What's On Your Bench 7-24-14 ??????

[cgraham1]

I'm tired of Brad........and Brad is sick of me.

You try dealing with that guy for a few years........and good luck to you.

Randy, after dealing with you on my 064, I can't imagine going anywhere else. You'll be getting more business from me in the future, that's for sure.

 

[DexterDay]

Hey, that saw that's front and center looks very familiar. .



Not everyone ads a "Pro" Sticker to a 362C-M.



Can't wait for it to come home.

Thank you Randy..

 

[tallfarmboy]

I am rescuing a MS441 that was totally disassembled and in a bucket... Juttree is hooking me up with the parts I need, just need to find the time to slap the coil on and fire it up.

 

[Rockjock]

I'm tired of Brad........and Brad is sick of me.

No need to reverse engineer anything I've done.......I've probably posted a "how to" thread on nearly every popular saw. If you need a copy of my notes you welcome to those too.

You try dealing with that guy for a few years........and good luck to you.

I just think some compassion goes a long way. But that just me. PTSD mellowed me out quite a bit. lol

 

[tlandrum]

I thought I was the only saw builder in tn burning the way past midnight oil lol I think im going to lock up and go home now. im whipped and ready for a shower

 

[warpig6]

Got the old Homelite up and running for my Grandad Wednesday.

Warpig6

 

[splitpost]

Stihl 026 with a faulty meteor piston,supplied or oem clips wont seat in one of the wrist pin clip grooves,

Sent from my GT-S7500T using Tapatalk 2

 

[nikb47]

New crank bearings and seals going into an MS361, and I just buttoned up my 044. It got some machine work, port work, and new rings.

 

[imagineero]

I don't have a bench any more :-(

Have a mobile truck workshop I'm trying to put together. Toolboxes are in, welder in the back, put a 10kva generator in it yesterday and managed to get holes cut for plumbing the exhaust out, fitted a bigger tank, vents, fans. Waiting on some gaskets and have to find a place externally to mount an exhaust off a VFR800 to run the exhaust into, then cut an access hatch into the roof for filling up the bigger tank.

 

[zogger]

I don't have a bench any more :-(

Have a mobile truck workshop I'm trying to put together. Toolboxes are in, welder in the back, put a 10kva generator in it yesterday and managed to get holes cut for plumbing the exhaust out, fitted a bigger tank, vents, fans. Waiting on some gaskets and have to find a place externally to mount an exhaust off a VFR800 to run the exhaust into, then cut an access hatch into the roof for filling up the bigger tank.

That sounds pretty cool!

 

[lone wolf]

MS 361 no spark turned out he had a bunch of dirt impacted on the coil I cleaned it and its fixed!
Dealer told him there was a hole in the piston so he bought a new MS 390 now he regrets this.

 

[CJ1]

Dang fellas, and all I want is for mine to start, run, and be dead nuts reliable. Replaced my blown up 150 xr6 with the 4 stroke for trolling. Had the carbs rebuilt and sync'ed and the motor serviced....it only had 40 hrs. Now it will run but is a bear to start. All the connections look good and checked out. Well, if it wasn't this it would be something else.

Shea

PM me, I don't want to muck up Randys thread anymore than I already have. May have a fix for you.

 

[zogger]

MS 361 no spark turned out he had a bunch of dirt impacted on the coil I cleaned it and its fixed!
Dealer told him there was a hole in the piston so he bought a new MS 390 now he regrets this.

Hole in the piston? How the heck would the dealer say that unless he saw a hole, which obviously isn't there.

I hope he goes back to the dealer with this. He should get his money back on that 390 and give it back, if he wants it.

 

[imagineero]

That sounds pretty cool!

I kind of miss having a bench honestly. I miss the fridge next to the bench too. It's hard to fit a fridge into a work truck what with tools and all, and needing to drive your bench home doesn't help the situation either. I'll try to get some pics up tomorrow if I remember to.

 

[farmer steve]

so much crap i don't know if the bench is still there.

 

[heimannm]

Something a little bit different, waiting for a pipe to arrive.





Mark

 

[sunfish]

 

[morewood]

Something a little bit different, waiting for a pipe to arrive.

View attachment 360707

Mark

Awesome looking starter handle......isn't it a bit new for that old piece of mag.

Shea

 

[Hedgerow]

Something a little bit different, waiting for a pipe to arrive.

View attachment 360707

View attachment 360708

Mark

Look out Baraboo!!!
Mark's bringin' the heat this year!!!

 

[heimannm]

Awesome looking starter handle......isn't it a bit new for that old piece of mag.

Shea

Just try to pull it over with a normal handle and you will see why...

Mark