Nik's Poulan Thread

[ILikesEmGreen]

And here's one I'm grabbing. Not listed anywhere so don't bother looking. One owner 4900.

Hmmm... Just saw that one on fb... Starting to either feel like a twilight zone or groundhog day. Hahaha

Sent from my E6782 using Tapatalk

 

[OhioGregg]

Here is a pic of what these saws usually look like that had a bow setup on them at one time. The clutch cover and lip on the edge of case are both ground out for clearance.

Gregg,

 

[Guido Salvage]

All the pictures I've found with bows just have the regular cover.

You need the notch due to the angle of the bow. You can see it on my 4400 below.

Yes all metal, all the paint is worn and someone sprayed the top orange.

Could be off a Dayton saw as well.

 

[echoshawn]

Hmmm... Just saw that one on fb... Starting to either feel like a twilight zone or groundhog day. Hahaha

Sent from my E6782 using Tapatalk

Lol it's my local buddy. He's been teasing me with it for over a week. He's a husky/stihl guy.

 

[echoshawn]

You need the notch due to the angle of the bow. You can see it on my 4400 below.

View attachment 460968



Could be off a Dayton saw as well.

It was painted, paint dripped onto the muffler. I was thinking Dayton too when I first saw the ad.

 

[echoshawn]

Now I just gotta get someone to buy my p40 so I can get the 4900!

 

[blk05crew]

Well I'll have to take a closer look at that clutch cover, maybe it's for something else but it looks factory cut to me. I'll post better pics of it later.

 

[ILikesEmGreen]

Now I just gotta get someone to buy my p40 so I can get the 4900!

Good luck! Seems like the price is rising on that one as we speak... Lol

Sent from my E6782 using Tapatalk

 

[Acornhill]

Since we are all in show n tell mode

And yes she is running in the pic

Sent from my LG-D800 using Tapatalk

 

[echoshawn]

Good luck! Seems like the price is rising on that one as we speak... Lol

Sent from my E6782 using Tapatalk

Yeah, I'm sure it's gone. Screw it.

 

[RedneckChainsawRepair]

Make that 5 out of last 6 have been green tanks I have seen. This one followed me home.

whoever said they were rare.

 

[rms61moparman]

Make that 5 out of last 6 have been green tanks I have seen. This one followed me home.

whoever said they were rare.

Not "Rare" at all.
Somewhat uncommon in some parts of the world.
Just a fantastic saw either way!!!


Mike

 

[RedneckChainsawRepair]

Not "Rare" at all.
Somewhat uncommon in some parts of the world.
Just a fantastic saw either way!!!


Mike

Tell me about it. I couldnt believe someone was trying to say they were rare.

The reason they were saying it I believe is they were also selling a green tank version.

 

[RedneckChainsawRepair]

The last few has had the small dawg on them too. Thats a plus in my book over that monster one.

 

[blk05crew]

Pulled the cylinder last night on the 4200 I picked up yesterday. Piston has some carbon marking on it but is still smooth. Both rings are slightly stuck in one spot. Then on the cylinder you can see 2 different spots where there looks like little chunks missing. You can also see in the cylinder the 2 white spots and those are actually low spots and that is where the piston is really dark from that on the back side. It ran pretty good before I pulled so I think I'll try and free the rings, clean the carbon up some and run it and see what happens.

 

[fossil]

4200 rings are still available from Poulan @ $7.46 ea

 

[Acornhill]

Clean it all up I would put a set of rings in it.

Sent from my LG-D800 using Tapatalk

 

[blk05crew]

Thanks guys, will do. Didn't know rings were still available.

 

[fossil]

Pistons are as well @ $35

 

[Acornhill]

I have two sets for my 4200 6900 4400 fleet

Sent from my LG-D800 using Tapatalk