McCulloch Chain Saws

[singinwoodwackr]

McCulloch Super 44 is my guess.

What size saw would it be? Worth restoring? Looks like all the parts are there.
Chain looks like 404

 

[Breckinridge Elkins]

What size saw would it be? Worth restoring? Looks like all the parts are there.
Chain looks like 404

Could be 404x063" chain. I have one like that.

 

[knightmax]

Thanks Jeff,but I'm kinda bummed right now.
I got ripped off again.I went to get my 610 build out to put a new crank seal in it & it's nowhere to be found.I had it in a box in my shed which was locked up.Also missing is my Super 2-10 & 3-10 & my E.B.2.0.This really pisses me off! The 610 is missing the FW,it's sitting on my outdoor work table.The 2-10 & 3-10 are both missing carbs.The E.B.2.0 was complete & ran great.Whoever stole those saws must be good at picking a lock.
Earlier this yr.they stole my DE80 carcass,along with 2 Homie 410s & a 450 carcass.

That is awful. I am sorry!

 

[Rotax Steve]

Ok, what did I just get?
Haven't cleaned anything yet so can't see any numbers.

Went out to a guy's farm to help cut a log pile...came home with a pile of small saws, and this old Mac.
It turns over and seems to have stupid compression.
View attachment 1115790View attachment 1115791View attachment 1115792View attachment 1115793View attachment 1115794

Looks like a Super 44A ???

 

[heimannm]

With the grill it is either a Super 44 or more likely Super 44A.

There should be a model number stamped on the bottom of the crankcase.



Mark

 

[piglosi]

Ok, what did I just get?
Haven't cleaned anything yet so can't see any numbers.

Went out to a guy's farm to help cut a log pile...came home with a pile of small saws, and this old Mac.
It turns over and seems to have stupid compression.
View attachment 1115790View attachment 1115791View attachment 1115792View attachment 1115793View attachment 1115794

I see a Super Ez. I like those little buggers!

 

[singinwoodwackr]

I see a Super Ez. I like those little buggers!

want another? will cost you freight and beer$

 

[singinwoodwackr]

With the grill it is either a Super 44 or more likely Super 44A.

There should be a model number stamped on the bottom of the crankcase.

View attachment 1115846

Mark

Don't see an 'A' but definitely a 44

Fuel cap shattered trying to remove it

Any issue with pressure washing the outside?

 

[heimannm]

I have heard they put the grill (hockey mask) on some Super 44's as well but I've only encountered them on the A's.

The 44A is 80 cc (2.125x1.375) and the Super 44A is 87 cc (2.125x1.5).

Either way, they are a lot like running a flat head V8, lots of guts.

Mark

 

[singinwoodwackr]

I have heard they put the grill (hockey mask) on some Super 44's as well but I've only encountered them on the A's.

The 44A is 80 cc (2.125x1.375) and the Super 44A is 87 cc (2.125x1.5).

Either way, they are a lot like running a flat head V8, lots of guts.

Is the letter before the 44 an S?
Hard to tell.

Mark

 

[heimannm]

You may find that a pressure washer also removes paint, but it would likely come off with other cleaning methods as well. Plug the carburetor and muffler/exhaust as best you can can use some fogging oil, WD40, etc. in the crankcase and cylinder once you are done.

I'm going to say that is a "S" that was not stamped quite right.

Mark

 

[piglosi]

want another? will cost you freight and beer$

Wow, that’s the perfect price, but I’m gonna pass. Thank you. I’m on the Mac 120 mission this wkend.

 

[Jeffrey F.]

Thanks Jeff,but I'm kinda bummed right now.
I got ripped off again.I went to get my 610 build out to put a new crank seal in it & it's nowhere to be found.I had it in a box in my shed which was locked up.Also missing is my Super 2-10 & 3-10 & my E.B.2.0.This really pisses me off! The 610 is missing the FW,it's sitting on my outdoor work table.The 2-10 & 3-10 are both missing carbs.The E.B.2.0 was complete & ran great.Whoever stole those saws must be good at picking a lock.
Earlier this yr.they stole my DE80 carcass,along with 2 Homie 410s & a 450 carcass.

That sucks, when it rains it pours good or bad. If you need a saw you can have my 650. Runs great I'll never cut any wood again, my hands are shot.

 

[edju1958]

That sucks, when it rains it pours good or bad. If you need a saw you can have my 650. Runs great I'll never cut any wood again, my hands are shot.

Thanks for your offer Jeff,but I have plenty of saws that run just fine.Those saws that were stolen were my project saws for when my hand got better.I'm starting to work on saws again now,just the little guys that need light work done.I mostly have Homies to work on.I have a follow up appointment with my dr.tomorrow.I think he'll be quite surprised.

 

[Jeffrey F.]

Okay, is your son or you interested in my Stihl 038 Mag ll. I could bring it out if you want.

 

[edju1958]

I was told by my dr.that I wouldn't be doing any wood cutting till about mid - late Nov.I proved him wrong yesterday.My son & I went out cutting & brought home a load of ash.I wasn't using a big heavy saw,just a little Stihl 017.Regardless,I was out cutting only 6 weeks after the surgery.We split the wood too & my son left for a previous engagement leaving the stacking to me.A couple of cord may not seem like a lot to you young bucks,but for an old crippled geezer like me it's a workout,Lol.It felt good to be "back in the saddle" again.

 

[Syncop8r]

Perhaps your Dr meant you shouldn't be doing any woodcutting until then?

 

[edju1958]

Perhaps your Dr meant you shouldn't be doing any woodcutting until then?

Umm,isn't that what I said?

 

[bob kern]

I was told by my dr.that I wouldn't be doing any wood cutting till about mid - late Nov.I proved him wrong yesterday.My son & I went out cutting & brought home a load of ash.I wasn't using a big heavy saw,just a little Stihl 017.Regardless,I was out cutting only 6 weeks after the surgery.We split the wood too & my son left for a previous engagement leaving the stacking to me.A couple of cord may not seem like a lot to you young bucks,but for an old crippled geezer like me it's a workout,Lol.It felt good to be "back in the saddle" again.

Show em how it's done hoss!!

 

[Syncop8r]

Umm,isn't that what I said?

No - you said wouldn't.
If you can, doesn't mean you should. Go easy on it!