McCulloch Chain Saws

[heimannm]

I was looking around and found a Super pro 125 coming up far sale soon. What is the desire level on this model?

How far would you drive to posiible get one near you?

Any value on them in fair to good condition?

Just trying to weigh my odds on the effort to get it if it works out.

E-bay prices are crazy lately, but don't let that one get away if it can be picked up for a reasonable price. If it happens to be a ways to the east of you let me know, I can always take a look...

Mark

 

[a. palmer jr.]

E-bay prices are crazy lately, but don't let that one get away if it can be picked up for a reasonable price. If it happens to be a ways to the east of you let me know, I can always take a look...

Mark

It's been my considerable experience that ebay prices are only high if I'm the fellow buying. When I'm selling it's a different story..

 

[promac850]

Tell you what Kyle. I like your enthusiasm. I'll send you a 790 IPL IF you promise to never ever ever ever use the brainless text-speak term "pwn" or "pwnage" again in this or any other chainsaw thread. We're not talking fart-pipe sport-compact cars here. Remember, "pwn" has no place where PBR's are consumed...

Make your promise, and then PM your email addy to me...

Oops, did not know that word was in the stupid ricer community. My bad. :bang: Won't say it again. I didn't think before I posted... :bang:

Here, how bout this... Go forth and beat the #### out of some creamsickles...

Is that PBR approved speak? :msp_unsure:

 

[HeRoze]

New avatar Damn you Mac heads now I am going to have to buy more yellow saws, my wife is going to divorce me or maybe i will get lucky and she will just tell me NO!:yoyo:

Yea, that. Tuesday I get home to find the second box o' saw (thx Cliff and Chris!). My wife tells me I'm going to have to give the postman a Christmas present and that she doesn't know what I am doing. I promise her that is the last big box that I know about.

Yesterday postman comes to the door again with my Mac IPL cd, the new calipers, and the 4 1/2" cutoff blade.

*sigh*

 

[cpr]

I was looking around and found a Super pro 125 coming up far sale soon. What is the desire level on this model?

How far would you drive to posiible get one near you?

Any value on them in fair to good condition?

Just trying to weigh my odds on the effort to get it if it works out.

Condition and price weigh in, but for a fair price, decent (not necessarily good) one, I'd have no problem going anywhere in LP MI (and that's not a small area considering I'm as far east as you can go without saying "eh?" at the end of everything :hmm3grin2orange.

 

[RandyMac]

I like my bar to reach all the way through my firewood. I need to find a find a 16" bar with a roller nose that fit's a 10 series saw and is .063 gauge. That might be hard to do.

I thought I had one, but nothing that short, 20" maybe, large mount is all I found.

 

[struggle]

Thanks for the info on the SP125 I will go for it but it is out couple of weeks until it is available. You will know if I get it.

 

[Duke Thieroff]

Yea, that. Tuesday I get home to find the second box o' saw (thx Cliff and Chris!). My wife tells me I'm going to have to give the postman a Christmas present and that she doesn't know what I am doing. I promise her that is the last big box that I know about.

Yesterday postman comes to the door again with my Mac IPL cd, the new calipers, and the 4 1/2" cutoff blade.

*sigh*

You're welcome bud. Hope you get 'er running tip top.


Chris

 

[Rounder]

A friend dropped these off today, barely used. No interest in them, but I'll keep the PM 605 as a loaner. I'll probably dump the other one on the shop I deal with. We play a fun little game of giving each other stuff we don't want.....I usually come out a lot better than they do - Sam

 

[RandyMac]

I think you need a sturdier bench top.

 

[Rounder]

What?....You don't approve of my junk show?..lol..I know, I know.....Someday. Milled that pine slab myself. It works for now.

 

[wendell]

Those saws do look like they are getting ready to fall through.

 

[RandyMac]

Just kidding Sam, nice slab.

My bench is 24"X8', top is old rough sawn 2X12" OG Redwood, probably weighs 200 pounds. The supports are OGDF beams.
No pics, it's buried in saw parts. I have lots of heavy lumber, no sense in skimping.

 

[Teddy.Scout]

That bench will last 3+ generations!!!!!!!!!!!

Nice slab!

 

[Rounder]

Randy, jeezus...I'm a little slow tonight, lol. Spent a second week up North in snow over my waist falling nasty lodgepole. Just got back from dinner with wife. I dropped a very large/greasy/saucy burger right in my lap, I was so damn burnt out. Like I said, a little on the slow side tonight.....usually am, lol. Take care pard - Sam

 

[Eccentric]

hhhmmm...

:taped:Quiet you!
I'm not asking for free saws. Just tried to buy couple cool collector saws that were way out of my league during this 'silly saw season'...:msp_tongue:

I was looking around and found a Super pro 125 coming up far sale soon. What is the desire level on this model?

How far would you drive to posiible get one near you?

Any value on them in fair to good condition?

Just trying to weigh my odds on the effort to get it if it works out.

It bears repeating Shane. You've got the gift.:msp_thumbup:

Oops, did not know that word was in the stupid ricer community. My bad. :bang: Won't say it again. I didn't think before I posted... :bang:

Here, how bout this... Go forth and beat the #### out of some creamsickles...

Is that PBR approved speak? :msp_unsure:

Well that's better Kyle. "Go forth and whup some creamsickles" would have worked too...

"My bad" is not allowed however. I hear that one far too much at work...


IPL will be on the way shortly...

 

[caleath]

My first Mac orphan...not sure what to do with it.

 

[promac850]

My first Mac orphan...not sure what to do with it.

Port and polish it, and go cut some wood!!

 

[djones]

might make a good boat anchor

 

[promac850]

might make a good boat anchor

Well, send them all my way. I'll give them a home.