McCulloch Chain Saws

[Warped5]

Geez, Tim!

First the Homelite thread, now the Mac thread ... what are you posting in the Poulan thread?

Let me know if you need 'bits' for the SP80 .. since you have the 'cold weather' AF cover on it (sharp eye, Joey), you might as well try to pry a cold weather muffler cover from jockeydeuce ... I know he has one.

 

[Warped5]

You can use a sp80, sp81, sp81E, or pm850 muffler. One may turn up one day.

PM850 will fit, but we both know it won't look right. Probably won't fit under the 'cold weather' cover either.

 

[joeymt33]

That's true. Just make the pm850 a last resort for a muffler.

 

[fossil]

It's the box (side) that's rotten so it shouldn't be too hard to repair.
Nothing for the Poulan thread unfortunately. I'm living in a Poulan vacuum area these days so I've had to turn to other neat saws. Leaning more towards the larger saws.
What bar mount is on the SP80 and PM700?

 

[Eccentric]

Hey I spotted the cold weather cover in the kiiji ad pic you sent me.


Bar mount is old Oregon D276, current Oregon D176, or Windsor MXT.

 

[fossil]

Hey I spotted the cold weather cover in the kiiji ad pic you sent me.


Bar mount is old Oregon D276, current Oregon D176, or Windsor MXT.

Not only that. You spotted the cut off full wrap handlebar and the roller starter. You have eyes like a hawk. All that from a photo taken inside a dark 53' highway trailer.

 

[heimannm]

My SP 60 with the wide AF cover and the duct over the muffler. I did not repaint this saw, it came to me just as it is. The AF cover is NOS and the duct came from Fayetteville, NY if I recall.



Mark

 

[Warped5]

Here's a pic of mine. I know that Mark openly lusts over it:

 

[fossil]

Here's a pic of mine. I know that Mark openly lusts over it:

Nice looking saw. Did you repaint it or is that original?

 

[Warped5]

That one's a repaint, Tim.

 

[fossil]

That one's a repaint, Tim.

Looks like a really nice job.

My SP 80 came with the "Body and Duct Assy" PN 84572 and "Cover - muffler" PN 84603.
Is there supposed to be another cover that goes over that?

 

[Warped5]

Looks like a really nice job.

My SP 80 came with the "Body and Duct Assy" PN 84572 and "Cover - muffler" PN 84603.
Is there supposed to be another cover that goes over that?

Yes, there's a cover that goes over the complete muffler ... in the email I sent.

 

[Warped5]

Looks like a really nice job.

My SP 80 came with the "Body and Duct Assy" PN 84572 and "Cover - muffler" PN 84603.
Is there supposed to be another cover that goes over that?

.. and I'll be da**ed! The cover for the SP80 is different than the one for the SP60!

See how the cover over the muffler feeds warm air to the carb box? The one for the SP80 is different from this .... NEW project on the horizon ....

 

[Eccentric]

Not only that. You spotted the cut off full wrap handlebar and the roller starter. You have eyes like a hawk. All that from a photo taken inside a dark 53' highway trailer.

 

[sefh3]

I left my fuel cap for the Super 55 at home and I need to stop and get an O ring for it. Does anyone know what size O ring will work?

 

[Warped5]

I left my fuel cap for the Super 55 at home and I need to stop and get an O ring for it. Does anyone know what size O ring will work?

This isn't NASA over here today .... but I get 38.6mm ID with a 3.5mm thickness.
Hope this helps!

 

[joeymt33]

NASA is in Alabama, about 30 minutes from me. Maybe I should have gave him the exact measurement. : )

 

[sefh3]

This isn't NASA over here today .... but I get 38.6mm ID with a 3.5mm thickness.
Hope this helps!

Close to NASA measurements are close enough for me. Thank you!!!!!!

 

[sefh3]

NASA is in Alabama, about 30 minutes from me. Maybe I should have gave him the exact measurement. : )

I have family in Guin Alabama. They would tell you it's about yeah big by yeah big......

 

[heimannm]

The bolt pattern on the SP60 muffler is vertical, the bolt pattern on the 82 cc mufflers like the SP80 is horizontal, yes it require a different duct assembly. The SP60 ducts were easy to find, the SP80 ducts, no so much...

Ted's SP60 with both hand guards, the rubber grip, and the cold weather kit is a rare bird indeed. Perhaps I did drool just a little.

Mark