way and keep pushing them off the end of the table grate!
Sawyer Rob
Addicted to ArboristSite
I had a decent sized tornado damaged white pine out back that I've had my eye on... Anyway, I've been wanting to get it to my mill site and mill into some siding for a project I'm doing,
After cutting my way to it, I got started,
Because I have a skidding winch on my tractor, I cut a larger than normal notch in the tree and hooked the cable from the winch as high as I could reach, and tightened it up, then locking it,
With dead standing/damaged tree's, I wanted that cable tension... Anyway, the tree went over as planned and I then winched it out and off I went to my mill site,
Next will be to cut the logs out of it and mill them into that much needed lumber!
SR
After cutting my way to it, I got started,
Because I have a skidding winch on my tractor, I cut a larger than normal notch in the tree and hooked the cable from the winch as high as I could reach, and tightened it up, then locking it,
With dead standing/damaged tree's, I wanted that cable tension... Anyway, the tree went over as planned and I then winched it out and off I went to my mill site,
Next will be to cut the logs out of it and mill them into that much needed lumber!
SR
Nice day to be skidding some logsHauling some big Ash today
You need to get yourself a winch, Walt
So I picked up an old hydro pole trailer, I can get five 20-24” x 24’ logs on it
Overnight several inches of snow
where is gypo at??????
Idk, haven’t heard from him in a while. Pulled this beast today.hope that Wildman is doing ok....
Similar threads
