Homelite Chainsaws

[RandyMac]

wazzup homies?

 

[CM76]

Early morning antics - Randy is at it again.

6 cube fire fought with 6 cube fire - here we go: Homelite Super 1050

 

[RandyMac]

Yeah, got a bit of the been up all night crazies, for the 4th day in a row.
My weekend starts in about an hour and a half.

 

[tbone75]

Picked up a new to me Homie 150.Not in bad shape just dusty from sitting.Even has a Homie bar on it.

 

[67L36Driver]

Hah! Rings for the ebay XL-101 showed up this morning. Have lots of parts to clean.

We be smilin'.

 

[Ambull]

Picked up a new to me Homie 150.Not in bad shape just dusty from sitting.Even has a Homie bar on it.

Let me know if you need anything. I have three 150 parts saws that I am looking to unload cheap. I have already helped out one AS member. For some reason that saw is a turn off for me. I like Super EZ's and XL-12's much better.

 

[a. palmer jr.]

Let me know if you need anything. I have three 150 parts saws that I am looking to unload cheap. I have already helped out one AS member. For some reason that saw is a turn off for me. I like Super EZ's and XL-12's much better.

And I appreciated the help. The cover worked great on my saw. I'm not a big fan of the 150 either but if it works it works!

 

[Eccentric]

Let me know if you need anything. I have three 150 parts saws that I am looking to unload cheap. I have already helped out one AS member. For some reason that saw is a turn off for me. I like Super EZ's and XL-12's much better.

You're not alone in your Homelite tastes JP!!!

 

[Ambull]

And I appreciated the help. The cover worked great on my saw. I'm not a big fan of the 150 either but if it works it works!

Yeah glad to hear, as I never followed up. Let er rip!!!

 

[tbone75]

Let me know if you need anything. I have three 150 parts saws that I am looking to unload cheap. I have already helped out one AS member. For some reason that saw is a turn off for me. I like Super EZ's and XL-12's much better.

I have 2 of these now so I may need some parts LOL Thanks !!!

 

[watsonr]

Let me know if you need anything. I have three 150 parts saws that I am looking to unload cheap. I have already helped out one AS member. For some reason that saw is a turn off for me. I like Super EZ's and XL-12's much better.

Me too!!:msp_biggrin:

 

[67L36Driver]

Piston rings for C5

Anyone know the thickness of the piston ring for a C5?

1/16"? 3/32"?

 

[67L36Driver]

Is this a K095 mount?
View attachment 198249

Shown on top of an 20" Oregon #200---D196.
Slot is .331" wide. Est. 16", hard nose.
Faint markings: ??29 Homelite
GVA 16503

Was in the box with the ebay XL-101 parts saw. Looks kind of smallish.

 

[a. palmer jr.]

Is this a K095 mount?
View attachment 198249

Shown on top of an 20" Oregon #200---D196.
Slot is .331" wide. Est. 16", hard nose.
Faint markings: ??29 Homelite
GVA 16503

Was in the box with the ebay XL-101 parts saw. Looks kind of smallish.

Isn't that the "medium" size Homelite mount, like they used on the EZ and 150? I figured they used it on the XL 101 also, maybe not.

According to Acres website it fits a Homelite 150, I didn't check any further.

 

[tbone75]

Yeah, got a bit of the been up all night crazies, for the 4th day in a row.
My weekend starts in about an hour and a half.

Cute dog nice saw LOL

 

[briantutt]

Isn't that the "medium" size Homelite mount, like they used on the EZ and 150? I figured they used it on the XL 101 also, maybe not.

According to Acres website it fits a Homelite 150, I didn't check any further.

Here is a pdf Oregon sent me, on the last page it shows K095 mount.

 

[67L36Driver]

Isn't that the "medium" size Homelite mount, like they used on the EZ and 150? I figured they used it on the XL 101 also, maybe not.

According to Acres website it fits a Homelite 150, I didn't check any further.

Google turned this up; "150 Automatic Homelite,its pretty old, ...... to fix this problem? the number on the old bar is W-16503"

I'll look at Acres.

Yup, K095, correct for XL-101.

 

[Ambull]

Just wanted to post a few of my saws.

I did a little work on these two 1020's. The faded one sports a nice 36" roller nose bar. I had to crack the tank and replace the fuel line. I also rebuilt the carb. I put neoprene tubing on the handlebar for a better feel.

The red 1020 is Wildman's old frankensaw. I put the correct starter on it, and repainted a few items to get it looking better. I also wrapped both sides of the handlebar in Neoprene. It has the auto oiler clutch cover, which works well. It has a beautiful 32" Cannon roller nose on it.

I took a quick video of both running, so you can see that these actually are runners, lol. Both started on the first pull. The faded one is running a little rich, as the new carb kit seems to be breaking in.

chainsaw :: 003-7.mp4 video by jmueller57 - Photobucket




Next up is my little brush cutter, my Super EZ PNW edition full wrap. With the safety nose on the bar, it is really effective at brush cutting. I can run it along the barns without haveing to worry about hitting the nose on the barn or foundation.

On the first pull, I forgot to flip the start switch to the "on" position, lol.

chainsaw :: 004-7.mp4 video by jmueller57 - Photobucket

 

[ridgerunner97]

Just scored a 770G off ebay, has a 28in bar with 1/2" chain on it right now. I was wondering if anybody knew if I could convert to 404 or not and if so if their is a source for the drive spurs or sprockets I guess you could call it for the .404 chain.

Also curious what bar mount pattern it takes, with 95cc's and a 2.8:1 gear reduction I'd love to put something in the high 30" range onto it for big stuff, If its like any of these other old gargantuan's I'll have to modify a bar to fit but was wondering what the best mount to start with is.

 

[corsair4360]

Nice XP1000

Brings back memories of my first saw, a XP1000, lots of hours running that monster. Thanks... Eventually I'll find one to reminisce with. Nice pictures of the 1020 and the XP1000.